Toyota Sequoia Owner's manual

Toyota Sequoia Owner's manual

1

QUICK GUIDE

2

BASIC FUNCTION

3

AUDIO SYSTEM

4

VOICE COMMAND SYSTEM

5

INFORMATION

6

PERIPHERAL MONITORING SYSTEM

7

PHONE

8

NAVIGATION SYSTEM*

9

Entune App Suite*

INDEX

For more information about the following items, see the “Owner’s Manual”.

Fuel consumption

Vehicle customization settings

171

175

185

227

295

309

11

29

67

159

*

: Entune Premium Audio only

1

2

Introduction

NAVIGATION SYSTEM OWNER’S MANUAL

This manual explains the operation of the navigation/multimedia system.

Please read this manual carefully to ensure proper use. Keep this manual in your vehicle at all times.

The screen shots in this document and the actual screens of the navigation/ multimedia system differ depending on whether the functions and/or a contract existed and the map data available at the time of producing this document.

Please be aware that the content of this manual may be different from the navigation/multimedia system in some cases, such as when the system’s software is updated.

NAVIGATION SYSTEM

The Navigation System is one of the most technologically advanced vehicle accessories ever developed. The system receives satellite signals from the Global

Positioning System (GPS) operated by the U.S. Department of Defense. Using these signals and other vehicle sensors, the system indicates your present position and assists in locating a desired destination.

The navigation system is designed to select efficient routes from your present starting location to your destination. The system is also designed to direct you to a destination that is unfamiliar to you in an efficient manner. Map database is made based on AISIN AW maps, whose information source comes from HERE maps. The calculated routes may not be the shortest nor the least traffic congested. Your own personal local knowledge or “short cut” may at times be faster than the calculated routes.

The navigation system’s database includes Point of Interest categories to allow you to easily select destinations such as restaurants and hotels. If a destination is not in the database, you can enter the street address or a major intersection close to it and the system will guide you there.

The system will provide both a visual map and audio instructions. The audio instructions will announce the distance remaining and the direction to turn in when approaching an intersection. These voice instructions will help you keep your eyes on the road and are timed to provide enough time to allow you to maneuver, change lanes or slow down.

Please be aware that all current vehicle navigation systems have certain limitations that may affect their ability to perform properly. The accuracy of the vehicle’s position depends on satellite conditions, road configuration, vehicle condition or other circumstances. For more information on the limitations of the

system, refer to page 290.

3

4

IMPORTANT INFORMATION ABOUT THIS MANUAL

For safety reasons, this manual indicates items requiring particular attention with the following marks.

WARNING

This is a warning against anything which may cause injury to people if the warning is ignored. You are informed about what you must or must not do in order to reduce the risk of injury to yourself and others.

NOTICE

This is a warning against anything which may cause damage to the vehicle or its equipment if the warning is ignored. You are informed about what you must or must not do in order to avoid or reduce the risk of damage to your vehicle and its equipment.

SYMBOLS USED IN ILLUSTRATIONS

Safety symbol

The symbol of a circle with a slash through it means “Do not”, “Do not do this” or “Do not let this happen”.

Arrows indicating operations

Indicates the action (pushing, turning, etc.) used to operate switches and other devices.

HOW TO READ THIS MANUAL

No.

Name

Operational

Outlines

Main Operations

Related Operations

Information

Description

An outline of the operation is explained.

The steps of an operation are explained.

A main operation’s supplementary operations are described.

Useful information for the user is described.

5

SAFETY INSTRUCTION

(ENTUNE PREMIUM AUDIO)

WARNING

For safety, the driver should not operate the navigation system while he/she is driving. Insufficient attention to the road and traffic may cause an accident.

While driving, be sure to obey the traffic regulations and maintain awareness of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated information such as the direction of a one way street.

To use this system in the safest possible manner, follow all the safety tips shown below.

This system is intended to assist in reaching the destination and, if used properly, can do so. The driver is solely responsible for the safe operation of your vehicle and the safety of your passengers.

Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations.

Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Owner’s Manual to make sure you understand the system.

Do not allow other people to use this system until they have read and understood the instructions in this manual.

For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed. Only when the vehicle is not moving, can the destination and route selection be done.

While driving, listen to the voice instructions as much as possible and glance at the screen briefly and only when it is safe.

However, do not totally rely on voice guidance. Use it just for reference. If the system cannot determine the current position correctly, there is a possibility of incorrect, late, or non-voice guidance.

The data in the system may occasionally be incomplete. Road conditions, including driving restrictions (no left turns, street closures, etc.) frequently change. Therefore, before following any instructions from the system, look to see whether the instruction can be done safely and legally.

This system cannot warn about such things as the safety of an area, condition of streets, and availability of emergency services. If unsure about the safety of an area, do not drive into it. Under no circumstances is this system a substitute for the driver’s personal judgement.

Use this system only in locations where it is legal to do so. Some states/provinces may have laws prohibiting the use of video and navigation screens next to the driver.

6

SAFETY INSTRUCTION

(ENTUNE AUDIO PLUS)

To use this system in the safest possible manner, follow all the safety tips shown below.

Do not use any feature of this system to the extent it becomes a distraction and prevents safe driving. The first priority while driving should always be the safe operation of the vehicle. While driving, be sure to observe all traffic regulations.

Prior to the actual use of this system, learn how to use it and become thoroughly familiar with it. Read the entire Owner’s Manual to make sure you understand the system.

Do not allow other people to use this system until they have read and understood the instructions in this manual.

For your safety, some functions may become inoperable when driving. Unavailable screen buttons are dimmed.

WARNING

For safety, the driver should not operate the Multimedia System while he/she is driving. Insufficient attention to the road and traffic may cause an accident.

7

TABLE OF CONTENTS

1

QUICK GUIDE

1. CONTROLS AND FEATURES ........ 12

CONTROLS OVERVIEW....................... 12

“Apps” SCREEN .................................... 14

“Home” SCREEN ................................... 16

“Setup” SCREEN ................................... 20

2. NAVIGATION OPERATION ............ 22

REGISTERING HOME .......................... 22

REGISTERING PRESET

DESTINATIONS.................................. 24

OPERATION FLOW:

GUIDING THE ROUTE ....................... 25

SETTING HOME AS

THE DESTINATION ............................ 26

3. FUNCTION INDEX ........................... 27

FUNCTION INDEX ................................ 27

2

BASIC FUNCTION

1. BASIC INFORMATION

BEFORE OPERATION .................. 30

INITIAL SCREEN................................... 30

TOUCH SCREEN GESTURES ............. 32

TOUCH SCREEN OPERATION ............ 33

“Home” SCREEN OPERATION............. 34

“Apps” SCREEN OPERATION .............. 35

ENTERING LETTERS AND

NUMBERS/LIST SCREEN

OPERATION ....................................... 36

SCREEN ADJUSTMENT....................... 39

LINKING MULTI-INFORMATION

DISPLAY AND THE SYSTEM............. 41

2. Bluetooth

®

SETTINGS.................... 42

REGISTERING/CONNECTING

Bluetooth

®

DEVICE............................. 42

SETTING Bluetooth

®

DETAILS ............. 47

3. OTHER SETTINGS ......................... 54

GENERAL SETTINGS ........................... 54

VOICE SETTINGS ................................. 59

VEHICLE SETTINGS ............................. 61

DRIVER SETTINGS............................... 62

MAINTENANCE ..................................... 63

3

AUDIO SYSTEM

1. BASIC OPERATION ....................... 70

QUICK REFERENCE............................. 70

SOME BASICS....................................... 72

2. RADIO OPERATION....................... 77

AM/FM RADIO............................................... 77

XM Satellite Radio.................................. 87

INTERNET RADIO ................................. 93

3. MEDIA OPERATION....................... 94

CD .......................................................... 94

USB MEMORY....................................... 97

iPod ...................................................... 101

Bluetooth

®

AUDIO................................ 105

AUX.......................................................... 109

4. AUDIO REMOTE CONTROLS...... 111

STEERING SWITCHES ....................... 111

5. SETUP........................................... 112

AUDIO SETTINGS ............................... 112

6. TIPS FOR OPERATING

THE AUDIO SYSTEM.................. 114

OPERATING INFORMATION .............. 114

7. REAR SEAT ENTERTAINMENT

SYSTEM OPERATION ................ 123

REAR SEAT ENTERTAINMENT

SYSTEM FEATURES........................ 123

PLAYING A Blu-ray Disc™ (BD)

