advertisement
DAB display information
When listening to a DAB station you can change the information that will appear on the second line of the display� There are several diferent types of information that are sent by the broadcaster�
• Dynamic Label Segment (DLS)
This is scrolling text information supplied by the broadcaster� Information could be the name of an artist or music title, DJ’s name, contact details for the radio station etc�
• Signal Strength
An empty will appear on the second line of the display to indicate the minimum signal strength for acceptable listening� The row of solid rectangles indicate the actual signal strength that you are receiving� The stronger the signal, the further to the right the row of solid rectangles will be�
• Program Type (PTY)S
Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Multiplex Name
Displays the broadcasting area and collection of radio stations on this frequency eg: BBC National DAB, Digital 1 Network�
Channel and Frequency eg: 12B 225�64 MHz
• Signal error
This is displayed as a number between 0-99� It would not be possible to satisfactorily listen to a ratio station with a signal error rate of 30 or above� Try adjusting the aerial or relocating your radio to improve reception�
• Signal information
The data rate at which the signal is being transmitted�
• Time
Supplied by the broadcaster�
• Date
Supplied by the broadcaster�
1� Press and release the ‘Info’ button repeatedly to move through the display options�
9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Where to put your radio
- 3 Setting up
- 5 Your Stereo DAB / FM radio
- 6 Using your DAB radio
- 6 Switch on
- 6 Switch of
- 6 Adjusting the volume
- 6 Changing DAB stations
- 6 Scanning for DAB stations
- 7 Manual tune
- 7 Prune DAB stations
- 8 Storing a DAB station preset
- 8 Tune to a DAB preset station
- 9 DAB display information
- 10 Dynamic range control (DRC)
- 11 Using the FM radio
- 11 FM radio mode
- 11 Tuning to an FM station
- 11 Changing the scan setting
- 12 Storing an FM station preset
- 12 Tune to an FM preset station
- 13 FM display information
- 14 Set the time and date
- 15 Setting an alarm
- 16 Stop the alarm
- 16 Turn of the alarm
- 16 Sleep timer
- 17 Menu options
- 17 Adjusting the display backlight
- 17 Language display
- 18 Factory reset
- 18 Software version
- 19 Technical information
- 20 Simple solutions
- 21 General information
- 21 Care and maintenance
- 22 Guarantee