advertisement
Chapter 1
Before Use
This chapter
describes the items required to understand before use, such as the name of each part of the machine or the installation procedures.
About installing this machine ........................ 1-2
Where to Install This Machine ..................... 1-2
Working Environmental Temperature ......... 1-2
About fixing machine ................................... 1-2
Moving This Machine .................................. 1-2
Names of Parts and Functions ......................1-3
Front Side of the Machine ........................... 1-3
Rear Side and Right Side of the Machine ... 1-4
Operation Panel .......................................... 1-5
Pre-Heater ................................................... 1-7
Media sensor ............................................... 1-7
Carriage ...................................................... 1-7
Capping station ........................................... 1-8
Pinch rollers and Feed rollers ..................... 1-8
Connecting Cables ........................................1-8
Connecting USB2.0 Interface Cable ............1-8
Connecting the LAN cable ...........................1-9
Connecting Power Supply Cable ...............1-10
Fill ink in the ink tank and charging .............1-11
Caution in handling of ink bottles ...............1-13
Media ..........................................................1-14
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 15 About installing this machine
- 15 Where to Install This Machine
- 15 Working Environmental Temperature
- 15 About fixing machine
- 15 Moving This Machine
- 15 Names of Parts and Functions
- 15 Front Side of the Machine
- 15 Rear Side and Right Side of the Machine
- 15 Operation Panel
- 15 Pre-Heater
- 15 Media sensor
- 15 Carriage
- 15 Capping station
- 15 Pinch rollers and Feed rollers
- 15 Connecting Cables
- 15 Connecting USB2.0 Interface Cable
- 15 Connecting the LAN cable
- 15 Connecting Power Supply Cable
- 15 Fill ink in the ink tank and charging
- 15 Caution in handling of ink bottles
- 15 Media
- 15 Usable sizes of media
- 15 Caution in handling of medias
- 16 Workflow
- 16 Turning the Power ON/OFF
- 16 Turning the Power ON
- 16 Turning the Power OFF
- 16 Setting a Media
- 16 Adjusting the Head Height and Jam sensor Height
- 16 Note for media setting
- 16 Setting a roll media
- 16 Use the image quality confirmation LED light to check the print
- 16 Setting a narrow roll media
- 29 (twin rolls)
- 29 Setting media by using the narrow take-up device
- 29 Setup to “OFF
- 29 position to remove the roll shaft
- 29 Set media by using the narrow take-up device
- 29 Set media by using the narrow take-up device (twin rolls)
- 29 Setting leaf media
- 29 Removing the taken-up media
- 29 Changing the printing origin
- 29 Preparing for the Heaters
- 29 Changing the Temperature Settings for the Heaters
- 29 Test Printing
- 29 Head Cleaning
- 29 About head cleaning
- 29 Perform head cleaning depending on the test printing result
- 29 Setting of Media Correction
- 29 Setting of Media Correction
- 29 Correct the ink drop position for bidirectional printing
- 29 Printing Data
- 29 Starting a Printing Operation
- 29 Stopping a Printing Operation
- 29 Deleting Received Data (Data Clear)
- 30 About Setup MENU
- 30 Setup MENU table
- 30 Register the optimal print conditions to match the use
- 30 Setting of Media Correction
- 30 If the Positions of Dots Shift
- 30 Setting the Heater
- 30 Setting of Logical Seek
- 30 Setting of Overprint
- 30 Setting of Left and Right Margins
- 30 Setting of UV mode
- 30 Setting of Refresh
- 30 Setting of Vacuum Fan
- 30 Setting of Print Speed
- 30 Setting of MAPS
- 30 Setting Auto Cleaning
- 30 Setting Interval wiping
- 30 Setting of LT mode
- 30 About Machine Setup MENU
- 30 Machine Setup MENU table
- 30 Setting a AUTO Power-off
- 30 Setting Feeding unit
- 30 Setting Take-up unit
- 30 Setting the Display of Media Remain
- 30 Setting Time
- 82 Setting Unit (Temperature/ Length)
- 82 Setting a Key Buzzer
- 82 Setting the Display of Media Detection
- 82 Setting the CONFIRM. FEED
- 82 Set the network
- 82 Setting event mail function
- 82 Setting the Setting Lock function
- 82 Initializing the Settings
- 82 About Nozzle Check MENU
- 82 Nozzle Check MENU table
- 82 Printing Check Flow
- 82 Occurrence
- 82 Setting the Printing Check
- 82 Setting the Auto Nozzle Recoverry
- 82 Setting the Judgement Condition
- 82 About Information MENU
- 82 Information MENU table
- 82 Displaying the Information
- 82 Displaying the Information of this machine
- 82 Setting a Language
- 83 Maintenance
- 83 Precautions for Maintenance
- 83 About Cleaning Solution
- 83 Cleaning the Exterior Surfaces
- 83 Cleaning the Platen
- 83 Image quality confirmation LED Light
- 83 Cleaning the Media Sensor
- 83 Cleaning the Media Press
- 83 About Maintenance MENU
- 83 Maintenance MENUs at-a-glance
- 83 Maintaining the Capping Station
- 83 Cleaning the Wiper and Cap
- 83 Washing the Ink Discharge Passage
- 83 Cleaning the Ink Head and the Area around It
- 83 When nozzle missing Cannot Be Solved
- 83 Washing the Head Nozzle
- 83 Nozzle Recovery Function
- 83 Automatic Maintenance Function
- 83 Setting the Refreshing level
- 83 Setting the Cleaning level
- 83 Setting the Cleaning level for White ink
- 83 About white ink circulation function
- 83 Discarding waste ink
- 83 For waste ink remaining management
- 83 Adjust the waste ink
- 83 Replacing consumables
- 83 Replacing the wiper
- 110 Replacing the Mist Fan Filter (H fan filter)
- 110 Replace the ink tank and ink fillter
- 110 Tank Calibration
- 110 Replacing the cap absorber
- 110 Refilling antifreeze mixed water
- 110 Refill antifreeze mixed water
- 111 Troubleshooting
- 111 Power does not turn on
- 111 The machine does not start printing
- 111 Media get jammed / media is soiled
- 111 Image quality is poor
- 111 Nozzle is clogged
- 111 Ink tank warning appears
- 111 When the ink leakage occurs
- 111 If an error related to the Sub Tank occurs (Error 618 to 61b)
- 111 If nozzle missing due to color mixture of ink or aeration
- 111 When media heaves up at feeding
- 111 Warning / Error Messages
- 111 Warning messages
- 111 Error messages
- 112 Specifications
- 112 Machine specifications
- 112 Ink specifications
- 112 Supply item list
- 112 Setting orders of ink tanks
- 112 Sheet for inquiry