AND DVD DISCS............................... 136

PLAYING AN AUDIO CD AND

MP3/WMA DISCS.............................. 149

PLAYING AN SD CARD....................... 152

USING THE VIDEO MODE.................. 157

8

4

VOICE COMMAND SYSTEM

7

PHONE

1

1. VOICE COMMAND SYSTEM

OPERATION ................................ 160

VOICE COMMAND SYSTEM.............. 160

CASUAL SPEECH

RECOGNIZATION ............................ 165

COMMAND LIST ................................. 166

2. MOBILE ASSISTANT

OPERATION ................................ 168

MOBILE ASSISTANT .......................... 168

5

INFORMATION

1. INFORMATION .............................. 172

RECEIVING WEATHER

INFORMATION ................................. 172

RECEIVING TRAFFIC MAP

INFORMATION ................................. 173

DATA SERVICES SETTINGS ............. 174

1. PHONE OPERATION

(HANDS-FREE SYSTEM

FOR CELLULAR PHONES)........ 186

QUICK REFERENCE .......................... 186

SOME BASICS .................................... 187

CALLING ON

THE Bluetooth

®

PHONE ................... 191

RECEIVING ON

THE Bluetooth

®

PHONE ................... 198

TALKING ON

THE Bluetooth

®

PHONE ................... 199

Bluetooth

®

PHONE MESSAGE

FUNCTION ........................................ 202

2. SETUP........................................... 207

PHONE/MESSAGE SETTINGS .......... 207

3. WHAT TO DO IF... ....................... 219

TROUBLESHOOTING ......................... 219

2

3

4

5

6

7

8

6

PERIPHERAL MONITORING

SYSTEM

9

1. REAR VIEW MONITOR

SYSTEM ....................................... 176

REAR VIEW MONITOR SYSTEM....... 176

REAR VIEW MONITOR SYSTEM

PRECAUTIONS ................................ 178

THINGS YOU SHOULD KNOW .......... 183

9

TABLE OF CONTENTS

8

NAVIGATION SYSTEM

9

Entune App Suite

1. BASIC OPERATION ...................... 228

QUICK REFERENCE .......................... 228

MAP SCREEN OPERATION ............... 231

MAP SCREEN INFORMATION ........... 237

TRAFFIC INFORMATION.................... 241

2. DESTINATION SEARCH ............... 244

DESTINATION SEARCH SCREEN..... 244

SEARCH OPERATION........................ 246

STARTING ROUTE GUIDANCE ......... 257

3. ROUTE GUIDANCE....................... 261

ROUTE GUIDANCE SCREEN ............ 261

TYPICAL VOICE GUIDANCE

PROMPTS......................................... 266

EDITING ROUTE................................. 267

4. MEMORY POINTS ......................... 271

MEMORY POINTS SETTINGS ........... 271

5. SETUP ........................................... 280

DETAILED NAVIGATION

SETTINGS ........................................ 280

TRAFFIC SETTINGS........................... 284

6. TIPS FOR THE NAVIGATION

SYSTEM ....................................... 290

GPS (GLOBAL POSITIONING

SYSTEM) .......................................... 290

MAP DATABASE VERSION

AND COVERED AREA ..................... 292

1. Entune App Suite OVERVIEW .... 296

Entune App Suite SERVICE................. 296

2. Entune App Suite

OPERATION................................ 301

Entune App Suite ................................. 301

3. SETUP........................................... 308

Entune App Suite SETTINGS .............. 308

INDEX

ALPHABETICAL INDEX ................... 310

10

1

QUICK GUIDE

2

1

CONTROLS AND FEATURES

3

1. CONTROLS OVERVIEW .............. 12

2. “Apps” SCREEN .......................... 14

4

3. “Home” SCREEN ......................... 16

STATUS DISPLAY.............................

18

5

4. “Setup” SCREEN ......................... 20

6

2

NAVIGATION OPERATION

7

1. REGISTERING HOME .................. 22

2. REGISTERING PRESET

DESTINATIONS .......................... 24

8

3. OPERATION FLOW:

GUIDING THE ROUTE................ 25

9

4. SETTING HOME AS THE

DESTINATION ............................ 26

3 FUNCTION INDEX

1. FUNCTION INDEX ........................ 27

1

11

1. CONTROLS AND FEATURES

1. CONTROLS OVERVIEW

Entune Premium Audio

Entune Audio Plus

12

1. CONTROLS AND FEATURES

No.

Function

By touching the screen with your finger, you can control the selected functions.

Insert a disc into this slot. The CD player turns on immediately.

Page

32

74

Press to access the Bluetooth

®

hands-free system and applications.

Turn to select a radio station or skip to the next or previous track/file.

Also, the knob can be used to enter selections on the list screens by pressing it.

Press to seek up or down for a radio station or to access a desired track/file.

Map card slot

Do not eject the SD card, as doing so may deactivate the navigation system.

Press to pause or resume playing music.

185

77, 87, 94,

97, 101, 105

77, 87, 94,

97, 101, 105

293

Press to display the “Home” screen.

16, 34

Press to display the “Apps” screen.

Press to access the audio system. The audio system turns on in the last mode used.

Press to turn the audio system on and off, and turn it to adjust the volume.

Press to eject a disc.

14, 35

70, 72, 73

72

74

1

13

1. CONTROLS AND FEATURES

2. “Apps” SCREEN

Press the

“APPS”

button to display the “Apps” screen.

Entune Premium Audio

Entune Audio Plus

14

1. CONTROLS AND FEATURES

No.

*

*

*

*

*

*

Function

Select to display the map screen.

Select to display the audio control screen.

Select to display the hands-free operation screen.

Select to display the “Messages” screen.

Select to display weather information.

Select to reorder the applications.

Select to display traffic incidents.

Select to display the traffic map information.

Select to display the “Setup” screen.

Select to update the Entune App Suite applications.

Select to display the “Maintenance” screen.

Select to display the application screen.

If a turn-by-turn navigation application has been downloaded to a connected phone, the application will be displayed and can be used.

For details, refer to http://www.toyota.com/entune/.

Select to display the fuel consumption screen.

*: Available in the 48 states, D.C. and Alaska

“Owner’s

Manual“

241

173

20

302

63

296

Page

228

70

186

202

172

35

1

15

1. CONTROLS AND FEATURES

3. “Home” SCREEN

Press the

“HOME”

button to display the “Home” screen.

The “Home” screen can display multiple information screens, such as the navigation system, audio system and hands-free system, simultaneously. When a screen is selected, the selected screen is switched to a full-screen display. The “Home” screen can be set to either a three-way split screen or a two-way split screen.

For details about setting the “Home” screen:

P.34

Three-way split screen

16

Two-way split screen

1. CONTROLS AND FEATURES

1

No.

Function

Displays the status display

Select to display the “Setup” screen.

Page

18

20

INFORMATION

Entune Audio Plus only: Turn-by-turn navigation application screen can be displayed.

17

1. CONTROLS AND FEATURES

STATUS DISPLAY

The condition of the Bluetooth

®

connection are displayed on the status display.

Clock

18

No.

Indicators Conditions

The condition of the Bluetooth

® connection

No connection

(Gray)

Poor

(Blue)

Good

An antenna for the Bluetooth

®

connection is built into the instrument panel. The condition of the Bluetooth

®

connection may deteriorate and the system may not function when a Bluetooth

®

phone is used in the following conditions and/or places:

The cellular phone is obstructed by certain objects (such as when it is behind the seat or in the glove box or console box).

The cellular phone is touching or is covered with metal materials.

Leave the Bluetooth

®

phone in a place where the condition of the

Bluetooth

®

connection is good.

The level of reception

The level of reception does not always correspond with the level displayed on the cellular phone. The level of reception may not be displayed depending on the phone you have.

When the cellular phone is out of the service area or in a place inaccessible by radio waves, “No Service” is displayed.

“Rm” is displayed when receiving in a roaming area. While roaming, display “Rm” top-left on the icon.

The receiving area may not be displayed depending on the type of phone you have.

1. CONTROLS AND FEATURES

No.

