Water Dispenser Tank (Non plumbed models only). LG GS-L6013PZ, GS-J6011SB, GS-X6018MT, GS-X6010MC, GS-L6012PZ, GS-X6011NS

Setting the Temperature

This sets the fridge temperature or freezer temperature.

• Press the Fridge button or Freezer button to adjust the temperature.

• The temperature can be adjusted.

− Fridge : from 1 °C to 7 °C

− Freezer : from -14 °C to -24 °C

NOTE

• The default temperature setting may vary depending on the appliance.

• Wait until two or three hours have passed after connecting the appliance to the outlet before storing food in the appliance.

• For ice making in normal climates, the freezer temperature should be set to -19 °C or colder.

Setting Express Freeze

The function can quickly freeze a large amount of ice or frozen foods.

• When you press the Express Freeze button, the Express Freeze icon lights on the control panel.

• The function is enabled and disabled in turn each time you press the button.

• The Express Freeze function automatically terminates after a specific period has passed.

Setting Hygiene Fresh

Bacteria and odor inside the appliance can be minimized with the Hygiene Fresh function.

However, the function is only effective for bacteria floating in the appliance, not bacteria adsorbed onto food.

• Each time you press the Hygiene Fresh button, the Hygiene Fresh function mode will change to

Auto → Power → Off → Auto alternatively.

EN

Setting and Resetting Lock

This locks the buttons on the control panel.

• Press and hold the Lock button for 3 seconds

. When the Lock function is set, all buttons are locked.

• When you press the Lock button for 3 seconds, the Lock/Unlock icon on the control panel lights. The function is enabled and disabled in turn each time you press the button.

• If you press a button other than lock when the lock is set, the button will not function.

• When you press a button other than lock when the lock is set, the Lock/Unlock icon on the control panel will flash 3 times.

• To change a setting, first press the Lock button for three seconds to disable the function.

Water Dispenser Tank (Non plumbed models only)

The water tank holds the water in which is to be dispensed or used by the automatic ice maker to make ice. Do not fill this tank with any other liquid other than water. Doing so can damage the water dispensing system.

1 Remove the water dispenser tank by pulling it out while holding the handle.

24

2

Open the cover or cap of the water dispenser tank.

3

4

5

Fill with bottle filtered or clean filtered water up to the reference line indicated inside the water dispenser tank. (Total capacity: 4 ℓ)

After filling with water, close the cover or cap of the water dispenser tank.

Refit the water dispenser tank on the fridge shelf.

EN

WARNING

• Children should not be allowed near the dispenser tank.

• Do not fill the water tank with drinks other than water or fill with hot water.

CAUTION

• Do not apply excessive force or impact when removing or assembling the water dispenser tank. Doing so can cause appliance damage or injury.

NOTE

• Before using the water dispenser tank after installing the appliance, it should be washed before filling it with water.

• Check if the water dispenser tank has been placed on the appliance correctly. If it is not assembled correctly, water may leak from the tank into the appliance.

• If there is an insufficient amount of water in the water dispenser tank, ice cube size and quantity may be affected and may result in no ice being made.

• If there is no water in the water dispenser tank, the cold water and ice dispensing function of the dispenser cannot be used. Check if there is water in the water dispenser tank and then fill it with water if there is not.

• Wait at least 15 seconds before removing the water tank after having dispensed water or ice from the dispenser.

• Sound from the water tank will be normal when supplying water to the dispenser and the Automatic Ice Maker. It is not a sign of malfunction.

25