Index. Cisco Visual Quality Experience Application , Videoscape Distribution Suite for Television, 3.7

I N D E X

Symbols

/etc configuration files description

7-2

managing with VQE CMS

7-2

A access link bandwidth for each VQE-C

A-9

access routes

2-13

address and port-dependent mapping (with NAT)

1-10

alarms B-4

anycast addresses

2-19, 3-8, 3-10

Apache Tomcat application server

1-8, 2-31, 2-32, D-22, D-39

Application Monitoring Tool (AMT)

See VQE-S Application Monitoring Tool (AMT)

-apply option to vqe_cfgtool

7-18

Area ID parameter

2-29

Area Type parameter

2-29

average stream rate

4-11

B

-backup option to vqe_cfgtool 7-19

bandwidth conserving with RCC

A-6, A-7, A-8

excess fraction

A-9, A-10

maximum receive for a VQE-C

A-11

on the access link for each VQE-C

A-9

per VQE Client policing

A-5

reserved for Unicast Retransmission

A-5

reserving for incoming unicast traffic

A-9

binding requests to STUN Server

1-10

78-xxxxx-xx

BIOS settings on CDE110 server

G-1, J-1

Bit Rate field

3-10

Bond interfaces configuring

A-15, A-16, D-5

description

2-12

boot sequence on CDE110 server

G-1, J-1

C

cable connections 2-4, D-31

cache time

A-6

capacity statistics

4-23

CD/DVD drive

G-1

centralized logging 2-28, D-22, D-39

certificate authority (CA) certificates deploying commercial certificates

2-10

generating

2-6

installing

2-9

Certificate Signing Request (CSR) generating

2-7

Certificate-Signing Request (CSR) signing

2-8

channel change time

1-5

Channel Lineups window

4-7

channel-provisioning servers 2-27, D-21

channels associating with servers

1-15

cloning with VCPT

3-13

configuration database in VQE-S

1-9

configuring

3-9

copying associations with a server

3-19

defining server associations

3-19

defining with VCPT

1-15, 3-10

Book Title

IN-1

Index deleting with VCPT

3-13

enabling Rapid Channel Change

3-10

error-repair options

3-11

lineups 1-7, 1-15, 1-22

Member Receiver Population

4-7

modifying configuration

C-3

multicast streams

3-10, 4-11

provisioning with VCPT

1-7, 1-16

rules for adding

3-11

viewing configuration with VQE-S AMT

4-8

viewing details with VCPT

3-12

viewing details with VQE-S AMT

1-21

viewing statistics with VQE-S AMT

4-10, 5-7

check_daemons script

2-31, 2-32, D-23, D-40

Cisco CDA Visual Quality Experience Application

See Cisco VQE

Cisco CDE

1-4, 1-7, 1-9

Cisco CDE110

1-26

bandwidth limits

H-1

configuring MIBs

D-20, D-22, D-37, D-39

initial configuring for VQE-S 2-23, D-2

initial configuring for VQE Tools

2-23, D-30

restarting

D-28, D-44

terminal emulation software

2-3

viewing hardware information

4-6, 5-4

Cisco CDE111 bandwidth limits

H-1

Cisco CDE250

1-27

bandwidth limits

H-1

Cisco Digital Content Manager (DCM)

1-3, 1-7, 1-12

Cisco end-to-end IPTV solution model

1-14

Cisco set-top boxes

1-4, 1-12, 1-14

CISCO-SYSLOG-MIB

See SNMP

Cisco technical support

6-30

Cisco VQE benefits

1-8

deployment options

1-14

deployment requirements

1-14

Book Title

IN-2

Hybrid Error Repair

1-4

major components 1-3

overview

1-2

reference architecture model

1-14

software components

1-4

software installation and upgrade

2-1

Cisco VQE Client (VQE-C)

See VQE Client (VQE-C)

Cisco VQE Server (VQE-S)

See VQE Server (VQE-S)

CISCO-VQES-MIB

B-5

See SNMP

client database file

1-19, 1-20, F-1, F-2

cloning channels

3-13

commands

su and sudo 2-4

vcds_send_file

F-1

vqe_cfgtool 7-18

vqereport

6-29

-config option to vqe_cfgtool

7-19

configuration delivery infrastructure (CDI)

E-1, E-2, F-1

Configuration Engine (CE)

7-1

configuration files managing with VQE CMS

7-2

Configuration Management System

See VQE Configuration Management System (VQE

CMS) configuration parameters (VCDB) description

A-1

network parameters A-15

OSPF parameters

A-18

Rapid Channel Change parameters A-6, A-9

RTCP Exporter parameters

A-12

system parameters

A-12

Unicast Retransmission parameters

A-5, A-9

VQE-S global parameters

A-2

See also VCDB parameters

Configuration Tool (CT) description

7-1, 7-3

78-xxxxx-xx

information on parameters

7-5

parsing errors

7-3

Root Menu

7-4

using

7-4, 7-5

vqe_cfgtool command

7-18

configuring VQE-S and VQE Tools servers

2-1

manually

D-1

Control Plane process monitoring by Process Monitor

1-10

monitoring with Linux commands

2-40, D-28

monitoring with VQE-S AMT

4-5

CPE (customer premises equipment)

1-3, 1-4

VQE-C integration

1-14

VQE-C interface to VQE-S

1-11

D

Data Plane process monitoring by Process Monitor

1-10

monitoring with Linux commands

2-40, D-28

monitoring with VQE-S AMT

4-5

date and time changing with Network Time Protocol

6-9, 6-31

changing with the date command

6-10

dead interval (OSPF)

A-20

Dead Interval parameter

2-29

debugging configuring options

4-33 messages written to vqe.log file 4-33, 5-9

options in VQE-S AMT

1-22

dedicated interfaces

2-15, D-15

defining a channel

3-8

defining channel associations with VCPT

3-19

delay of IPTV packets

1-2, 1-13, 1-23

Delete button in VCPT

3-4

deleting channels

3-13

Differentiated Services Code Point (DSCP) configuring for RCC

A-8

configuring for RTCP packets

A-4

78-xxxxx-xx

Index configuring for STUN Server binding requests

A-4

configuring for Unicast Retransmission A-6

description

1-10

viewing configuration

4-17

Digital Content Manager (DCM) 1-3, 1-5, 1-7, 1-14

directories for VCPT

6-4

for VQE-S

6-4

Domain Name System (DNS) servers

1-17, 2-24, A-12, E-1

DSL

Cisco VQE for

1-2

noise issues

1-8

Dynamic Host Configuration Protocol (DHCP) servers

E-1

dynamic routing feature

2-14

E

Enable MD5 parameter

2-29

Entitlement Control Messages (ECM)

1-6

Equal Cost Multipath (ECMP) routes

2-19, 2-27, A-17, D-9

error messages

C-4

error repair

average rate 4-12, 4-19

configuring

3-11

options

3-8, 3-11

See also FEC

See also Unicast Retransmission

Ethernet ports

CDE110

1-26, 1-27

configuring

2-25, A-15

Layer 3 connection

2-4

MIB

B-4

numbering

D-3, D-31

excess bandwidth fraction

A-9, A-10

configuring

A-9, A-10

maximum

A-11 minimum A-11

viewing configuration

4-16

Book Title

IN-3

Index viewing distributions

4-21

Export button in VCPT

3-4

exporting RTP statistics

1-13, 1-23

F facility codes

C-1

failover protection

2-19

Fast Decoder Buffer Fill (FDBF) 1-7, A-6

FEC configuring

3-11

description

1-2, 1-12

Hybrid Error Repair

1-4

one and two dimensions

1-12

stream generator

1-3

VQE-C implementation

1-12

feedback target addresses anycast addresses

2-19, 3-8, 3-10

static routes on attached router

2-50

Feedback Target IP field

3-10, 3-11

feedback target routes

2-13

filenames

VCPT configuration files

3-4

VQE-S and VCPT

6-3

files for VCPT

3-3, 6-4

for VQE-S

6-4

replacing a lost file

6-5

-fix_checksum -option to vqe_cfgtool

7-19

-fix_config option to vqe_cfgtool

7-19

Force Update button

3-6

forward error correction

See FEC

G

group attribute file

1-19, 1-20, F-1, F-2

IN-4

Book Title

H hello interval (OSPF)

A-19

Hello Interval parameter

2-29

hostname configuring

2-24, D-4, D-33

parameter

A-12

HOST-RESOURCE-MIB

B-4

httpd service automatic start

2-31, 2-32

error log

4-6, 5-4

log files

6-11, 6-15

restarting

6-11, 6-14

verifying status

D-22, D-39

HTTPS clients (trusted) configuring on a VQE-S

2-27, D-21

configuring on a VQE Tools server

D-38

Hybrid Error Repair

Cisco VQE benefit

1-8

configuring

3-11

description

1-4

See also error repair

HyperText Transfer Protocol daemon

2-31, 2-32, D-22, D-39

I

If

A-3

ifconfig command D-6, D-33

IF-MIB

B-4

I-frames

1-6

IGMP channel change delay

1-2

fast leave in access node

A-7

join variability

A-6

latency data

4-6

VQE-S and multicast groups

1-9

Import button in VCPT

3-4

ingest of multicast streams

2-15, 2-29, 2-30, A-3, D-16

initial configuration tasks

2-1

78-xxxxx-xx

Index with manual configuration

D-1

Input Bandwidth Table

4-27

installing software 2-1

INTEL-SERVER-BASEBOARD5 MIB

B-4

Interface parameters reference information

A-15

interfaces configuring

2-25, 2-26, A-3, D-4, D-5, D-15, D-18, D-32

configuring with Configuration Tool 7-6

configuring with VCDB parameters A-3, A-4

dedicated

2-15, D-15

for VQE-S ingest and services traffic 2-30, A-3, D-17

for VQE-S ingest traffic

2-30, A-3, D-16, D-17

for VQE-S services traffic

2-30, A-4, D-16, D-17

shared

2-15, D-15

Interface Summary Table

4-26

ip link show command

D-6, D-33

IPTV existing and new deployments

1-14

packet loss

1-2, 1-23

packets

1-7

statistics

1-9

subscribers 1-2

video services

1-2

IPTV Packet Loss Monitoring description

1-2

with VQE-S RTCP Exporter

1-23

IPTV Services Delivery Server (ISDS) cannot send channel information

6-13

J jitter

1-2, 1-13, 1-23

L

LACP bonding for VQE-S

2-20

Linux operating system

1-4, 1-8, 1-9, 1-26, 1-27

78-xxxxx-xx initial configuration

D-3, D-31

MIBs

D-20, D-37

load balancing of VQE-S services

1-9

on VQE-Ss 2-19

log files (VQE-related)

4-6, 5-4, 6-2

logging configuring levels

4-33, 5-7, A-2

levels

A-2

messages written to vqe.log file

4-33, 5-7, A-2

viewing log files

4-6, 5-4

look-aside mode

1-8

Loss RLE report block type

1-23, 4-8

lost files

6-5

M management networks configuring for VQE-S hosts

2-13, D-6

configuring for VQE Tools hosts

2-13, D-34

configuring with VQE Configuration Tool

2-26

maximum receive bandwidth (MRB)

A-9, A-11

MD5 authentication VCDB parameters A-19

MD5 Key ID parameter

2-29

MD5 Key parameter

2-29

Member Receiver Population 1-22, 4-7

messages

See system messages

Microsoft Internet Explorer

2-2

Mozilla Firefox

2-2

MPEG Parser

1-9

Multicast Group Table

4-28

multicast IP addresses

3-10

Multicast IP field

3-10

multicast IPTV

1-2

multicast latency

1-6

Multicast Load Balancer process description

4-27

monitoring

4-5, 4-26

Book Title

IN-5

Index

Process Monitor role

1-10

verifying it is running

2-40, D-28

viewing statistics

1-21

multicast streams

average rate 4-11

for channels

1-9, 1-26, 1-27, 3-10

monitoring

6-8

multiple definitions of VCDB parameters

7-15

N

NACK messages

NAT statistics

1-22, 4-11, 4-18

See Network Address Translation

Net-SNMP

B-3, D-20, D-37

Network Address Translation (NAT) description

1-10

STUN Server

A-4, D-20

network configuration file

1-18

network information 4-6, 5-4

network parameters configuring

7-4

Network Time Protocol (NTP) configuring

2-25, D-19, D-36

daemon

2-31

parameter

A-12

with SSL certificates

2-8

New Config button

3-4

ntpd service 2-31

configuring and starting

D-22, D-40

started automatically

2-32

verifying it is running

2-40, 2-42

O

Open Configuration button

3-4

open-source software

1-14

IN-6

Book Title

OpenSSL Project 2-5

original stream for a channel 3-10

OSPF

configuring for VQE-S traffic D-10

configuring system services

D-23

initial configuration parameters

2-28

on router attached to VQE-S host

2-48

on VQE-S host

2-14

routing type VCDB parameter A-18

status in VQE-S AMT

4-6

VCDB parameters

A-18

verifying edge router configuration

D-13

verifying system services

D-25

verifying VQE-S configuration D-11

VQE-S host in area 0

2-49

VQE-S host in separate area

2-48

ospfd service

2-32, D-23

P packet loss

1-2, 1-13, 1-23

packets for IPTV

1-7

lost

4-11

received

4-11

repair

4-11

repair statistics

4-18

RTCP

4-12

parameters

See VCDB parameters

passwords

for root user 2-24

for vqe user

2-4, 2-24

requirements

2-24

per-client network configuration

1-18

permissions for files and directories changing

6-5

for VCPT

6-4 for VQE-S 6-4

78-xxxxx-xx

Index policing

A-5

port usage on VQE-S

3-11

Process Monitor process

1-10, 2-40, D-28

Program Association Tables (PAT)

1-6

Program Clock Reference (PCR)

1-6

Program Map Tables (PMT)

1-6

Q

Quagga processes

2-32, D-23

routing package

2-15

R random access points (RAPs)

1-6, 4-17

Rapid Channel Change (RCC)

1-2, 1-4

conserving bandwidth A-6, A-8

e-factor histograms

4-14, 4-15, 4-21, 4-22

enabling with VCPT

3-10

monitoring statistics

1-22, 4-18, 4-23

parameters A-6

viewing configuration

4-8, 4-16

viewing statistics

4-12

VQE-S role

1-9

Re-Activate button in VQE-S 4-7

Real Time Streaming Protocol (RTSP) 1-17

Real-Time Transport Protocol (RTP)

1-2, 1-3, 1-7, 1-14

repair packet statistics

4-18

rebooting

VQE-S

C-3, D-28

VQE Tools server D-44

recovery procedures

C-3

Red Hat Enterprise Linux 5.1 operating system

1-26, 1-27,

D-3

redundancy for VQE-S

1-10, 2-19, 3-8

repair packets 4-11

reset counters

4-31

Resetting the root password

6-31

78-xxxxx-xx resiliency of VQE-S

1-10

restarting

VCDS

6-31

VQE-S

6-30

VQE-S channels

C-3

restore counters

4-32

-restore option to vqe_cfgtool

7-19

RMON MIB B-4

root user

2-4, 2-24, 2-32

router attached to VQE-S host

OSPF routing guidance

2-48

static routes for feedback targets

2-50, 3-8

Router ID parameter

2-29

router ID VCDB parameter

A-18

routing configuration for shared interfaces

2-16

overview

2-12

See also OSPF

routing types with VQE-S

2-28

RTCP Exporter

See VQE-S RTCP Exporter

RTCP Port field

3-10, 3-11

RTCP Reports description

1-23

viewing configuration

4-8

RTP Control Protocol (RTCP) compound packets

1-23

description

1-7, 1-15

enabling and disabling 3-10

industry standards

1-2

packet statistics

4-12

sender and receiver reports

1-13

RTP inactivity timeout

A-4

RTP Port field

3-10, 3-11

RTSP DESCRIBE

E-2

S

-sanity_check option to vqe_cfgtool

7-20

Book Title

IN-7

Index

Scientific-Atlanta IPTV Layer (SAIL) 1.x and 2.x

1-4

screen resolution requirements

2-2

SDP files created by VCPT

3-3

Secure Shell (SSH)