Indicators Conditions

The amount of battery charge left

The amount displayed does not always correspond with the amount displayed on the Bluetooth

®

device.

The amount of battery charge left may not be displayed depending on the type of the Bluetooth

®

device connected.

This system does not have a charging function.

1

19

1. CONTROLS AND FEATURES

4. “Setup” SCREEN

The items shown on the “Setup” screen can be set. Press the

“APPS”

button, then select

“Setup”

to display the “Setup” screen.

Entune Premium Audio

Entune Audio Plus

20

1. CONTROLS AND FEATURES

No.

*

*

Function

Select to change the selected language, operation sound, automatic screen change settings, etc.

Select to customize the “Home” screen.

Select to set the voice settings.

Select to adjust the contrast and brightness of the screens.

Select to set memory points (home, preset destinations, address book entries, areas to avoid), navigation details or to delete previous destinations.

Select to turn the screen off.

Select to set radio and external media settings.

Select to set the phone sound, contacts, message settings, etc.

Select to set Bluetooth

®

phones and Bluetooth

®

audio devices.

Select to set Entune App Suite settings.

Select to set data services settings.

Select to link the driver’s cellular phone settings (audio presets, language, etc.).

Select to set vehicle information.

*

Select to set traffic information.

*

Select to change the phone data plan pop-up message timing.

(Connected navigation is downloadable application via smartphones.)

*: Available in the 48 states, D.C. and Alaska

271, 280

112

207

47

308

174

62

“Owner’s

Manual“

284

Page

54

34

59

39

1

21

2. NAVIGATION OPERATION

1. REGISTERING HOME*

1

Press the “APPS” button.

4

Select “Go Home”.

2

Select “Navigation”.

5

Select “Yes”.

6

Choose a search method.

3

Select “Dest.”.

There are different kinds of methods to search for your home. (

P.244)

*:Entune Premium Audio only

22

7

Select “Enter”.

8

Select “OK”.

Registration of home is complete.

Registering home in a different way

P.272

Editing the name, location, phone number and icon

P.272

Setting home as the destination

P.247

2. NAVIGATION OPERATION

1

23

2. NAVIGATION OPERATION

2. REGISTERING PRESET DESTINATIONS*

1

Press the “APPS” button.

4

Select one of the preset destination buttons.

24

2

Select “Navigation”.

5

Select “Yes”.

6

Choose a search method.

3

Select “Dest.”.

There are different kinds of methods to search for a destination. (

P.244)

7

Select “Enter ”.

8

Select a position for this preset destination.

9

Select “OK”.

Registration of preset destinations is complete.

Registering preset destinations in a different way

P.273

Editing the name, location, phone number and icon

P.274

Setting preset destinations as the destination

P.247

*:Entune Premium Audio only

2. NAVIGATION OPERATION

3. OPERATION FLOW: GUIDING THE ROUTE*

1

Press the “APPS” button.

5

Select “Go”.

1

2

Select “Navigation”.

6

Select “OK”.

Selecting routes other than the one recommended (

P.257)

Guidance to the destination is displayed on the screen and can be heard via voice guidance.

3

Select “Dest.”.

4

Choose a search method.

There are different kinds of methods to search for a destination. (

P.244)

*:Entune Premium Audio only

25

2. NAVIGATION OPERATION

4. SETTING HOME AS THE DESTINATION*

1

Press the “APPS” button.

5

Select “OK”.

Selecting routes other than the one recommended (

P.257)

Guidance to the destination is displayed on the screen and can be heard via voice guidance.

2

Select “Navigation”.

3

Select “Dest.”.

4

Select “Go Home”.

*:Entune Premium Audio only

26

3. FUNCTION INDEX

1. FUNCTION INDEX

Map*

Displaying maps

Viewing the map screen

Displaying the current position

Viewing the current position vicinity map

Changing the scale

Changing the map orientation

Displaying Points of Interest

Displaying the estimated travel/arrival time to the destination

Selecting the map mode

Displaying traffic information

Searching for destinations

Searching for the destination

Changing the selected search area

Route guidance*

Before starting or during route guidance

Starting route guide

Editing the route

Viewing the entire route map

Address book

Registering address book entries

Marking icons on the map

Pausing guidance

Adjusting route guidance volume

Deleting the destination

*: Entune Premium Audio only

Page

257

267

262

Page

275

276

260

59

268

Page

228

231

235

231

232

237

261

233

241

Page

246

247

1

27

3. FUNCTION INDEX

Useful functions

Displaying vehicle maintenance*

Information

Hands-free system (for cellular phone)

Registering/connecting Bluetooth

®

phone

Making a call on a Bluetooth

®

phone

Receiving a call on the Bluetooth

®

phone

Voice command system

Operating the system with your voice

Peripheral monitoring system

Viewing behind the rear of the vehicle

*: Entune Premium Audio only

Page

63

Page

42

191

198

Page

160

Page

176

28

2

1

BASIC FUNCTION

2

1

BASIC INFORMATION

BEFORE OPERATION

1. INITIAL SCREEN ........................... 30

2. TOUCH SCREEN GESTURES ...... 32

3. TOUCH SCREEN OPERATION .... 33

4. “Home” SCREEN OPERATION.... 34

5. “Apps” SCREEN OPERATION..... 35

6. ENTERING LETTERS AND

NUMBERS/LIST SCREEN

OPERATION ................................ 36

ENTERING LETTERS AND

NUMBERS .......................................... 36

LIST SCREEN ....................................... 36

7. SCREEN ADJUSTMENT ............... 39

8. LINKING MULTI-INFORMATION

DISPLAY AND THE SYSTEM ..... 41

2. SETTING Bluetooth

®

DETAILS ... 47

“Bluetooth* Setup” SCREEN.................. 47

REGISTERING A Bluetooth

®

DEVICE ............................................... 48

DELETING A Bluetooth

®

DEVICE ......... 49

CONNECTING A Bluetooth

®

DEVICE... 49

EDITING THE Bluetooth

®

DEVICE

INFORMATION ................................... 51

“System Settings” SCREEN .................. 52

3

4

5

6

3 OTHER SETTINGS

7

1. GENERAL SETTINGS .................. 54

GENERAL SETTINGS SCREEN ........... 54

8

2. VOICE SETTINGS......................... 59

VOICE SETTINGS SCREEN ................. 59

3. VEHICLE SETTINGS .................... 61

9

4. DRIVER SETTINGS ...................... 62

MANUALLY SELECT

LINKED SETTINGS ............................ 62

5. MAINTENANCE ............................ 63

2 Bluetooth

®

SETTINGS

1. REGISTERING/CONNECTING

Bluetooth

®

DEVICE .................... 42

REGISTERING A Bluetooth

®

PHONE FOR THE FIRST TIME.......... 42

REGISTERING A Bluetooth

®

AUDIO

PLAYER FOR THE FIRST TIME ........ 43

PROFILES ............................................. 44

CERTIFICATION ................................... 46

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

29

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

1

When the engine switch is in the “ACC” or “ON” position, the initial screen will be displayed and the system will begin operating.

MAINTENANCE INFORMATION

(ENTUNE PREMIUM AUDIO)

This system reminds users when to replace certain parts or components and shows dealer information (if registered) on the screen.

When the vehicle reaches a previously set driving distance or date specified for a scheduled maintenance check, the “Maintenance Reminder” screen will be displayed when the navigation system is turned on.

Images shown on the initial screen can be changed to suit individual preferences. (

P.57)

After a few seconds, the “Caution” screen will be displayed.

After about 5 seconds, the “Caution” screen automatically switches to the next screen. (Select

“Continue”

or press the

“HOME”

button to display the “Home” screen.)

WARNING

When the vehicle is stopped with the engine running, always apply the parking brake for safety.

To prevent the screen from being displayed again, select

“Do Not Tell Me

Again”

.

To register maintenance information:

P.63

If is selected, the registered phone number can be called.

30

RESTARTING THE SYSTEM

When system response is extremely slow, the system can be restarted.

1

Press and hold the

“PWR•VOL”

knob for 3 or more seconds.

1. BASIC INFORMATION BEFORE OPERATION

2

31

1. BASIC INFORMATION BEFORE OPERATION

2. TOUCH SCREEN GESTURES

Operations are performed by touching the touch screen directly with your finger.

