Instruction Manual


Add to my manuals
24 Pages

advertisement

Instruction Manual | Manualzz

Setting the alarm

Note: Check that the radio has the correct time and date before you set an alarm�

In DAB or FM mode:

1� Press and release the ‘Alarm’ button on the front of the radio, ‘Alarm 1 Setup’ is displayed� Press the rotary control to ‘Select’�

Note: Press and release the ‘Alarm’ button twice to enter the Alarm 2 setup�

2� ‘Alarm 1 Wizard’ is displayed and the hour digits for the alarm will lash�

3� Use the right hand rotary control to scroll to the hour for the alarm� Press the rotary control to ‘Select’�

4� Use the right hand rotary control to scroll to the minutes for the alarm� Press the rotary control to ‘Select’�

5� Use the right hand rotary control to scroll to the duration for the alarm� You can choose from 15, 30, 45, 60 and 90 minutes� Press the rotary control to ‘Select’�

6� Use the right hand rotary control to scroll to the sound source for the alarm� You can choose from Buzzer, DAB or FM� Press the rotary control to ‘Select’�

Note: If you choose DAB or FM as the sound source, you are prompted to select the station you Last Listened to or one of your preset radio stations� Use the right hand rotary control to scroll through the available options and press to ‘Select’�

7� Use the right hand rotary control to scroll to the frequency for the alarm� You can choose from Daily, Once, Weekends or Weekdays� Press the rotary control to

‘Select’�

8� ‘Alarm 1 Wizard’ is displayed again, together with ‘Alarm Of (or On)’� Use the right hand rotary control to choose ‘Alarm On’ or ‘Of’ and press the rotary control to

‘Select’� ‘Alarm Saved’ is displayed�

Note: Remember to set the alarm radio volume, using the left hand rotary control, to one that will wake you� The alarm volume will increase progressively until it reaches the alarm volume you have set�

9� In Standby mode a bell symbol in the top right of the display will conirm when an alarm has been set�

Note: If the time is not set or has failed to update from the radio signal, ‘Time is not set’ will be displayed when you try to set the alarm� The radio will then prompt you to set the time� An alarm can only be set after the time has been set�

15

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals