advertisement
▼
Scroll to page 2
of 76
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 1 About this document
- 4 1.1 Function
- 4 1.2 Target group
- 4 1.3 Symbols used
- 5 2 For your safety
- 5 2.1 Authorised personnel
- 5 2.2 Appropriate use
- 5 2.3 Warning about incorrect use
- 5 2.4 General safety instructions
- 6 2.5 EU conformity
- 6 2.6 NAMUR recommendations
- 6 2.7 Radio license for Europe
- 7 2.8 Radio license for USA
- 7 2.9 Installation and operation in the USA and Canada
- 7 2.10 Environmental instructions
- 8 3 Product description
- 9 3.2 Principle of operation
- 9 3.3 Packaging, transport and storage
- 10 3.4 Accessories and replacement parts
- 12 4 Mounting
- 12 4.1 General instructions
- 13 4.2 Mounting instructions
- 18 5 Connecting to power supply
- 18 5.1 Preparing the connection
- 19 5.2 Connecting
- 20 5.3 Wiring plan, single chamber housing
- 21 5.4 Wiring plan, double chamber housing
- 23 5.5 Wiring plan, Ex-d-ia double chamber housing
- 24 5.6 Double chamber housing with VEGADIS-Adapter
- 25 5.7 Wiring plan - version IP 66/IP 68, 1 bar
- 25 5.8 Switch-on phase
- 26 6 Set up with the display and adjustment module
- 26 6.1 Insert display and adjustment module
- 27 6.2 Adjustment system
- 28 6.3 Measured value indication - Selection of national language
- 29 6.4 Parameter adjustment
- 47 6.5 Saving the parameterisation data
- 48 7 Setup with PACTware
- 48 7.1 Connect the PC
- 48 7.2 Parameter adjustment
- 50 7.3 Saving the parameterisation data
- 51 8 Set up with other systems
- 51 8.1 DD adjustment programs
- 51 8.2 Field Communicator
- 55 Bit 0 of Byte
- 55 Bit 1 of Byte
- 55 Bit 2 of Byte
- 55 Bit 3 of Byte
- 55 Bit 4 of Byte
- 55 Bit 5 of Byte
- 55 Bit 6 of Byte
- 55 Bit 12 of Byte
- 55 Bit 7 of Byte
- 55 Bit 8 of Byte