6.3 Measured value indication - Selection of national language. Vega VEGAPULS 65
Add to my manuals
76 Pages
advertisement
6 Set up with the display and adjustment module
– Select menu items in the quick setup menu
– Select editing position
• [+] key:
– Change value of the parameter
• [ESC] key:
– Interrupt input
– Jump to next higher menu
Operating system - Keys direct
The instrument is operated via the four keys of the display and adjustment module. The individual menu items are shown on the LC display. You can find the function of the individual keys in the previous illustration.
Adjustment system - keys via magnetic pen
With the Bluetooth version of the display and adjustment module you can also adjust the instrument with the magnetic pen. The pen operates the four keys of the display and adjustment module right through the closed lid (with inspection window) of the sensor housing.
5
1
Time functions
Measured value indication
28
4
2
3
Fig. 25: Display and adjustment elements - with adjustment via magnetic pen
1 LC display
2 Magnetic pen
3 Adjustment keys
4 Bluetooth symbol
5 Lid with inspection window
When the [+] and [->] keys are pressed quickly, the edited value, or the cursor, changes one value or position at a time. If the key is pressed longer than 1 s, the value or position changes continuously.
When the [OK] and [ESC] keys are pressed simultaneously for more than 5 s, the display returns to the main menu. The menu language is then switched over to " English ".
Approx. 60 minutes after the last pressing of a key, an automatic reset to measured value indication is triggered. Any values not confirmed with [OK] will not be saved.
6.3 Measured value indication - Selection of national language
With the [->] key you move between three different indication modes.
VEGAPULS 65 • Two-wire 4 … 20 mA/HART
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 1 About this document
- 4 1.1 Function
- 4 1.2 Target group
- 4 1.3 Symbols used
- 5 2 For your safety
- 5 2.1 Authorised personnel
- 5 2.2 Appropriate use
- 5 2.3 Warning about incorrect use
- 5 2.4 General safety instructions
- 6 2.5 EU conformity
- 6 2.6 NAMUR recommendations
- 6 2.7 Radio license for Europe
- 7 2.8 Radio license for USA
- 7 2.9 Installation and operation in the USA and Canada
- 7 2.10 Environmental instructions
- 8 3 Product description
- 9 3.2 Principle of operation
- 9 3.3 Packaging, transport and storage
- 10 3.4 Accessories and replacement parts
- 12 4 Mounting
- 12 4.1 General instructions
- 13 4.2 Mounting instructions
- 18 5 Connecting to power supply
- 18 5.1 Preparing the connection
- 19 5.2 Connecting
- 20 5.3 Wiring plan, single chamber housing
- 21 5.4 Wiring plan, double chamber housing
- 23 5.5 Wiring plan, Ex-d-ia double chamber housing
- 24 5.6 Double chamber housing with VEGADIS-Adapter
- 25 5.7 Wiring plan - version IP 66/IP 68, 1 bar
- 25 5.8 Switch-on phase
- 26 6 Set up with the display and adjustment module
- 26 6.1 Insert display and adjustment module
- 27 6.2 Adjustment system
- 28 6.3 Measured value indication - Selection of national language
- 29 6.4 Parameter adjustment
- 47 6.5 Saving the parameterisation data
- 48 7 Setup with PACTware
- 48 7.1 Connect the PC
- 48 7.2 Parameter adjustment
- 50 7.3 Saving the parameterisation data
- 51 8 Set up with other systems
- 51 8.1 DD adjustment programs
- 51 8.2 Field Communicator
- 55 Bit 0 of Byte
- 55 Bit 1 of Byte
- 55 Bit 2 of Byte
- 55 Bit 3 of Byte
- 55 Bit 4 of Byte
- 55 Bit 5 of Byte
- 55 Bit 6 of Byte
- 55 Bit 12 of Byte
- 55 Bit 7 of Byte
- 55 Bit 8 of Byte