1. BASIC INFORMATION BEFORE OPERATION
8. LINKING MULTI-INFORMATION DISPLAY AND THE SYSTEM
The following functions of the system are linked with the multi-information display in the instrument cluster:
• Phone
• Fuel consumption etc.
These functions can be operated using multi-information display control switches on the steering wheel. For details, refer to “Owner’s Manual”.
2
HIGHLANDER_Navi_U
43
2. Bluetooth
®
SETTINGS
1. REGISTERING/CONNECTING Bluetooth
®
DEVICE
REGISTERING A Bluetooth
®
PHONE FOR THE FIRST TIME
To use the hands-free system, it is necessary to register a Bluetooth
® phone with the system.
Once the phone has been registered, it is possible to use the hands-free system.
This operation cannot be performed while driving.
For details about registering a
Bluetooth
®
device:
P.52
1
Turn the Bluetooth
®
connection setting of your cellular phone on.
This function is not available when
Bluetooth
®
connection setting of your cellular phone is set to off.
2
Press the “APPS” button.
5
When this screen is displayed, search for the device name displayed on this screen on the screen of your
Bluetooth
®
device.
For details about operating the Bluetooth
® device, see the manual that comes with it.
To cancel the registration, select “Cancel” .
6
Register the Bluetooth
®
device using your Bluetooth
®
device.
A PIN-code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the type of Bluetooth
®
device being connected, a message confirming registration may be displayed on the Bluetooth
® device’s screen. Respond and operate the
Bluetooth
®
device according to the confirmation message.
3
Select “Phone” .
Operations up to this point can also be performed by pressing the switch on the steering wheel or switch on the instrument panel.
4
Select “Yes” to register a phone.
44
HIGHLANDER_Navi_U
2. Bluetooth
®
SETTINGS
7
Check that the screen is displayed when registration is complete.
The system waits for connection requests coming from the registered device.
At this stage, the Bluetooth
®
functions are not yet available.
8
Select “OK” when the connection status changes from “Connection waiting...” to “Connected”.
1
Turn the Bluetooth
®
connection setting of your audio player on.
This function is not available when the
Bluetooth
®
connection setting of your audio player is set to off.
2
Press the “AUDIO” button.
2
If an error message is displayed, follow the guidance on the screen to try again.
REGISTERING A Bluetooth
®
AUDIO PLAYER FOR THE
FIRST TIME
3
Select “Source” on the audio screen or press “AUDIO” button again.
4
Select “ Audio” .
5
Select “Yes” to register an audio player.
6
Follow the steps in “REGISTERING A
Bluetooth
®
(
P.52)
DEVICE” from “STEP 2”.
To use the Bluetooth
®
Audio, it is necessary to register an audio player with the system.
Once the player has been registered, it is possible to use the Bluetooth
®
Audio.
This operation cannot be performed while driving.
For details about registering a
Bluetooth
®
device:
P.52
45
HIGHLANDER_Navi_U
2. Bluetooth
®
SETTINGS
PROFILES
This system supports the following services.
Bluetooth
®
Device
Bluetooth
®
Phone/
Bluetooth
®
Audio
Player
Bluetooth
®
Device
Bluetooth
®
Spec.
Specification
Profile
Function
Registering a
Bluetooth
® vice
de-
Function
HFP (Hands-Free Profile)
Hands-free system
Bluetooth
®
Phone
OPP (Object Push Profile)
PBAP (Phone Book Access profile)
MAP (Message Access
Profile)
SPP (Serial Port Profile)
Transferring the contacts
Bluetooth
® phone message
Connected navigation*
1
/Entune
App Suite*
2
Bluetooth
®
Audio
Player
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote Control Profile)
*
1
: Entune Audio Plus
*
2
: Entune Premium Audio
Bluetooth
®
audio system
Requirements
Ver. 2.0
Ver. 1.0
Ver. 1.0
Requirements
Ver. 1.0
Ver. 1.1
Ver. 1.0
Recommendations
Ver. 3.0
+EDR
Recommendations
Ver. 1.6
Ver. 1.2
Ver. 1.1
Ver. 1.0
Ver. 1.1
Ver. 1.2
Ver. 1.4
INFORMATION
●
If your cellular phone does not support HFP, registering the Bluetooth
®
phone or using
OPP, PBAP, MAP or SPP profiles individually will not be possible.
●
If the connected Bluetooth
®
device version is older than recommended or incompatible, the Bluetooth
®
device function may not work properly.
●
Refer to http://www.toyota.com/entune/ to find approved Bluetooth
® tem.
phones for this sys-
46
HIGHLANDER_Navi_U
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
2. Bluetooth ® SETTINGS
2
HIGHLANDER_Navi_U
47
2. Bluetooth
®
SETTINGS
CERTIFICATION
U.S.A. (Entune Audio Plus)
FCC ID: AJDK066
This device complies with Part 15 of
FCC Rules and Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
CAUTION:
FCC WARNING:
Information to User-Alteration or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.
RF Exposure Compliance:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Canada (Entune Audio Plus)
IC: 775E-K066
This device complies with part 15 of
FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Le présent appareil est conforme aux la partie 15 des règles de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
48
HIGHLANDER_Navi_U
2. Bluetooth
®
SETTINGS
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the
FCC radio frequency (RF) Exposure
Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements
énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF)
CNR-102 de l’IC. Cet équipement doit
être installé et utilisé en gardant une distance de 20 cm ou plus entre le dispositif rayonnant et le corps.
U.S.A. (Entune Premium Audio)
FCC ID: ACJ932YEAP01A727
NOTE:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.
CAUTION:
Radio frequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
49
HIGHLANDER_Navi_U