Sandvik LH307
Main dimensions
Total length
Width without bucket
Maximum width
Height without safety canopy
Height with safety canopy
Weights
Operating weight
8631 mm (340")
2136 mm (84")
2236 mm (88”)
1720 mm (68”)
2 212 mm (87")
Total loaded weight
Shipping weight
18 020 – 19 600 kg
(39 730 – 43 210 lb)
24 720 – 26 300kg
(54 500 – 57 980lb)
17 950 – 19 550 kg
(39 570 – 43 100 lb)
Axle weights without load:
Front axle
Rear axle
Axle weights with load:
Front axle
Rear axle
Capacities
Tramming capacity
Breakout force, lift
Breakout force, tilt
Tipping load (straigth)
Bucket std.
7 950 kg (17 500 lb)
10 070 kg (22 200 lb)
18 050 kg (39 800 lb)
6 670 kg (14 700lb)
6700 kg (14 800 lb)
134 kN (13 700 kg) (30 200 lb)
112 kN (11 400 kg) (25 100 lb)
16 070 kg (35 430 lb)
3,0 m³ (3.9yd³), GET-abrasion system
Bucket motion times
Raising time
Lowering time
Tipping time
6,5 sec.
3,8 sec.
2,0 sec.
Driving speeds forward and reverse
1 st
2 nd
gear
gear
3 rd
4 th
gear
gear
4,8 km/h (2.9 mph)
9,5 km/h (5.9 mph)
16 km/h (10.0 mph)
26 km/h (16.2 mph)
Frame
Rear and front frame
Central hinge
Welded steel construction
Fully sealed, adjustable upper bearing
Standard engine
Diesel engine
Output
Torque
Number of cylinders
Displacement
Cooling system
Combustion principle
Electric system
Air filtering
Exhaust system
Fuel tank capacity
Cooling
Standard converter
Dana C273.1
Gearbox
Dana R32421
Mercedes Benz OM 906 LA
Euro Stage III / Tier III
150 kW / 2200 r/min (201 hp)
750 Nm 1400 r/min
Inline 6
6 400 cm³
Water cooled
Direct injection, four stroke
24V
Donaldson ”Power Core”
Double wall exhaust pipes, catalytic purifier and muffler
210 l (55 gal.)
Hydraulic fan drive
TECHNICAL SPECIFICATION
LH307-09 (23.11.2010)
2/3
Standard axles
Front axle Dana, 37RM116, fixed
Posi-Stop brakes
Rear axle
Posi-Torq (w/o spring) differential
Dana, 37RM116, oscillating ± 8°
Posi-Stop brakes,
Posi-Torq (w/o spring) differential
Standard tyres
Size and type 17.5x25 L5S, 20 ply
Brand and type subject to availability
Other type of tyres available to user’s choice. In certain applications the productive capabilities of the loader may exceed the TKPH value given by tyre manufacturer.
Sandvik Mining and Construction Oy recommends that the user consult their tyre supplier to evaluate conditions and to find the best solution for application.
Operators compartment
ROPS/FOPS certified canopy
Width
Height
2136 mm (84”)
2212 mm (87“)
Steering hydraulics
Centre-point articulation, power steering with two double acting cylinders. Steering system is equipped with electric controlled joystick. Emergency steering is optional.
Turning angle
Turning radius (with std bucket):
±42,5° inner outer
Main components in steering system:
3043 mm (119")
5812 mm (228")
Main valve
Pilot control valve
Steering cylinders
Steering and pilot hydraulic pumps
ø100 mm (3.9")
Gear type
Pressure settings:
Steering hydraulics, main relief valve 22,0 MPa(220bar)
Shock load valves 12,5 MPa(125bar)
Bucket hydraulics
Monostick bucket and boom control (electric) equipped with gear pump that delivers oil to the bucket hydraulic main valve. The oil flow from steering hydraulic pump is directed to bucket hydraulics when steering is not used.
Main components:
Lift cylinders (2 pcs) ø 140 mm (5.5")
Tilt cylinder
Pilot control valve
Main valve
Pump for bucket hydraulics
ø 200 mm (7.9")
Gear type
Fittings ORFS
Hydraulic oil tank capacity Appr. 230 l (61.8 gal)
Oil cooler for hydraulic and transmission oil.
Capability up to 52°C ambient temperature
Lift arm safety lock (CEN).
Pressure setting for:
Pilot circuit
Bucket hydraulics
Shock load valves
3.5 Mpa (35 bar)
21.0 Mpa (210 bar)
25.0 Mpa (250 bar)
Power shift transmission with modulation, four gears forward and reverse, automatic gear control
Sandvik Mining and Construction reserves the right to change this specification without further notice
ISO 9001 ISO 14001
Sandvik Mining and Construction Oy
P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130 www.smc.sandvik.com
CERTIFICATED
FIRM
CERTIFICATED
FIRM