2-4

Secure Shell daemon

2-31, 2-32, D-22, D-39

Secure Sockets Layer (SSL) certificates

See SSL certificates

D-3

security restrictions

2-4

selective retransmission

See Unicast Retransmission

Send button

3-5

sending channel information

3-5

serial ports

1-26, 1-27

server.crt file 2-9, 2-10

server.key file

2-9, 2-11

servers adding

3-16

defining with VCPT

3-14

deleting with VCPT

3-18

viewing server information

3-17

services configuring and starting

D-23, D-43

started automatically

2-31

traffic for VQE-S

2-15

VQE-S

1-10, 2-31, 6-30

Session Description Protocol (SDP) 1-7

set-top boxes

1-4, 1-7, 1-12, 1-14

severity levels

C-2

shared interfaces

2-15, D-15

SMPTE 2022 standard stream orderings

1-13

VQE-C extensions

1-13

SNMP agent

B-2

AgentX

B-3

CISCO-SYSLOG-CAPABILITY B-5

CISCO-SYSLOG-MIB

B-5

CISCO-VQES-MIB

B-5

CISCO-VQE-TOOLS-MIB

B-5, B-8

Book Title

IN-8 columnar objects

B-1

community strings

2-28

configuring

2-28, D-20, D-37

events

1-27, 1-28

Intel subagent

B-3

management hosts 2-28, A-13

MIB

1-12, B-1

object identifier

B-2

parameters

A-13

protocol-related counters

B-4

scalar objects

B-1

snmp manager

B-1

SNMP subagent

B-3, D-22

snmp subagent

B-1

SNMPv2

B-2

trap

2-28, B-2

viewing SNMP configuration

4-6, 5-4

snmpd service

2-31, 2-32, D-22, D-39

SNMP-NOTIFICATION-MIB

B-4

snmpsa service

2-31, 2-32, D-22, D-39

SNMP subagent

D-39

SNMP subagent daemon 2-31, 2-32

SNMPv2-MIB MIB

B-4

software components of Cisco VQE 1-4

software development kit (SDK) for VQE-C

1-13

software installation and upgrade

2-1

Source IP field

3-10, 3-11

SSH certificates

3-19

sshd service

2-31, 2-32, D-22, D-39

SSL certificates deploying commercial

2-10

deploying your own

2-7

error log

4-6, 5-4

setting up

2-5, D-3, D-31

VQE Configuration Tool

2-27

stackedChain.pem file

2-9, 2-10, 2-11

starting

VCDS

6-31, D-43

VQE-S

6-30, D-27

78-xxxxx-xx

Index static routes configuring for VQE-S traffic

D-8

for a distribution network

D-7

for a management network

D-6, D-34

for feedback targets

2-48, 3-8

limitations

2-14

on VQE-S

2-14

statistics

channels 4-10, 5-7

Error Repair

4-16, 4-18, 4-23

packet-loss monitoring

1-21

RTCP Exporter

4-29

Status of Last Send messages

3-15

Status of Last Send Time 3-16

status of VQE-S processes

1-7

stopping

VCDS

6-31

VQE-S

6-30

Store As button

3-4

Store button

3-4

stream generators for FEC

1-3, 1-12

STUN Client 1-10

STUN Server

1-10

configuration

1-11

enabling

A-4, D-20

monitoring

4-5

su or sudo commands

2-4

symmetric NAT

1-10

syslog_snmpsa service

2-31, 2-32, D-39

syslog messages

See system messages

C-1

syslog snmp service

D-22

system.iptables.trusted_provisioner parameter

A-14, D-38

system console

2-5

system information system status

4-6, 5-4

system messages description

C-1

no channel configuration

D-27

78-xxxxx-xx online file with reference information

C-4

setting logging level

4-33

severity

C-2

structure

C-1

viewing system log

4-6, 5-4

VQE-S logging

6-2

written to vqe.log

4-33, 5-7, 6-2

system parameters configuring

7-4

reference information

A-12

See also VCDB parameters

system services

on VQE-S host 2-31, D-23

on VQE Tools host

2-32, D-40

system time changing with Network Time protocol

6-9, 6-31

changing with the date command

6-10

T

Telco Alarm Management

1-27, 1-28

terminal emulation software

2-3

terminal servers

2-5

time zones

2-25, A-13, D-19, D-36

tomcat5 service automatic start

2-31, 2-32

log files 6-11, 6-15

restarting

6-11, 6-14

verifying status

D-22, D-39

