Grounding & Electrical Requirements. Ginnys EDF-3060

4

PART NAMES & CONTROL PANEL

11

10 9

8 7 6

2

5

4

3

1. Carrying Handle

2. Fryer Main Body

3. Basket Handle

4. Oil Container

5. Frying Basket

6. Heating Element

7. Red Ready Light

8. Temp. Control

9. Power Light

10. Power Cord

11. Handle on Lid

12. Fryer Lid

13. Peg Stand Feet

14. Ventilation Holes

15. Safety Heat Switch

16. Magnetic Detachable

Power Cord

12 14 13

1

16

15

INSTALLATION

BEFORE USING FOR THE FIRST TIME:

• Remove all printed documents and any other packaging materials.

• Pull out all removable parts and wash gently with hot water.

Do not immerse the power cord or the Control Box Assembly &

Heating Element of the deep fryer into ANY liquids.

• Dry all parts thoroughly before assembling.

• Do not operate the fryer without enough oil in the oil tank.

• The Deep Fryer should always be placed on a flat and stable surface

where the power cord is out of reach of children from entanglement.

Tips:

• When you fry several different kinds of food, always fry the food that

uses the lowest temperature setting first.

• Do not mix different types of oil for frying.

• Frying pre-cooked foods may take less time to fry than raw food.

• Replace the oil after each 10-15 uses; before the oil becomes brown

and thick.

4

GROUNDING

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electrical shock by proving an escape wire for the electrical current.

WARNING: Improper use of the grounding plug can result in a risk of electrical shock.

Consult a qualified electrician if the grounding instructions are not completely understood.

1. If it is necessary to use an extension cord, use only a 3-wire

extension cord that has a 3-blade grounding plug and a 3-slot

receptacle that will accept the plug on the appliance.

The marked rating of the appliance, OR

2. Do not use an extension cord. If the power supply cord is too

short, have a qualified electrician install an outlet near

the appliance.

ELECTRICAL REQUIREMENTS

WARNING: This product is equipped with a polarized plug (one blade

is wider than the other) to reduce the risk of electrical shock.

This is a safety feature. The plug will fit into a polarized outlet

only one way. If you are unable to insert the plug into the

electrical outlet, try reversing the plug. If the plug still does not fit,

contact a qualified electrician. Never use the plug with an

extension cord unless you can fully insert the plug into the

extension cord. Do not alter the plug. Do not attempt to defeat

the safety purpose of the polarized plug.

1. A short power-supply cord is provided to reduce risks of injuring

yourself from becoming entangled or tripping over a longer cord.

2. This model has a detachable power cord with a magnetic plug

end that attaches the power cord to the Control Box .

3. Longer extension cords are available and may be used if you

exercise caution during use.

4. If a longer cord is used please note the following:

• The marked electrical rating of the extension cord should be at

least as great as the electrical rating of the appliance.

• The longer cord should be arranged so that it will not drape over

the counter top of tabletop where it can be pulled on by children

or tripped over.

5 5