Operation method Outline Main use

Touch

Quickly touch and release once.

Changing and selecting various settings

Drag*

1

Touch the screen with your finger, and move the screen to the desired position.

Scrolling the lists

Scrolling the map screen*

2

Flick*

1

Quickly move the screen by flicking with your finger.

Scrolling the main screen page

Scrolling the map screen*

2

*

1

: The operations may not be performed on all screens.

*

2

: Entune Premium Audio only

INFORMATION

The system may not recognize flick operations in high altitude.

32

1. BASIC INFORMATION BEFORE OPERATION

3. TOUCH SCREEN OPERATION

This system is operated mainly by the buttons on the screen. (Referred to as screen buttons in this manual.)

When a screen button is touched, a beep sounds. (To set the beep sound,

see page 54.)

NOTICE

To prevent damaging the screen, lightly touch the screen buttons with your finger.

Do not use objects other than your finger to touch the screen.

Wipe off fingerprints using a glass cleaning cloth. Do not use chemical cleaners to clean the screen, as they may damage the touch screen.

INFORMATION

If the system does not respond to touching the screen button, move your finger away from the screen and then touch it again.

Dimmed screen buttons cannot be operated.

The displayed image may become darker and moving images may be slightly distorted when the screen is cold.

In extremely cold conditions, the screen may not be displayed and the data input by a user may be deleted. Also, the screen buttons may not react properly.

When you look at the screen through polarized material such as polarized sunglasses, the screen may be dark and hard to see. If so, look at the screen from different angles, adjust the screen settings on the “Display Settings” screen or take off your sunglasses.

2

33

1. BASIC INFORMATION BEFORE OPERATION

4. “Home” SCREEN OPERATION

The “Home” screen can display multiple information screens, such as the navigation system, audio system and hands-free system, simultaneously.

1

2

Press the

“HOME”

button.

“Home” screen is displayed.

CUSTOMIZING THE “Home”

SCREEN

The display items/area on the “Home” screen can be changed.

1

Select .

When a screen is selected, the selected screen will change to a full-screen display.

4

5

2

Select

“Home Screen”

.

Select

“Two Panel”

or

“Three Panel”

.

3

Select the desired area.

Select the desired item.

Select

“OK”

.

INFORMATION

When the selected item is already being displayed and another area is selected for that item, the item that it is replacing will be displayed in the original item’s location.

34

1. BASIC INFORMATION BEFORE OPERATION

5. “Apps” SCREEN OPERATION

You can select an application such as navigation, audio, etc., from “Apps” screen.

1

Press the

“APPS”

button.

REORDERING APPLICATIONS

1

Select

“Reorder”

.

2

2

Select the desired application then

or to reorder.

3

Select

“OK”

.

2

Select the application.

INFORMATION

Dimmed screen buttons cannot be operated.

When there are several pages, select

or to change the page.

35

1. BASIC INFORMATION BEFORE OPERATION

6. ENTERING LETTERS AND NUMBERS/LIST SCREEN OPERATION*

When searching for an address, name, etc., or entering data, letters and numbers can be entered via the screen.

ENTERING LETTERS AND

NUMBERS

LIST SCREEN

The list screen may be displayed after entering characters.

DISPLAYING THE LIST

1

Enter characters and select

“OK”

.

No.

Function

Select to enter desired characters.

Text field. Entered character(s) will be displayed.

While typing, when there only one available option for the next character(s), the next character(s) will be displayed in gray text in the text field automatically. Gray text is entered by selecting this button.

Select to erase one character.

Select to display the alphabet keys.

Select to display other symbols.

On certain letter entry screens, letters can be entered in upper or lower case.

: Select to enter in lower case.

: Select to enter in upper case.

Matching items from the database are listed even if the entered address or name is incomplete.

The list will be displayed automatically if the maximum number of characters is entered or matching items can be displayed on a single list screen.

INFORMATION

The number of matching items is shown on the right side of the screen. If the number of matching items is more than

999, the system displays “

∗∗∗

” on the screen.

Keyboard layout can be changed.

(

P.54)

*:Entune Premium Audio only

36

1. BASIC INFORMATION BEFORE OPERATION

SELECTING ALL ITEMS

Some lists contain

“Select All”

. If

“Select All”

is selected, it is possible to select all items.

1

Select

“Select All”

.

LIST SCREEN OPERATION

When a list is displayed, use the appropriate screen button to scroll through the list.

2

“Unselect All”

: Unselect all items in the list.

Icon Function

Select to skip to the next or previous page.

Select and hold or scroll through the displayed list.

to

This indicates the displayed screen’s position.

If appears to the right of an item name, the complete name is too long to display.

Select the name.

to scroll to the end of

Select to move to the beginning of the name.

37

1. BASIC INFORMATION BEFORE OPERATION

SORTING

The order of a list displayed on the screen can be sorted in the order of distance from the current location, date, category, etc.

1

Select

“Sort”

.

CHARACTER JUMP BUTTONS

IN LISTS

Some lists contain character screen buttons, “ABC”, “DEF” etc., which allow a direct jump to list entries that begin with the same letter as the character screen button.

1

Select the desired character jump buttons.

2

Select the desired sorting criteria.

INFORMATION

Every time the same character screen button is selected, the list starting with the subsequent character is displayed.

38

1. BASIC INFORMATION BEFORE OPERATION

7. SCREEN ADJUSTMENT

The contrast and brightness of the screen display and the image of the camera display can be adjusted. The screen can also be changed to either day or night mode.

1

Press the

“APPS”

button.

INFORMATION

When the screen is viewed through polarized sunglasses, a rainbow pattern may appear on the screen due to optical characteristics of the screen. If this is disturbing, please operate the screen without polarized sunglasses.

2

2

3

4

Select

“Setup”

.

Select

“Display”

.

Select the items to be set.

No.

Function

Select to adjust the screen display.

Select to adjust the camera display.

Select to turn day mode on/ off.

Page

40

40

39

1. BASIC INFORMATION BEFORE OPERATION

ADJUSTING THE CONTRAST/

BRIGHTNESS

The contrast and brightness of the screen can be adjusted according to the brightness of your surroundings.

1

Select

“General”

or

“Camera”

.

2

Select the desired item.

General

CHANGING BETWEEN DAY

AND NIGHT MODE

Depending on the position of the headlight switch, the screen changes to day or night mode. This feature is available when the headlight is switched on.

1

Select

“Day Mode”

.

INFORMATION

If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine turned off.

Camera

Screen button

“Brightness” “+”

“Brightness” “-”

“Contrast” “+”

“Contrast” “-”

Function

Select to brighten the screen.

Select to darken the screen.

Select to strengthen the contrast of the screen.

Select to weaken the contrast of the screen.

3

Select

“OK”

.

40

1. BASIC INFORMATION BEFORE OPERATION

8. LINKING MULTI-INFORMATION DISPLAY AND THE SYSTEM

The following functions of the system are linked with the multi-information display in the instrument cluster:

• Navigation*

• Audio*

• Language etc.

These functions can be operated using multi-information display control switches on the steering wheel. For details, refer to “Owner’s Manual”.

*: If equipped

2

41

2. Bluetooth

®

SETTINGS

1. REGISTERING/CONNECTING Bluetooth

®

DEVICE

REGISTERING A Bluetooth

®

PHONE FOR THE FIRST TIME

1

To use the hands-free system, it is necessary to register a Bluetooth

® phone with the system.

Once the phone has been registered, it is possible to use the hands-free system.

For details about registering a

Bluetooth

®

device:

P.48

Turn the Bluetooth

®

connection setting of your cellular phone on.

2

Press the

“APPS”

button.

For details about operating the Bluetooth

® device, see the manual that comes with it.

To cancel the registration, select

cel”

.

“Can-

6

Register the Bluetooth

®

device using your Bluetooth

®

device.

A PIN-code is not required for SSP

(Secure Simple Pairing) compatible

Bluetooth

®

devices. Depending on the type of Bluetooth

®

device being connected, a message confirming registration may be displayed on the Bluetooth

® device’s screen. Respond and operate the

Bluetooth

®

device according to the confirmation message.

3

Select

“Phone”

.

Operations up to this point can also be performed by pressing the switch on the steering wheel or control panel.

button on the

4

5

Select

“Yes”

to register a phone.