Tomcat log

4-6, 5-4

TR-135 statistics

1-12

TRAP listeners

B-4

troubleshooting

channels not displayed in VQE-S AMT 6-11

internal server error in VCPT

6-15

multicast streams

6-8

no graphs in VQE-S AMT

6-12

repeated messages on Cisco CDE110

6-9

VCPT cannot send channel information

6-13, 6-15

Book Title

IN-9

Index

VCPT unavailable

6-10

VQE-S, VQE-S AMT, and VCPT

6-7

VQE-S AMT unavailable

6-10

trustedca file

2-10, 2-11

trusted provisioning clients

2-27, 6-13, A-14

trusted provisioning servers

2-27, 6-13, A-14

U unicast reservation

A-9

Unicast Retransmission bandwidth reserved

A-5

configuring

3-11

description

1-2

Hybrid Error Repair

1-4

monitoring statistics

1-21, 1-22, 4-16

parameters

A-5

per VQE Client policing

A-5

viewing statistics

4-18, 4-23

VQE-C role

1-11

VQE-S AMT

1-7, 4-16

VQE-S role

1-4, 1-9

Unicast Retransmission Stream fields

3-11

upgrading software

2-1

usage statistics for channels

1-22

V vcdb.conf.sample file

7-15

description

7-15

on VQE-S

6-4 on VQE Tools server 6-4

parameter information in

7-16

vcdb.conf.tools.sample file 6-4

VCDB file (vcdb.conf)

RTCP Exporter

2-44

VCDB parameters entering data

7-6

IN-10

Book Title multiple definitions allowed or not allowed

7-15

order of

7-15

reference information

A-1

those not configurable with CT

7-5

VCDB Parser

parsing errors 7-3

VCDS

See VQE Client Configuration Delivery Server

(VCDS) vcds_send_file command

F-1, F-2

vcds_snmpsa service

2-32

VCDS AMT

SeeVQE Client Configuration Delivery Server

(VCDS)

VCDS Application Monitoring Tool (VCDS AMT)

5-1

configuring VCDS debugging

5-9

description

1-7

log files

5-7

logging in

5-2

navigating

5-2

VCDS Configuration Window

1-25

VCDS Status Information

1-24

VCDServer process

D-43

vcds service configuring and starting

D-43

started automatically

2-32

verifying status

D-45

vcds snmp service D-39

VCPT

See VQE Channel Provisioning Tool (VCPT)

verifying host system for VCPT

D-44

for VQE-S D-28

verifying system services

2-39, 2-41, D-23, D-39, D-40

video quality

1-2, 1-8, 1-23

video-quality monitoring (VQM) application 1-23

viewing channel details

3-12

VLAN support for VQE-S 2-22

VQE

78-xxxxx-xx

Index

See Cisco VQE

vqe.log file

4-33, 5-7, 5-9

vqe_cfgtool command

7-18

-config option

7-3

VQE Channel Provisioning Tool

managing files 3-3

VQE Channel Provisioning Tool (VCPT) adding servers

3-16

cloning channels

3-13

configuration filenames

3-4

configuration files

3-3

copying channel associations

3-19

csv I-25

csv format

I-21

defining channel associations

3-18

defining channels

2-19, 3-8, 3-9

defining servers

3-14

deleting channels

3-13

deleting servers

3-18

description

1-7, 1-15

exporting

I-1

export to remote server

1-17

GUI

1-16

importing I-1

initial configuring

2-1, D-1

interactions with VQE Client Configuration Delivery

Server

1-16

interactions with VQE-S

1-16

log files

6-3

logging in

3-2

provisioning channels

3-7

sending channel information

3-7

software

1-26, 1-27

SSL certificates

2-5

Status of Last Send messages

3-15

troubleshooting

6-7

trusted HTTPS clients

D-21

using

3-1

verifying status

D-44

78-xxxxx-xx viewing channel information

3-12

viewing server information

3-17

VQE deployment

1-15

VQE reference architecture model

1-14

xml schema

I-1, I-8

VQE Client (VQE-C)

Cisco end-to-end IPTV solution model

1-14

description

1-4, 1-11

DHCP and DNS servers

E-1

Error Repair

1-11

FEC 1-12

IPTV Packet Loss Monitoring

1-11

maximum receive bandwidth A-11

Network Address Translation (NAT)

