Fortinet FortiADC D-Series Handbook

Chapter 13: Logging and Reporting Enabling real-time statistics

3. Complete the configuration as described in

Table 137 .

4. Save the configuration.

 Table 137: High speed logging configuration

Settings Guidelines

Status Select to enable the configuration.

Address IP address of the syslog server.

UDP Port Listening port number of the syslog server. Usually this is UDP port 514.

Traffic Select to enable logging for traffic processed by the load balancing modules.

Traffic Category The following options become available only when the Traffic check-box is selected. See above.

l

SLB—Send Server Load Balancing logs.

l

GLB—Send Global Load Balancing logs.

Script

Script Category

Enable/disable script.

Enable/disable server load balance log scripting.

Enabling real-time statistics

The fast statistics feature enables real-time statistics collection for fast reports. Enabled by default. You can disable fast statistics if you encounter issues.

Before you begin: l

You must have Read-Write permission for Log & Report settings.

To enable/disable real-time statistics:

1. Go to Log & Report > Log Setting.

2. Click the Fast Stats tab.

3. Complete the configuration as described in

Table 138 .

4. Save the configuration.

 Table 138: Fast Statistics configuration

Settings Guidelines

Status Enable/disable fast statistics. Enabled by default.

Traffic

Traffic Category

Enable/disable fast statistics for traffic logs. Enabled by default.

Enable/disable fast statistics for traffic categories. SLB is enabled by default.

326 FortiADC D-Series Handbook

Fortinet Technologies, Inc.