When this screen is displayed, search for the device name displayed on this screen on the screen of your

Bluetooth

®

device.

42

2. Bluetooth

®

SETTINGS

7

Check that the screen is displayed when registration is complete.

The system waits for connection requests coming from the registered device.

At this stage, the Bluetooth

®

functions are not yet available.

8

Select

“OK”

when the connection status changes from “Connecting...” to

“Connected”.

If an error message is displayed, follow the guidance on the screen to try again.

REGISTERING A Bluetooth

®

AUDIO PLAYER FOR THE

FIRST TIME

To use the Bluetooth

®

audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the

Bluetooth

®

audio. This operation cannot be performed while driving.

For details about registering a

Bluetooth

®

device:

P.48

1

Turn the Bluetooth

®

connection setting of your audio player on.

This function is not available when the

Bluetooth

®

connection setting of your audio player is set to off.

2

Press the

“AUDIO”

button.

2

3

Select

“Source”

on the audio control screen.

4

Select

“ Audio”

.

5

6

Select

“Yes”

to register a audio player.

Follow the steps in “REGISTERING A

Bluetooth

®

DEVICE” from “STEP 2”.

(

P.48)

43

2. Bluetooth

®

SETTINGS

PROFILES

This system supports the following services.

Bluetooth

®

Device

Bluetooth

®

Phone/

Bluetooth

®

Audio

Player

Bluetooth

®

Device

Bluetooth

®

Spec

Specification

Profile

Function

Registering a

Bluetooth

® vice

de-

Function

HFP (Hands-Free Profile)

Hands-free system

Bluetooth

®

Phone

OPP (Object Push Profile)

PBAP (Phone Book Access Pro-file)

MAP (Message Access

Profile)

SPP (Serial Port Profile)

Transferring the contacts

Bluetooth

® phone message

Connected navigation*

1

/Entune

App Suite*

2

Bluetooth

®

Audio

Player

A2DP (Advanced Audio

Distribution Profile)

AVRCP (Audio/Video Remote Control Profile)

*

1

: Entune Audio Plus

*

2

: Entune Premium Audio

Bluetooth

®

audio system

Requirements

Ver. 2.0

Ver. 1.0

Ver. 1.0

Requirements

Ver. 1.0

Ver. 1.1

Ver. 1.0

Recommendations

Ver. 3.0

+EDR

Recommendations

Ver. 1.6

Ver. 1.2

Ver. 1.1

Ver. 1.0

Ver. 1.1

Ver. 1.2

Ver. 1.4

44

2. Bluetooth

®

SETTINGS

INFORMATION

If your cellular phone does not support HFP, registering the Bluetooth

®

phone or using

OPP, PBAP, MAP or SPP profiles individually will not be possible.

If the connected Bluetooth

®

device version is older than recommended or incompatible, the Bluetooth

®

device function may not work properly.

Refer to http://www.toyota.com/entune/ to find approved Bluetooth

® tem.

phones for this sys-

2

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

45

2. Bluetooth

®

SETTINGS

CERTIFICATION

U.S.A.

FCC ID: ACJ932YEAP01A727

NOTE:

This device complies with part 15 of the

FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

CAUTION:

Radio frequency radiation exposure information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

Canada

NOTE:

This device complies with Industry

Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

NOTE:

Le présent appareil est conforme aux

CNR d’Industrie Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

NOTE:

This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated.

Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

NOTE:

Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s’il fait partie du matériel de catégorie II) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.

46

2. Bluetooth

®

SETTINGS

2. SETTING Bluetooth

®

DETAILS

1

Press the

“APPS”

button.

“Bluetooth* Setup” SCREEN

2

2

3

4

Select

“Setup”

.

Select

“Bluetooth*”

.

Select the desired item to be set.

Function

Registering a Bluetooth

®

device

Deleting a Bluetooth

®

device

Connecting a Bluetooth

®

device

Editing the Bluetooth

®

device information

Bluetooth

®

system settings

Page

48

49

49

51

52

DISPLAYING THE “Bluetooth*

Setup” SCREEN IN A

DIFFERENT WAY

1

2

Press the

“APPS”

button.

Select

“Setup”

.

3

Select

“Phone”

.

4

Select

“Connect Phone”

.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

47

2. Bluetooth

®

SETTINGS

REGISTERING A Bluetooth

®

DEVICE

Up to 5 Bluetooth

®

devices can be registered.

Bluetooth

®

compatible phones (HFP) and audio players (AVP) can be registered simultaneously.

This operation cannot be performed while driving.

1

Display the “Bluetooth* Setup” screen.

(

P.47)

2

Select

“Add”

.

When another Bluetooth

®

device is connected

To disconnect the Bluetooth

®

device, select

“Yes”

.

When 5 Bluetooth

®

devices have already been registered

A registered device needs to be replaced.

Select

“Yes”

, and select the device to be replaced.

3

When this screen is displayed, search for the device name displayed on this screen on the screen of your

Bluetooth

®

device.

4

Register the Bluetooth

®

device using your Bluetooth

®

device.

A PIN-code is not required for SSP

(Secure Simple Pairing) compatible

Bluetooth

®

devices. Depending on the type of Bluetooth

®

device being connected, a message confirming registration may be displayed on the Bluetooth

® device’s screen. Respond and operate the

Bluetooth

®

device according to the confirmation message.

5

Check that the following screen is displayed when registration is complete.

The system waits for connection requests coming from the registered device.

At this stage, the Bluetooth

®

functions are not yet available.

6

Select

“OK”

when the connection status changes from “Connecting...” to

“Connected”.

If an error message is displayed, follow the guidance on the screen to try again.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

For details about operating the Bluetooth

® device, see the manual that comes with it.

To cancel the registration, select

“Cancel”

.

48

2. Bluetooth

®

SETTINGS

DELETING A Bluetooth

®

DEVICE

1

2

3

Display the “Bluetooth* Setup” screen.

(

P.47)

Select

“Remove”

.

Select the desired device.

CONNECTING A Bluetooth

®

DEVICE

Up to 5 Bluetooth

®

devices (Phones

(HFP) and audio players (AVP)) can be registered.

If more than 1 Bluetooth

®

device has been registered, select the desired device to make a connection.

1

2

Display the “Bluetooth* Setup” screen.

(

P.47)

Select the device to be connected.

2

4

Select

“Yes”

when the confirmation screen appears.

5

Check that a confirmation screen is displayed when the operation is complete.

INFORMATION

When deleting a Bluetooth

®

phone, the contact data will be deleted at the same time.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

Supported profile icons will be displayed.

: Phone

: Audio player

: Phone/Entune App Suite (Entune

Premium Audio only)

The profile icon for a currently connected device will be displayed in color.

Selecting a profile icon which is not currently connected will switch the connection to the function.

If the desired Bluetooth

®

device is not on the list, select

“Add”

to register the device. (

P.48)

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

49

2. Bluetooth

®

SETTINGS

INFORMATION

It may take time if the device connection is carried out during Bluetooth

®

audio playback.

Depending on the type of Bluetooth

® device being connected, it may be necessary to perform additional steps on the device.

AUTO CONNECTION MODE

To turn auto connection mode on, set

“Bluetooth* Power” to on. (

P.52)

Leave the Bluetooth

®

device in a location where the connection can be established.

When the engine switch is in the “ACC” or

“ON” position, the system searches for a nearby registered device.

The system will connect with the registered device that was last connected, if it is nearby.

CONNECTING MANUALLY

When the auto connection has failed or

“Bluetooth* Power” is turned off, it is necessary to connect Bluetooth

®

manually.

1

Follow the steps in “CONNECTING A

Bluetooth

®

DEVICE” from “STEP 2”.

(

P.49)

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

RECONNECTING THE Bluetooth

®

PHONE

If a Bluetooth

®

phone is disconnected due to poor reception from the

Bluetooth

®

network when the engine switch is in the “ACC” or “ON” position, the system automatically reconnects the Bluetooth

®

phone.

If the system is attempting to connect to a

Bluetooth

®

phone and the Bluetooth

® phone is turned off and then back on, the system will attempt to reconnect.

50

2. Bluetooth

®

SETTINGS

EDITING THE Bluetooth

®

DEVICE INFORMATION

The Bluetooth

®

device’s information can be displayed on the screen. The displayed information can be edited.