1-10

network configuration

1-20

network connectivity

1-15

number receiving a channel

1-22

per-client policing

A-5

policing

A-6

policing for Unicast Retransmission

A-5

Rapid Channel Change

1-7

set-top box integration

1-14

software development kit

1-13

system configuration provisioning server

2-27, D-38

VQE reference architecture model

1-14

VQE Client Configuration Delivery Server (VCDS) defining with VCPT

1-15

description

1-7

DHCP and DNS servers

E-1, F-1

interactions with VQE Client

1-17

log files C-1

role in VQE-C network configuration

1-20

software

1-26, 1-27

starting D-43

starting and stopping

6-31

system messages

C-1

verifying status

D-43, D-45

VQE reference architecture

1-14

VQE Configuration Database (VCDB)

Book Title

IN-11

Index description

7-1

parameters

A-1

used for multiple CDE110 servers 7-3

VQE Configuration Management System (VQE CMS) description

7-2

vqe_cfgtool command

7-18

VQE Configuration Tool configuration items

2-24

See Configuration Tool

VQE-C system configuration provisioning server 1-19,

1-20

VQE-GROUPATTR keyword

F-2

VQE-GROUPMAP keyword

F-2

vqereport command 6-29

vqes_snmpsa service

2-31

VQE-S Application Monitoring Tool (AMT) configuring logging

4-33, 5-7

configuring VQE-S debugging

4-33, 5-9

log files 6-3

logging in

4-2, 5-2

monitoring health of VQE-S processes

4-4, 5-3

monitoring interfaces

4-26

monitoring Multicast Load Balancer

4-26

monitoring VQE-S RTCP Exporter

4-28

navigating

4-4, 5-2

troubleshooting

6-7

using

4-1

viewing channel configuration and status 4-7, 5-4

viewing log files

4-6, 5-4

web application

1-22

VQE-S Application Monitoring Tool (VQE-S AMT) description

1-21

VQE Server (VQE-S) bandwidth reserved for inbound requests

A-9

cable connections

2-4

configuring

2-1, D-2

configuring static routes

D-5, D-8

configuring VCDB parameters

7-4

counters restarted

1-22

Book Title

IN-12 current status

4-5

debugging levels

1-21

defining with VCPT

1-15

description

1-4, 1-7, 1-9

Equal Cost Multipath (ECMP) routes

2-27, A-17, D-8

global parameters

A-2

ingest and services traffic

A-3, D-17

ingest traffic

2-15, 2-29, A-3, D-17

initial configuring

2-1, D-1

log files

6-2

logging levels

1-21

monitoring health of processes

1-21

network connectivity 1-15

per-client policing A-5

policers

1-9

processes

1-10, 2-40, 4-5, D-28

Rapid Channel Change 1-9

redundancy 1-10, 2-19

resiliency

1-10

routing overview

2-13, 2-14

service (vqes) 1-10, 2-31, 6-30

services traffic

2-15, 2-30, A-4, D-16

software 1-26, 1-27

software version

4-5, 5-4

starting

D-27

starting and stopping 6-30

static routes D-10

STUN Server

A-4, D-20

system messages

C-1

system up time 4-5, 5-3

trusted channel-provisioning servers 2-27, D-21

Unicast Retransmission

1-9

verifying status

D-28

viewing log file

4-6

VQE-S RTCP Exporter configuring and enabling

2-43, A-12

description

1-23

IPTV Packet Loss Monitoring

1-2

monitoring with VQE-S AMT

4-28

78-xxxxx-xx

Index

RTCP packet statistics

1-21, 4-29, 4-31

vqe-s snmpsa service

D-22

VQE Startup Configuration Utility pre-configuration worksheets

2-32

Root Menu choices

2-36, 2-37

routing configuration

2-12

VQE Tools server configuring

2-1, D-30

verifying status

2-41

vqe user ID

2-4, 2-24, 2-32, 2-34, 2-41, 2-42, D-4, D-32

vqm_host parameter

A-12

vqm_port parameter

A-12

VQM Host information

4-29

VQM TCP Port information

4-29

W watchquagga process

2-32, D-23

web browser requirements

2-2

wheel group 2-4

X xDSL

1-2

XML schema and examples

for client database file 1-20, F-1 for group attribute file 1-20, F-1

Z zebra service

2-32, D-23

78-xxxxx-xx

Book Title

IN-13

Index

IN-14

Book Title

78-xxxxx-xx