Record: Schedule. Swann SWDVK-849808

Record: Schedule

By default, a Motion schedule has been enabled for each camera connected, however you can change the schedule to suit your needs. The schedule is presented as a

24-hour 7 days a week grid and is color coded to represent the event type.

· Don’t forget to click “Save” to apply settings.

· Use the “Copy” function to apply all settings to the other cameras.

· Click the “Default” button to revert back to default settings.

· Click the “Close” button to exit the Main Menu.

Channel: Select a camera that you would like to edit.

Normal: Your NVR will constantly record for a set period of time.

Motion: Your NVR will only record when motion has been detected from one or more cameras.

Each square represents 30 minutes. Using the mouse, select the desired recording mode then click on a particular square to change or click and drag the mouse over the squares corresponding to your desired time period. The same action can also be applied if Normal and Motion recording is not required on one or more sections that have recording enabled.

In the above example, a Motion recording schedule has been created for

12:00 a.m. to 06:00 p.m. and a Normal recording schedule for 06:00 p.m. to

12:00 a.m. Sunday to Saturday.

Click for contents

To search for and play previous Normal and Motion recordings (see page 65

- Search: General).

60