1

2

3

Display the “Bluetooth* Setup” screen.

(

P.47)

Select the desired device to be edited.

Select

“Device Info”

.

No.

Information

The name of the Bluetooth

®

device.

Can be changed to a desired name.

(

P.52)

Select to set the Bluetooth

®

audio player connection method. (

P.52)

Device address is unique to the device and cannot be changed.

Phone number of the Bluetooth

® phone.

Compatibility profile of the

Bluetooth

®

device.

Select to reset all setup items.

2

4

Confirm and change the Bluetooth

® device information.

INFORMATION

If 2 Bluetooth

®

devices have been registered with the same device name, the devices can be distinguished by referring to the device’s address.

Depending on the type of phone, some information may not be displayed.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

51

2. Bluetooth

®

SETTINGS

1

2

CHANGING A DEVICE NAME

Select

“Device Name”

.

Enter the name and select

“OK”

.

INFORMATION

Even if the device name is changed, the name registered in your Bluetooth

® device does not change.

“System Settings” SCREEN

The Bluetooth

®

settings can be confirmed and changed.

1

2

3

Display the “Bluetooth* Setup” screen.

(

P.47)

Select

“System Settings”

.

Select the desired item to be set.

SETTING AUDIO PLAYER

CONNECTION METHOD

1

Select

From”

.

“Connect Audio Player

2

Select the desired connection method.

“Vehicle”

: Select to connect the audio system to the audio player.

“Device”

: Select to connect the audio player to the audio system.

Depending on the audio player, the “Vehicle” or “Device” connection method may be best. As such, refer to the manual that comes with the audio player.

To reset the connection method, select

“Default”

.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

52

2. Bluetooth

®

SETTINGS

No.

Information

Select to set Bluetooth

® connection on/off.

Displays system name.

Can be changed to a desired name.

PIN-code used when the

Bluetooth

®

device was registered. Can be changed to a desired code.

Device address is unique to the device and cannot be changed.

Select to set the phone connection status display on/off.

Select to set the connection status display of the audio player on/off.

Compatibility profile of the system device.

Select to reset all setup items.

Page

53

53

53

CHANGING “Bluetooth*

Power”

1

Select

“Bluetooth* Power”

.

When “Bluetooth* Power” is on

The Bluetooth

®

device is automatically connected when the engine switch is in the

“ACC” or “ON” position.

When “Bluetooth* Power” is off

The Bluetooth

®

device is disconnected, and the system will not connect to it next time.

2

INFORMATION

While driving, the auto connection state can be changed from off to on, but cannot be changed from on to off.

EDITING THE Bluetooth* NAME

1

2

Select

“Bluetooth* Name”

.

Enter a name and select

“OK”

.

EDITING THE Bluetooth* PIN-

CODE

1

Select

“Bluetooth* PIN”

.

2

Enter a PIN-code and select

“OK”

.

*: Bluetooth is a registered trademark of

Bluetooth SIG, Inc.

53

3. OTHER SETTINGS

1. GENERAL SETTINGS

Settings are available for clock, operation sounds, etc.

1

Press the

“APPS”

button.

GENERAL SETTINGS

SCREEN

2

3

4

Select

“Setup”

.

Select

“General”

.

Select the items to be set.

54

3. OTHER SETTINGS

No.

Function

Select to adjust the clock, time zone, etc. (

P.56)

Select to change the language.

*

Select to change the unit of measure for distance.

Select to change the unit of weather temperature.

Select to sound beeps.

Select to change the screen color.

Select to change the keyboard layout.

Select to set automatic screen changes from the audio control screen to the “Home” screen to on/off. When set to on, the screen will automatically return to the “Home” screen from the audio control screen after 20 seconds.

Select to set a pop-up message displayed on an iPhone connected via

Bluetooth

®

on/off when an application on the iPhone needs to be activated.

No.

Function

Select to turn the animations on/off.

Select to customize the startup images. (

P.57)

Select to customize the screen off image. (

P.57)

Select to delete personal data.

(

P.58)

Select to update software versions.

For details, contact your Toyota dealer.

Select to update Gracenote

®

database versions. For details, contact your Toyota dealer.

Select to display the software information. Notices related to third party software used in this product are enlisted. (This includes instructions for obtaining such software, where applicable.)

Select to reset all setup items.

*: Entune Premium Audio only

2

55

3. OTHER SETTINGS

CLOCK SETTINGS

Used for adjusting the clock, time zone, etc.

1

2

3

Display the “General Settings” screen.

(

P.54)

Select

“Clock”

.

Select the items to be set.

SETTING THE TIME ZONE

1

Select

“Time Zone”

.

2

Select the desired time zone.

No.

Function

Select to adjust the clock manually.

Select to set the minutes to “00”.

Select to change the clock to 24-hour format.

Select to adjust the clock automatically by the GPS.

Entune Audio Plus

When

“Auto”

is selected, only the minutes can be set using the GPS.

Select to change the time zone.

(

P.56)

Select to set daylight saving time

“Auto”

*,

“On”

or

“Off”

. When

“Auto”

* is selected, the daylight saving time is automatically set by the GPS.

*: Entune Premium Audio only

4

Select

“OK”

.

56

3. OTHER SETTINGS

CUSTOMIZING THE STARTUP

AND SCREEN OFF IMAGES

An image can be copied from a USB memory and used as the startup and screen off images.

When the engine switch is in the “ACC” or “ON” position, the initial screen will be displayed. (

P.30)

When “Screen Off” on the “Setup” screen is selected, the screen is turned off and the desired screen off image that is set is displayed. (To turn the screen off:

P.20)

TRANSFERRING IMAGES

1

Open the cover and connect a USB memory.

INFORMATION

When saving the images to a USB, name the folder that the startup image is saved to “StartupImage” and name the folder that the screen off image is saved to “DisplayOffImage”. If these folder names are not used, the system cannot download the images. (The folder names are case sensitive.)

The compatible file extensions are JPG and JPEG.

An image’s file name, including file extension, can be up to 32 characters.

Image files of 5 MB or less can be transferred.

Up to 3 images can be downloaded.

The file name including file extension must be less than 32 characters.

Files with non-ASCII filenames cannot be downloaded.

2

6

7

3

4

Turn on the power of the USB memory if it is not turned on.

2

Press the

“APPS”

button.

5

Select

“Setup”

.

Select

“General”

.

Select

“Customize Startup Image”

or

“Customize Screen Off Image”

.

Select

“Transfer”

.

Select

“Yes”

.

57

3. OTHER SETTINGS

SETTING THE STARTUP IMAGES

1

Display the “General Settings” screen.

(

P.54)

2

Select

“Customize Startup Image”

.

3

Select the desired image.

DELETING PERSONAL DATA

1

2

3

Display the “General Settings” screen.

(

P.54)

Select

“Delete Personal Data”

.

Select

“Delete”

.

4

Select

“OK”

.

SETTINGS THE SCREEN OFF IM-

AGES

1

Display the “General Settings” screen.

(

P.54)

2

Select

“Customize Screen Off Image”

.

3

Select the desired image.

4

Select

“Yes”

when the confirmation screen appears.

Registered or changed personal settings will be deleted or returned to their default conditions.

For example:

• General settings

• Navigation settings*

• Audio settings

• Phone settings

*: Entune Premium Audio only

4

Select

“OK”

.

NOTICE

Entune Premium Audio

Make sure the map microSD card is inserted when deleting personal data.

The personal data cannot be deleted when the map microSD card is removed. To delete the data, after inserting the map microSD card, turn the engine switch to the “ACC” or “ON” position.

58

3. OTHER SETTINGS

2. VOICE SETTINGS

Voice volume, etc., can be set.

1

Press the

“APPS”

button.

VOICE SETTINGS SCREEN

2

2

3

4

Select

“Setup”

.

Select

“Voice”

.

Select the items to be set.

INFORMATION

“Voice Settings” screen can also be displayed from the voice recognition top screen. (

P.162)

59

3. OTHER SETTINGS

No.

*

*

Function

Select to adjust the volume of voice guidance.

Select to set the voice guidance during route guidance on/off.

Select to set the voice recognition prompts.

Select to train voice recognition.

The voice command system adapt the user accent.

Select to set the voice prompt interrupt on/off.

