FCC-CLASS A DECLARATION
Manufacturer’s Declaration and Approval
This de vi ce ful fills the re qui re ments of the EEC di rec ti ves
89/336/EEC “Elec tro mag ne tic Com pa ti bi li ty” and 73/23/EEC
“Low Vol ta ge Di rec ti ve”.
Therefore, you will find the CE mark on the back of the device or packaging.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Le présent appareil numérique n’ émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la “Classe A” prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada.
Wincor Nixdorf International GmbH (WN) accepts no responsibility for radio and television reception interference resulting from unauthorized modifications to the equipment. Furthermore, neither cables nor devices which have not been approved for use by WN may be connected. The user shall be held responsible for interference caused in this manner.
Device repairs must be carried out by authorized personnel. All guarantee and liability claims are automatically excluded if repairs have been carried out by unauthorized personnel.
1
