Step 2: Setting the Clock. Sony ICD-55

Step 2: Setting the

Clock

Clock setting display appears when you insert battery for the first time, or when you insert battery after the unit has been without battery for a certain period of time. In this case, proceed from step 2.

See the illustrations on pages 10 and 11 in the Japanese instruction manual.

1

Display the clock setting display.

1 Press MENU to enter the menu mode.

2 Press –=once to display

“SET DATE”.

3 Press (pPLAY/STOP.

The year digits will flash.

4 Press (pPLAY/STOP at the time signal.

The display will return to

“SET DATE”.

4

Press MENU to exit from the menu mode.

2

Set the date.

1 Press –= or ++ to select the digits of the year.

2 Press (pPLAY/STOP.

The month digits will flash.

3 Set the month and day in sequence, then press

(pPLAY/STOP.

The hour digits will flash.

3

Set the time.

1 Press –= or ++ to select the digits of the hour.

2 Press (pPLAY/STOP.

The minute digits will flash.

3 Set the minute.

5