Select to set the web search engine.

The search engines are Entune App

Suite applications. (

P.301)

Select to set the voice recognition tutorial.

Select to reset all setup items.

*: Entune Premium Audio only

60

3. OTHER SETTINGS

3. VEHICLE SETTINGS

Vehicle customization settings can be changed.

1

Press the

“APPS”

button.

2

3

4

Select

“Setup”

.

Select

“Vehicle”

.

Select

“Vehicle Customization”

.

For details, refer to “Owner’s Manual”.

2

61

3. OTHER SETTINGS

4. DRIVER SETTINGS

The driver settings feature will allow the system to link some preferences

(such as audio presets, button colors, language, etc.) to a paired Bluetooth

® phone.

1

Press the

“APPS”

button.

MANUALLY SELECT LINKED

SETTINGS

1

2

Display the driver settings screen.

(

P.62)

Select

“Manually Select Linked Settings”

.

2

3

4

Select

“Setup”

.

Select

“Driver”

.

Select

“Enable this Feature”

.

3

Select the desired phone.

62

3. OTHER SETTINGS

5. MAINTENANCE*

2

3

When the system is turned on, the

“Maintenance Reminder” screen displays when it is time to replace a part or certain components. (

P.30)

1

Press the

“APPS”

button.

Select

“Maintenance”

.

Select the desired item.

No.

Function

Select to set the condition of parts or components.

Select to add new information items separately from provided ones.

Select to cancel all conditions which have been entered.

Select to reset the item which have expired conditions.

Select to call the registered dealer.

Select to register/edit dealer information. (

P.64)

When set to on, the indicator will illuminate. The system is set to give maintenance information with the

“Maintenance Reminder” screen.

(

P.30)

2

INFORMATION

When the vehicle needs to be serviced, the screen button color will change to orange.

*:Entune Premium Audio only

63

3. OTHER SETTINGS

MAINTENANCE INFORMATION

SETTING

1

Select the desired part or component screen button.

When the vehicle needs to be serviced, the screen button color will change to orange.

2

Set the conditions.

DEALER SETTING

Dealer information can be registered in the system. With dealer information registered, route guidance to the dealer is available.

1

2

Select

“Set Dealer”

.

Select the desired item to search for the location. (

P.244)

No.

Function

Select to enter the next maintenance date.

Select to enter the driving distance until the next maintenance check.

Select to cancel the conditions which have been entered.

Select to reset the conditions which have expired.

3

Select

“OK”

after entering the conditions.

The editing dealer screen appears after setting the location.

INFORMATION

For scheduled maintenance information, refer to “Scheduled Maintenance

Guide”, or “Owner’s Manual Supplement”.

Depending on driving or road conditions, the actual date and distance that maintenance should be performed may differ from the stored date and distance in the system.

64

3. OTHER SETTINGS

3

Select the items to be edited.

No.

Function

Select to enter the name of a dealer.

Select to enter the name of a dealer member.

Select to set the location.

Select to enter the phone number.

Select to delete the dealer information displayed on the screen.

Select to set the displayed dealer as a destination.

Page

65

65

65

65

257

EDITING DEALER OR CONTACT

NAME

1

Select

“Edit”

next to “Dealer” or “Contact”.

2

Enter the name and select

“OK”

.

EDITING THE LOCATION

1

Select

“Edit”

next to “Location”.

2

Scroll the map to the desired point

(

P.236) and select

“OK”

.

EDITING PHONE NUMBER

1

Select

“Edit”

next to “Phone #”.

2

Enter the phone number and select

“OK”

.

2

65

3. OTHER SETTINGS

66

3

AUDIO SYSTEM

2

1

BASIC OPERATION

2

RADIO OPERATION

3

1. QUICK REFERENCE ..................... 70

2. SOME BASICS .............................. 72

TURNING THE SYSTEM ON

AND OFF ............................................ 72

SELECTING AN AUDIO SOURCE ....... 73

DISC SLOT............................................ 74

USB/AUX PORT .................................... 74

SOUND SETTINGS............................... 75

VOICE COMMAND SYSTEM................ 76

1. AM/FM RADIO...................................... 77

OVERVIEW............................................ 77

PRESETTING A STATION .................... 80

SELECTING A STATION FROM

THE LIST............................................. 80

CACHING A RADIO PROGRAM

(ENTUNE PREMIUM

AUDIO ONLY) ..................................... 81

RADIO BROADCAST DATA

SYSTEM.............................................. 82

TRAFFIC ANNOUNCEMENT

(FM RADIO) ........................................ 83

USING HD Radio™ TECHNOLOGY ..... 83

AVAILABLE HD Radio™

TECHNOLOGY ................................... 84

TROUBLESHOOTING GUIDE .............. 86

4

5

6

7

8

9

2. XM Satellite Radio........................ 87

OVERVIEW............................................ 87

HOW TO SUBSCRIBE TO

XM Satellite Radio ............................... 89

DISPLAYING THE RADIO ID ................ 91

PRESETTING A CHANNEL .................. 91

SELECTING A CHANNEL FROM

THE LIST............................................. 91

IF THE SATELLITE RADIO TUNER

MALFUNCTIONS ................................ 92

3. INTERNET RADIO ........................ 93

LISTENING TO INTERNET RADIO....... 93

1

67

3

MEDIA OPERATION

4

AUDIO REMOTE CONTROLS

1. CD................................................... 94

OVERVIEW............................................ 94

PLAYING AN AUDIO CD....................... 96

PLAYING AN MP3/WMA/AAC DISC ..... 96

2. USB MEMORY ............................... 97

OVERVIEW............................................ 97

PLAYING A USB AUDIO ..................... 100

3. iPod .............................................. 101

OVERVIEW.......................................... 101

PLAYING AN iPod ............................... 104

4. Bluetooth

®

AUDIO ...................... 105

OVERVIEW.......................................... 105

CONNECTING A Bluetooth

®

DEVICE ............................................. 108

LISTENING TO Bluetooth

®

AUDIO ..... 108

5. AUX ................................................. 109

OVERVIEW.......................................... 109

1. STEERING SWITCHES............... 111

5

1. AUDIO SETTINGS....................... 112

“Audio Settings” SCREEN.................... 112

6

SETUP

TIPS FOR OPERATING

THE AUDIO SYSTEM

1. OPERATING INFORMATION ..... 114

RADIO .................................................. 114

CD PLAYER AND DISC....................... 115

iPod ...................................................... 117

FILE INFORMATION............................ 118

TERMS................................................. 121

ERROR MESSAGES ........................... 122

68

3

1

AUDIO SYSTEM

2

7

REAR SEAT ENTERTAINMENT

SYSTEM OPERATION

1. REAR SEAT ENTERTAINMENT

SYSTEM FEATURES ................ 123

DISPLAY ............................................. 124

DISC SLOT.......................................... 125

SD CARD SLOT .................................. 126

REMOTE CONTROLLER.................... 126

HEADPHONE JACKS ......................... 130

OPERATING FROM

THE FRONT SEATS......................... 130

DISCS THAT CAN BE USED .............. 131

SD CARD THAT CAN BE USED......... 133

COPYRIGHTS AND

TRADEMARKS ................................. 133

2. PLAYING A Blu-ray Disc™ (BD)

AND DVD DISCS ....................... 136

REMOTE CONTROLLER.................... 136

TURNING ON THE BD/DVD MODE ... 137

PLAYING/PAUSING A DISC ............... 137

OPERATING THE DISC MENU .......... 137

OPTION SCREEN ............................... 137

BD/DVD VIDEO DISCS ....................... 146

3. PLAYING AN AUDIO CD AND

MP3/WMA DISCS ..................... 149

REMOTE CONTROLLER .................... 149

CONTROL SCREEN ........................... 149

TURNING ON THE AUDIO CD

AND MP3/WMA MODE ..................... 149

SELECTING A TRACK/FILE ............... 149

FAST FORWARDING OR

REWINDING A TRACK/FILE ............ 149

SELECTING A FOLDER...................... 150

REPEAT PLAY .................................... 150

RANDOM PLAYBACK ......................... 150

MP3 AND WMA FILES ........................ 150

3

4

5

6

7

4. PLAYING AN SD CARD ............. 152

REMOTE CONTROLLER .................... 152

MAIN MENU ........................................ 152

PLAYING STILL PICTURES................ 153

PLAYING AVCHD VIDEO.................... 154

FORMATTING THE SD CARD ............ 155

DELETING THE BD

HISTORY DATA ................................ 155

SD CARD INFORMATION................... 155

8

9

5. USING THE VIDEO MODE ......... 157

REMOTE CONTROLLER .................... 157

USING THE A/V INPUT PORT ............ 157

69

1. BASIC OPERATION

1. QUICK REFERENCE

Press the

“AUDIO”

button to display the audio screen.

