advertisement
Analytics: SD (Sound Detection)
As many security incidents are preceded or initiated by some kind of noise, this function will alert you when your NVR detects audio that matches or exceeds the set trigger level.
· Don’t forget to click “Save” to apply settings.
· Click the “Default” button to revert back to default settings.
· Click the “Close” button to exit the Main Menu.
Channel: Select a camera that you would like to edit.
Enable: Click the drop down menu to enable.
Buzzer: When your NVR detects audio that matches or exceeds the set trigger level, you can enable your NVR’s buzzer to alert you for a predetermined amount of time.
Live Level: This gives you a real-time reading of the audio that your NVR detects using the camera’s built-in microphone.
Trigger Level: Click and hold the slider left or right to set the desired trigger level. For example, if you set the trigger level to 20, any audio detected that matches or exceeds this level, an event will occur and an alert will be sent.
Post Recording: This instructs your NVR to record for a set period of time after an event has occurred.
Show Message: The analytic icon will appear on-screen when an event has occurred. Click the checkbox if you want to disable this.
Send Email: Click the checkbox to enable your NVR to send an email alert when audio matches or exceeds the set trigger level.
Full Screen: Click the checkbox to view the camera full screen in Live View mode when audio matches or exceeds the set trigger level.
Push: Click the checkbox to receive notifications via the HomeSafe View app.
Record Channel: This instructs your NVR to trigger additional cameras to start recording when audio matches or exceeds the set trigger level. Click the checkbox to select all cameras or click on the individual camera number.
57
advertisement
Related manuals
advertisement
Table of contents
- 2 Important Information
- 3 Password Recovery
- 6 Live View
- 7 Live View Mode
- 8 Live View Icons & Controls
- 9 Main Menu
- 10 Menu Layout
- 11 Camera Configuration
- 12 Display: Live
- 14 Display: Image Control
- 17 Display: Privacy Zone
- 18 Creating a Privacy Mask
- 19 Record: Mainstream (4K Camera)
- 22 Record: Mainstream (5MP Camera)
- 25 Record: Substream (4K Camera)
- 27 Record: Substream (5MP Camera)
- 29 Record: Mobilestream (4K Camera)
- 31 Alarm: Motion
- 33 Motion Detection Setup
- 34 Motion Detection Tips
- 35 Thermal-Sensing Camera Tips
- 36 Alarm: Deterrent (Spotlight Security Camera)
- 38 Spotlight and Siren Detection Setup
- 39 Spotlight and Siren Trigger Schedule
- 40 Device: PTZ
- 41 Controlling your PTZ Camera
- 42 Creating a Preset
- 43 Display: IP Channel
- 44 Analytics (4K Camera)
- 45 Analytics: PID (Perimeter Intrusion Detection)
- 46 Drawing a Perimeter Intrusion Region
- 47 Analytics: LCD (Line Crossing Detection)
- 48 Drawing a Detection Line
- 49 Analytics: SOD (Stationary Object Detection)
- 50 Drawing an Object Detection Region
- 51 Analytics: PD (Pedestrian Detection)
- 52 Drawing a Pedestrian Detection Region
- 53 Analytics: FD (Face Detection)
- 54 Drawing a Face Detection Region
- 55 Analytics: CC (Cross Counting)
- 56 Drawing a Counting Line
- 57 Analytics: SD (Sound Detection)
- 58 Recording Configuration
- 59 Record: Record
- 60 Record: Schedule
- 61 Capture: Capture
- 62 Capture: Schedule
- 63 Analytics: Schedule (4K Camera)
- 64 Playback & Backup
- 65 Search: General