OPTIONS. AEG F55040VI0

24 www.aeg.com

5)

This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal

6) soil.

Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance.

Do not use detergent with this programme.

Information for test institutes

For all the necessary information for test performance. send an email to: [email protected]

Write down the product number (PNC) that is on the rating plate.

5.

OPTIONS

5.1

Multitab option

Activate this option only when you use the combi detergent tablets.

This option deactivates the flow of rinse aid and salt. The related indicators are off.

The programme duration can increase.

Activating the multitab function

Activate or deactivate the multitab function before the start of a programme. You cannot activate or deactivate this function while a programme operates.

1.

Press the on/off button to activate the appliance.

2.

Make sure that the appliance is in setting mode. Refer to ‘SETTING

AND STARTING A PROGRAMME'.

3.

Press and hold function buttons ( D ) and ( E ) at the same time until the multitab indicator comes on.

The function stays on until you deactivate it. Press and hold function buttons ( D ) and ( E ) at the same time until the multitab indicator goes off.

If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps:

1.

Deactivate the multitab function.

2.

Set the water softener to the highest level.

3.

Make sure that the salt container and the rinse aid dispenser are full.

4.

Start the shortest programme with a rinsing phase, without detergent and without dishes.

5.

Adjust the water softener to the water hardness in your area.

6.

Adjust the released quantity of rinse aid.

5.2

Acoustic signals

The acoustic signals operate in these conditions:

• The programme is completed.

• The level of the water softener is adjusted electronically.

• The appliance has a malfunction.

Factory setting: On.

It is possible to deactivate the acoustic signals.

How to deactivate the acoustic signals

1.

Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to

‘Setting and starting a programme’.

2.

Press and hold function buttons ( B ) and ( C ) at the same time until the indicators of function buttons ( A ), ( B ) and ( C ) start to flash.

3.

Press function button ( C ),

• The indicators of function buttons

( A ) and ( B ) go off.

• The indicator of function button ( C ) continues to flash.

• The end indicator comes on.