advertisement
TM
and Editing Screen
pressing the Blue Key with certain keys on the Numeric Keypad. Several of the screens are shown or described in the next five pages.
The Disk Recorder display page is always shown when the system is turned on.
Current Time
This field shows the timecode position of the current disk project.
Zoom range
Shows the Zoom number, from 1 to 16, of the horizontal scale. Higher numbers indicate finer display (less time on screen).
Takes Screen
Shows information about the clips (pieces of audio) on the currently selected track. You also see layers of clips that are “underneath” and cannot be heard.
This screen is automatically displayed whenever you enter an editing Menu. You can also force its display by typing <Blue>k.
4T Screen
Shows four tracks. You can select this screen by typing <Blue - 4>.
The features of this screen are identical to those of the 24, 16, 12, 8,
2 and 1-track displays. They are selected by typing <Blue-0>, <Blue-
2>, <Blue-1>, <Blue-5>, <Blue-8> and <Blue-7> respectively.
waveforms quickly appear.
Clip Names
Each clip is named as it is recorded, and can be renamed in the Name
Menu. These names scroll as the clip be affected by the next edit command.
Unselected Clip
Clips must be touching the cursor in order to be selected (unless a range is used by the editing mode). In either case, unselected clips are shown in blue, and moves across the screen.
Track Names
Each track can be named in the Name Menu.
These names are fixed in position on the screen.
User Manual Page
13
TM
6.
The Device
Explanation of Terms
Name of the current open project, if any
(see Starting a Project)
Each storage device has a number from 1 to
6 (plus a backup device which may be number 7)
You can name each device when initialising it if you wish (see Preparing Disk Drives for
Work).
Manufacturer of disk drive
Total size in Megabytes (each megabyte is approximately 10 seconds of mono audio at 44.1
kHz).
Unused disk space in Megabytes
Unused disk space in minutes and seconds of mono audio at 44.1 kHz
Name of domain, or working group of systems.
Name of network node, which may be a FAME, an MFX system, a server, or another computer.
Unit, or hard disk disk drive, attached to system.
Folder or directory on a disk drive.
4 Gbyte hard drive by Seagate, SCSI address 0
Number of items in current directory view.
SCSI ID and
Logical Unit
Number of current disk.
The timecode frame rate for the project
(see MFX Menu)
Page
14
Projects are named on the Project Menu or renamed on the Name Menu. The .MT
at the end of the name indicates a
“multitrack” file or project. Other file types you may see are .MK files (macro files) .omf files (OMF export files) WAVE files and more.
User Manual
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 7 Getting Started
- 9 The FAME Editing Console
- 10 How the Disk Recorder Works
- 11 FAME Editing Screens
- 13 The FAME Editing Screen
- 15 The Device and File Pages
- 16 The Patch and Meters Display
- 19 Starting a Project
- 19 Folder view
- 19 Navigation
- 19 From and To Keys
- 19 File view
- 20 The Project Menu
- 21 Project Menu 2nd Level
- 22 Project Menu 3rd Level
- 22 Password Protection
- 24 Multi-User File Access
- 25 The Clip
- 25 Time Code Reference
- 25 Overlapping Clips
- 25 The Track
- 25 The Current Track
- 28 Recording
- 28 The Arm Menu
- 28 The Arm Submenu
- 30 The Input Submenu
- 31 Metering Input Levels
- 31 Entering Record
- 31 Using the FAME Record Button
- 31 Timecode Track?
