Fortinet FortiADC D-Series Handbook

Download SNMP MIBs Chapter 12: System Management l l

In the FortiADC interface settings, you must enable SNMP access on the network interface through which the

SNMP manager connects.

You must have Read-Write permission for System settings.

To configure SNMP system information:

1. Go to System > SNMP.

2. Click the System Information tab.

3. Complete the configuration as described in

Table 103 .

4. Save the configuration.

 Table 103: SNMP settings

Settings Guidelines

SNMP Agent Enable to activate the SNMP agent, so that the system can send traps and receive queries.

Description

Contact

Location

A description or comment about the system, such as dont-reboot. The description can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( - ) and underscores ( _ ).

Contact information for the administrator or other person responsible for this system, such as a phone number (555-5555) or name (jdoe). The contact information can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( - ) and underscores ( _

 ).

Physical location of the appliance, such as floor2. The location can be up to 35 characters long, and can contain only letters (a-z, A-Z), numbers, hyphens ( - ) and underscores ( _ ).

Download SNMP MIBs

FortiADC allows you to download full FortiADC and Fortinet Core MIB files, which provides more options for server load balance, global serer load balance, link load balance, and firewall with SNMP traps.

To download an SNMP MIB file:

1. Click System > SNMP.

2. Click the System Information tab.

3. In the FortiADC SNMP MIB section, click Download FortiADC MIB File or Download Fortinet Core

MIB File.

4. Follow the instructions onscreen to complete the download.

FortiADC D-Series Handbook

Fortinet Technologies, Inc.

277