advertisement
32 www.aeg.com
5.1 Consumption values
Programme
1) Water
(l)
10.5
7 - 14
12.5-14.5
12 - 14
Energy
(kWh)
0.832
0.6 - 1.6
1.4-1.7
0.7 - 0.9
Duration
(min)
232
40 - 170
170-190
82-92
10 0.9
30
9 - 10 1.1 - 1.3
230 - 250
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
5.2 Information for test institutes
For all the necessary information for test performance, send an email to:
6.
SETTINGS
6.1 Programme selection mode and user mode
When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode.
In user mode, the following settings can be changed:
• The level of the water softener according to the water hardness.
• The activation or deactivation of the rinse aid empty notification.
• The level of rinse aid according to the required dosage.
• The activation or the deactivation of
AirDry.
These settings will be saved until you change them again.
How to set the programme selection mode
The appliance is in programme selection mode when the programme indicator [email protected]
Write down the product number (PNC) that is on the rating plate.
is on and the display shows the programme duration.
When you activate the appliance, usually it is in programme selection mode.
However, if this does not happen, you can set the programme selection mode in the following way:
Press and hold simultaneously Delay and
Option until the appliance is in programme selection mode.
6.2 The water softener
The water softener removes minerals from the water supply, which would have a detrimental effect on the washing results and on the appliance.
The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.
The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement
Table of contents
- 9 De programmakeuzemodus instellen
- 10 Het waterontharderniveau instellen
- 11 Het instellen van het glansmiddelniveau
- 11 Het uitschakelen van de melding van een leeg glansmiddeldoseerbakje
- 12 Het deactiveren van AirDry
- 13 Het activeren van XtraDry
- 13 TimeSaver activeren
- 13 ExtraHygiene activeren
- 13 Het zoutreservoir vullen
- 15 De Auto Off-functie
- 15 Een programma starten
- 15 Een programma starten met een uitgestelde start
- 16 De deur openen als het apparaat in werking is
- 16 De uitgestelde start annuleren tijdens het aftellen
- 16 Het programma annuleren
- 16 Einde van het programma
- 32 How to set the programme selection mode
- 33 How to set the water softener level
- 33 How to set the rinse aid level
- 34 How to deactivate the rinse aid empty notification
- 35 How to deactivate AirDry
- 35 How to activate XtraDry
- 36 How to activate TimeSaver
- 36 How to activate ExtraHygiene
- 36 How to fill the salt container
- 38 The Auto Off function
- 38 Starting a programme
- 38 Starting a programme with delay start
- 38 Opening the door while the appliance operates
- 38 Cancelling the delay start while the countdown operates
- 38 Cancelling the programme
- 39 End of the programme
- 54 Comment passer au mode de sélection du programme
- 55 Comment régler le niveau de l'adoucisseur d'eau
- 56 Comment régler le niveau de liquide de rinçage
- 56 Comment désactiver la notification du distributeur de liquide de rinçage vide
- 57 Comment désactiver l'option AirDry
- 58 Comment activer l'option XtraDry
- 58 Comment l'activer TimeSaver
- 58 Comment l'activer ExtraHygiene
- 59 Comment remplir le réservoir de sel régénérant
- 60 Fonction Auto Off
- 61 Départ d'un programme
- 61 Démarrage d'un programme avec départ différé
- 61 Ouverture de la porte alors que l'appareil est en fonctionnement
- 61 Annulation du départ différé au cours du décompte
- 61 Annulation du programme
- 61 Fin du programme