Using the Power Saving Function
Using the Power Saving Function
You can save battery power by setting the LCD monitor to turn off automatically when no operations have been performed for a predetermined time period. After the power saving function is activated, you can turn the LCD monitor on again by pressing any button on the camera.
1
Press the 3 button.
The [Menu] appears.
2
Touch [Setting].
• The Setting screen appears.
• If the desired icon does not appear, touch the arrow icons (qr) to advance the screen.
3
Touch q or r.
The next page of the Setting screen appears.
4
Touch [Power Saving].
The Power Saving screen appears.
5
Choose the duration time until the
LCD monitor turns off.
• Select [30sec], [20sec], [15sec], [10sec],
[5sec], or [Off].
• The setting is saved and the screen returns to the previous screen.
6
Touch
The camera returns to Capture mode.
30sec
10sec
Power Saving
20sec
5sec
15sec
Off
Memo
Power Saving does not function in the following situations:
• when using the AC adapter
• while recording a movie
• in playback mode
• during video output
6
163
