DIC Programming. Buick LeSabre 2004, 2004 LeSabre
Add to My manuals20 Pages
Buick 2004 LeSabre offers a wide range of features to ensure a comfortable and enjoyable driving experience. It features an instrument panel with a cluster displaying essential information like speed, fuel level, and engine temperature. The audio system includes an AM/FM stereo with cassette tape and CD player, providing various entertainment options. The dual automatic climate control allows you to set and maintain your preferred cabin temperature, while the power seat controls enable you to find the most comfortable driving position.
advertisement
15778 LeSABRE GUIDE 5/22/03 1:55 PM Page 17
17 average fuel economy is displayed in the DIC to learn what the average fuel economy is from a new starting point.
• Press the GAGE INFO button to display oil pressure, coolant temperature, battery state, oil life index and tire pressure information.
• Press the RESET button, along with other buttons, to reset system functions.
After an oil change:
• Press and hold the RESET button while the oil life index is displayed in the DIC. After 5 seconds, the oil life will change to 100%.
• Press the ENG/MET button to change the display to either English or metric units.
See Section 3 of your Owner Manual.
DIC Programming
DIC Personal Choice Programming
The DIC can be used to program the following features for two drivers:
• Outside Curb View Assist Mirror
• Automatic Door Locks
• Delayed Locking
• Security Feedback
• Perimeter Lighting
• Memory Seats
• Window Lockout
• Driver ID
• Language Selection
The DIC recognizes the drivers as
Driver #1 and Driver #2 (Memory 1 and
Memory 2).
Each key fob/transmitter is unique and marked with either a #1 or #2 on the back.
To program and recall your personal choice features:
Turn the ignition ON and place vehicle in
PARK (P).
1. To inform the DIC which driver you are, press the appropriate memory seat control button, or press the unlock symbol on your key fob/ transmitter.
2. Press and hold ENG/MET for 5 seconds. “Welcome to Buick Options
Feature” will appear on the DIC display. The next display will be your driver number. Press ENG/MET to select the feature you want to program.
Follow the display information for each feature. Press RESET to save the selection and advance to the next button.
When finished programming, “Options
Feature Selection Done” will appear on the DIC display.
To exit without programming each personal choice feature:
Press another DIC button or turn the ignition to OFF. Your selections will be retained.
15778 LeSABRE GUIDE 5/22/03 1:55 PM Page 18
18
Getting to Know Your 2004 LeSabre
Outside Curb View Assist Mirror
To tip the passenger mirror down when the vehicle is in REVERSE (R):
Tilt Mirrors (OFF/ON).
• Press ENG/MET to select OFF or
ON. Press RESET to record your choice and advance to the next feature.
Automatic Door Locks
To make the doors lock or unlock when the vehicle is in PARK (P):
• AUTO DOOR LOCKS (OFF/ON)
Press ENG/MET to select OFF or
ON.
If you select OFF, there will be no door locking feature.
If you select ON for AUTO DOOR
LOCKS, the doors will lock when you shift out of PARK (P).
Press RESET to record your choice.
• UNLOCK IN PARK (OFF/ON) Press
ENG/MET to select OFF or ON.
If you select OFF for UNLOCK, there will be no automatic door unlock feature.
If you select ON for UNLOCK and
ALL for DOOR TO UNLOCK, all the doors will unlock when you shift into
PARK (P).
Press RESET to record your choice.
• DOOR TO UNLOCK (ALL/DRIVER)
Press ENG/MET to select ALL or
DRIVER. Press RESET to record your choice.
Delayed Locking
To delay the locking of the doors by 5 seconds after the power door lock switch is pressed:
• DELAYED LOCKING (OFF/ON)
Press ENG/MET to select OFF or ON.
If you select OFF for DELAYED
LOCKING, there will be no delayed locking feature.
If you select ON for DELAYED LOCK-
ING, the doors will lock 5 seconds after pressing the door lock switch.
Press RESET to record your choice.
Security Feedback
To sound the horn and/or flash the exterior lamps when you press LOCK or
UNLOCK on the key fob/transmitter:
• KEYLESS FEEDBACK (OFF/ON)
Press ENG/MET to make your selection.
If you select OFF for KEYLESS
FEEDBACK, there will be no feedback.
If you select ON for KEYLESS
FEEDBACK, you will also need to select LIGHTS or LIGHTS + HORN.
Press RESET to record your choice.
• LIGHTS FEEDBACK (OFF/ON)
Press ENG/MET to select LIGHTS or
L + HORN.
If you select ON, the lights will flash twice.
If you select L + HORN, the lights will flash and the horn will chirp once.
Press RESET to record your choice.
• HORN FEEDBACK (OFF/ON) Press
ENG/MET to make your selection.
If you select OFF for HORN FEED-
BACK, there will be no feedback.
If you select ON for HORN FEED-
BACK, the horn will chirp once.
Press RESET to record your choice.
15778 LeSABRE GUIDE 5/22/03 1:55 PM Page 19
19
Note: If you desire perimeter lighting, you must select LIGHTS for UNLOCK
FEEDBACK.
Perimeter Lighting
To turn the headlamps, parking lamps and backup lamps on when you press on the key fob/transmitter:
1. PERIMETER LIGHTS (OFF/ON)
Press ENG/MET to select OFF or
ON.
If you select OFF for PERIMETER
LIGHTS, there will be no perimeter lighting.
If you select ON for PERIMETER
LIGHTS, the lights will illuminate.
Press RESET to record your choice.
Memory Seats Recall
To recall the position of your seat and mirrors when you press unlock on the key fob/transmitter:
1. SEAT RECALL (OFF/ON) Press
ENG/MET to select OFF or ON.
If you select OFF for SEAT RECALL, there will be no seat recall feature.
If you select ON for SEAT RECALL, the seat and mirrors will move to their preset memory positions when the vehicle is unlocked using the key fob/transmitter.
Press RESET to record your choice.
2. RECALL POSITION MEMORY
(EXIT) Press ENG/MET to select
MEMORY or EXIT.
If you select MEMORY for RECALL
POSITION, the seat and mirrors will move to their preset memory positions.
If you select EXIT for RECALL POSI-
TION, the seat and mirrors will move to their preset exit positions.
Press RESET to record your choice.
Window Lockout
To select the number of passenger windows you want to prevent from being opened:
1. WINDOW LOCK (R+ PASS/REAR)
Press ENG/MET to select R+ PASS or REAR.
If you select R+ PASS for WINDOW
LOCK, all three passenger windows will lock out.
If you select REAR, the two rear windows will lock out.
Press RESET to record your choice.
See your Owner Manual for Driver ID and
Language Selection programming.
Note: This feature is activated by pressing the WINDOW LOCK switch on the driver’s door.
advertisement
Related manuals
advertisement
Table of contents
- 2 Instrument Panel
- 3 Instrument Panel Cluster
- 4 Audio Systems
- 6 Climate Controls
- 7 Power Seat Controls
- 7 Heated Seats
- 8 Door Locks and Child Security
- 8 Mirrors
- 9 Window Controls
- 9 Sunroof
- 10 Lamp Controls
- 10 Turn Signal/Multifunction Lever
- 11 Cruise Control
- 11 Headlamps — High Beam
- 12 Trunk and Fuel Door Releases
- 13 Convenience Features
- 14 Communication System
- 14 Head-Up Display (HUD)
- 15 Universal Transmitter
- 16 Driver Memory Seat and Mirrors
- 16 Driver Information Center (DIC)
- 17 DIC Programming
- 20 Roadside Assistance Program
- 20 My GMLink