advertisement
8 www.aeg.com
5. PROGRAMME SELECTION
5.1 MY TIME
Using MY TIME selection bar, you can select a suitable wash cycle based on programme duration, ranging from 30 minutes to four hours.
A B C D E
A. Quick is the shortest programme
(30min) suitable for washing a load with fresh and light soil.
B. 1h is a programme suitable for washing a load with fresh and lightly dried-on soil.
C. 1h 30min is a programme suitable for washing and drying normally soiled items.
D. 2h 40min is a programme suitable for washing and drying heavily soiled items.
E. ECO is the longest programme (4h) offering the most efficient use of energy and water consumption for crockery and cutlery with normal soil.
This is the standard programme for test institutes.
5.2 EXTRAS
You can adjust the programme selection to your needs by activating EXTRAS.
5.4 Programmes overview
ExtraSilent
ExtraSilent allows to reduce the noise generated by the appliance. When the option is activated, the wash pump works quietly at a lower speed. Due to the low speed, the programme duration is longer.
ExtraPower
ExtraPower improves the washing results of the selected programme. The option increases the wash temperature and duration.
GlassCare
GlassCare provides special care for a delicate load. The option prevents rapid changes in the wash temperature of the selected programme and reduces it to
45 °C. This protects glassware in particular from damaging.
5.3 AUTO Sense
The AUTO Sense program automatically adjusts the wash cycle to the type of load.
The appliance senses the degree of soil and the amount of dishes in the baskets.
It adjusts the temperature and quantity of water as well as the wash duration.
Pro‐ gramme
Quick
Type of load Degree of soil
• Crockery
• Cutlery
• Fresh
Programme phases EXTRAS
• Wash 50 °C
• Intermediate rinse
• Final rinse 45 °C
• AirDry
• ExtraPower
• GlassCare
advertisement
Related manuals
advertisement
Table of contents
- 8 ExtraSilent
- 8 ExtraPower
- 8 GlassCare
- 9 Consumption values
- 10 Information for test institutes
- 12 How to navigate in setting mode
- 13 How to enter setting mode
- 13 How to change a setting
- 13 How to fill the salt container
- 18 How to start the Machine Care programme
- 34 ExtraSilent
- 34 ExtraPower
- 34 GlassCare
- 36 Verbrauchswerte
- 36 Informationen für Prüfinstitute
- 39 Navigieren im Einstellmodus
- 39 Aufrufen des Einstellmodus
- 39 Ändern einer Einstellung
- 40 So füllen Sie den Salzbehälter
- 46 Starten des Machine Care Programms