- 31 Playback
- 32 Punch-in Punch-out
- 32 Automatic Drop-in
- 33 The Digi Menu
- 33 House Submenu
- 33 Output Submenu
- 34 Naming
- 34 Use of Ranges
- 34 Keyboard Use
- 34 Automatic Naming
- 35 Solo, Mute, Disable and Safe
- 35 Disabling Tracks
- 35 Track Safe
- 38 Editing
- 38 The Clip
- 38 Master Recording Number
- 38 Sync Point
- 38 Timecode Reference
- 39 Level
- 39 Project Layer
- 39 Summary of Editing Commands
- 39 Selecting Clips for Editing
- 39 Editing Stereo Clips
- 39 Stereo Swap
- 40 Timecode Ranges
- 40 Setting up a Range
- 40 Simple Method
- 40 Using Range Menus
- 41 Range Persistence
- 41 Optional Ranges
- 41 Automatic and Manual Ranges
- 42 The Edit Menu (Cut & Paste)
- 42 Selecting Audio
- 42 Cutting or Copying to the Clipboard
- 42 Selecting Destination Tracks
- 42 Other Paste Commands
- 42 Pasting From the Clipboard
- 43 The Edit Menu
- 43 The Cut Submenu
- 44 The Copy Submenu
- 45 Edit Commands with a Range
- 45 The Cut Submenu
- 46 The Copy Submenu
- 46 The Fill Command
- 47 The Grab Menu
- 47 Slip Submenu
- 47 Slip Clip vs Cut & Paste
- 48 Trim Submenu
- 48 Super Trim
- 48 Restore Trimmed Audio
- 48 SLIP / TRIM Toggle
- 49 Grab Menu Illustrated
- 50 The Nudge Menu
- 50 Range
- 53 Block Editing
- 53 The Dubber SubMenu
- 54 The Dubber Menu Illustrated
- 54 Original Track Layout
- 54 Erase
- 55 The Razor SubMenu
- 56 The Razor Submenu Illustrated
- 56 Original Track Layout
- 56 Splice
- 56 Duplicate
- 56 Delete
- 57 The Track Menu
- 58 The Track Menu Illustrated
- 58 Original Track Layout
- 58 Numbers
- 58 Shadow
- 59 Fades
- 59 The Fade Menu
- 60 Fades With a Range
- 61 More About Fades
- 61 Crossfades and Channels
- 61 Fade Defaults
- 62 The Level Menu
- 62 Range
- 62 Track Selection
- 62 Mode Selection
- 63 The Gate Menu
- 63 Gating During Recording
- 63 Gating After Recording
- 64 Gate Menu Illlustrated
- 65 Equalisation
- 65 The EQ Menu
- 65 Making Parameter Selections
- 65 Parameter Display
- 65 EQ In/Out
- 65 Changing EQ Settings
- 66 Notes
- 66 Copying EQ Settings
- 67 Time Compression and Expansion
- 67 The Wave Menu
- 67 The Stretch Submenu
- 68 Stretching into a Range
- 68 Algorithms
- 69 The Pitch Submenu
- 69 Using the Pitch Submenu with a Range
- 70 The Varispeed Menu
- 70 Varispeed with Time Measurement
- 71 Using a Range
- 72 Varispeed with Pitch Measurement
- 72 Using a Range
- 73 The Takes Menu
- 73 Notes on Layering of Clips
- 74 The Import Menu
- 75 More About Importing
- 76 Building a Sound Library
- 80 AudioBase
- 80 AudioBase Glossary
- 80 Field Summary
- 81 User Fields
- 81 The AudioBase Screen
- 81 The AudioBase Form
- 81 The Record List
- 82 The AudioBase Menu
- 82 More About Paste
- 82 More About Audition
- 83 The Search Submenu
- 83 The Search Options Submenu
- 84 How to Search for Clip Records
- 84 Entering Data into Fields
- 84 Cycling through Values
- 84 Capturing Current Values
- 84 Using Wildcards in Searches
- 85 Use of Operators
- 85 Searching the Current Project
- 86 The Edit Submenu
- 86 Entering Data Into Fields
- 86 Writing into Multiple Records
- 86 Scrolling While Editing
- 87 The File Submenu
- 87 Republishing a Project
- 88 Publishing with a Text File
- 88 The Text File Format
- 88 How AudioBase Recognises Text
- 88 The File
- 88 Clips
- 89 Commands Using Text Files
- 89 Publish a Text File
- 89 Export
- 89 Import
- 89 Strategies for Using Text Files
- 90 Editing the Form
- 91 Guide to AudioBase
- 91 Found X of Y
- 91 Alphabetic Sort
- 91 No Export
- 91 The Line Field
- 94 Undoing Edits
- 94 Undo Togggling
- 94 The Undo Menu
- 95 Managing Disk Space
- 95 Throwing Out Rubbish
- 95 Range
- 95 The Space Menu
- 97 Recovering Lost Clips
- 97 The W Display
- 97 The Recover Waveform Command
- 97 The Waveform Show Command
- 100 Marking Attached Files
- 101 Backup Progress Display
- 101 Backup Verification
- 103 More About File Management
- 103 Warning on Overwrite
- 103 The Backup Display
- 104 The Export Menu
- 105 Rules for writing to CD
- 106 The Print Menu
- 107 Setting Printer Characteristics
- 107 Printer Compression
- 107 Printer Head Density
- 107 Pixel Density (X-Axis)
- 107 Pixel Density (Y-Axis)
- 107 Clip Attraction in Frames
- 107 Timecode Format
- 108 Printer Characteristics