Entune Premium Audio

Entune Audio Plus

70

Function

Using the radio

Playing an audio CD or MP3/WMA/AAC disc

Playing a USB memory

Playing an iPod

®

Playing a Bluetooth

®

device

Using the AUX port

Using the steering wheel audio switches

Audio system settings

Rear seat entertainment system

1. BASIC OPERATION

Page

77

94

97

101

105

109

111

112

123

3

71

1. BASIC OPERATION

2. SOME BASICS

This section describes some of the basic features of the audio system. Some information may not pertain to your system.

Your audio system works when the engine switch is turned to “ACC” or “ON” position.

TURNING THE SYSTEM ON

AND OFF

NOTICE

To prevent the battery from being discharged, do not leave the audio system on longer than necessary when the engine is not running.

CERTIFICATION

CAUTION: THIS PRODUCT IS A

CLASS I LASER PRODUCT. USE OF

CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED

HEREIN MAY RESULT IN HAZARD-

OUS RADIATION EXPOSURE. DO

NOT OPEN COVERS AND DO NOT

REPAIR BY YOURSELF. REFER

SERVICING TO QUALIFIED PER-

SONNEL.

“PWR·VOL”

knob: Press to turn the audio system on and off. The system turns on in the last mode used. Turn this knob to adjust the volume.

“AUDIO”

button: Press to display screen buttons for the audio system.

A function that enables automatic return to the “Home” screen from the audio screen can be selected. (

P.54)

72

SELECTING AN AUDIO

SOURCE

1

Press the

“AUDIO”

button.

1. BASIC OPERATION

REORDERING THE AUDIO

SOURCE

1

Select

“Reorder”

.

3

2

Select

“Source”

on the audio screen or press

“AUDIO”

button again.

3

Select the desired source.

2

Select the desired audio source then

or to reorder.

3

Select

“OK”

.

INFORMATION

Dimmed screen buttons cannot be operated.

When there are two pages, select

to change the page.

or

73

1. BASIC OPERATION

DISC SLOT

INSERTING A DISC

1

Insert a disc into the disc slot.

USB/AUX PORT

1

Open the cover and connect a device.

After insertion, the disc is automatically loaded.

Turn on the power, if applicable, of the device if it is not turned on.

INFORMATION

The AUX port only supports audio input.

EJECTING A DISC

1

Press the disc.

button and remove the

NOTICE

Never try to disassemble or oil any part of the CD player. Do not insert anything other than a disc into the slot.

INFORMATION

The player is intended for use with 4.7

in. (12 cm) discs only.

When inserting a disc, gently insert the disc with the label facing up.

74

1. BASIC OPERATION

SOUND SETTINGS

TONE AND BALANCE

TONE:

How good an audio program sounds is largely determined by the mix of the treble, mid and bass levels. In fact, different kinds of music and vocal programs usually sound better with different mixes of treble, mid and bass.

BALANCE:

A good balance of the left and right stereo channels and of the front and rear sound levels is also important.

Keep in mind that when listening to a stereo recording or broadcast, changing the right/left balance will increase the volume of 1 group of sounds while decreasing the volume of another.

1

Select

“Sound”

on the audio control screen.

2

Select the desired screen button.

No.

Function

Select

“+”

or

“-”

to adjust highpitched tones.

Select

“+”

or

“-”

to adjust midpitched tones.

Select

“+”

or

“-”

to adjust lowpitched tones.

Select to adjust the sound balance between the front and rear speakers.

Select to adjust the sound balance between the left and right speakers.

3

75

1. BASIC OPERATION

VOICE COMMAND SYSTEM

1

Press this switch to operate the voice command system.

The voice command system and its list of commands can be operated.

(

P.160)

76

2. RADIO OPERATION

1. AM/FM RADIO

OVERVIEW

Select

“AM”

or

“FM”

on the “Select Audio Source” screen. (

P.73)

CONTROL SCREEN

Entune Premium Audio

Top screen

Option screen

3

77

2. RADIO OPERATION

Entune Audio Plus

Top screen

Option screen

CONTROL PANEL

78

2. RADIO OPERATION

No.

Function

Select to scroll the page of preset buttons.

Select to display the option screen.

Select to display the audio source selection screen.

Select to display the cache radio operation buttons. (

P.81)

Select to display the sound setting screen.

Cache radio only: Select to play/pause.

Select to display a list of receivable stations/channels.

Select to store information of the audio currently being broadcast on the radio.

Select to tune to preset stations/channels.

Select to display the additional text information.

Select to scan for receivable stations/channels.

Select to turn HD Radio mode on/off.

When the

“HD Radio”

indicator is off, the station list shows only analog broadcasts.

Analog FM only: Select to display RBDS text messages.

Turn to step up/down frequencies.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to select a preset station.

Press and hold to seek for a station.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

3

INFORMATION

The radio automatically changes to stereo reception when a stereo broadcast is received.

The radio automatically blends to an HD Radio signal in AM or FM where available.

79

2. RADIO OPERATION

PRESETTING A STATION

Radio mode has a mix preset function, which can store up to 36 stations (6 stations per page x 6 pages) from any of the AM, FM or SAT bands.

1

2

Tune in the desired station.

Select

“(add new)”

.

SELECTING A STATION

FROM THE LIST

A station list can be displayed.

1

2

Select

“Station List”

.

FM radio only: Select the desired program genre.

To change the preset station to a different one, select and hold the preset station.

3

Select screen.

“Yes”

on the confirmation

4

Select

“OK”

after setting the new preset station.

3

Select the desired station and select

“OK”

.

INFORMATION

The number of preset radio stations displayed on the screen can be changed.

(

P.113)

80

2. RADIO OPERATION

REFRESHING THE STATION LIST

1

Select

“Refresh”

on the “Station List” screen and the following screen will be displayed.

CACHING A RADIO

PROGRAM (ENTUNE

PREMIUM AUDIO ONLY)

A radio program can be cached and played back in a time-shifted manner.

3

“Cancel Refresh”

: Select to cancel the refresh.

“Source”

: Select to change to another audio source while refreshing.

PLAYING BACK THE CACHE

MANUALLY

The broadcast cached in the program cache can be played back manually.

1

Select the desired cache radio operation button.

INFORMATION

AM/FM sound is muted during refresh operation.

In some situations, it may take some time to update the station list.

No.

Function

Hides the cache operation buttons

Skips backward 2 minutes

Select and hold: Fast rewinds continuously

Returns to the live radio broadcast

Select and hold: Fast forwards continuously

Skips forward 2 minutes

Red bar: Shows what portion of the cached broadcast is currently playing

Light blue bar: Shows time in which cache writing is in progress

81

2. RADIO OPERATION

AUTOMATIC PLAYBACK OF

THE CACHE

If the radio broadcast is interrupted by another audio output, such as an incoming phone call, the system will automatically cache the interrupted portion and perform time-shift playback when the interruption ends.

To manually operate the cache operation: (

P.81)

INFORMATION

The system can store up to 20 minutes.

Cached data will be erased when the radio mode or station is changed or when the audio system is turned off.

If noise or silence occurs during the caching process, cache writing will continue, with the noise or silence recorded as is. In this case, the cached broadcast will contain the noise or silence when played back.

RADIO BROADCAST DATA

SYSTEM

This audio system is equipped with Radio Broadcast Data Systems (RBDS).

RBDS mode allows text messages to be received from radio stations that utilize RBDS transmitters.

When RBDS is on, the radio can

— only select stations of a particular program type,

— display messages from radio stations,

— search for a stronger signal station.

RBDS features are available only when listening to an FM station that broadcasts RBDS information and the

“FM Info”

indicator is on.

SELECTING A DESIRED

GENRE

1

Select

“Station List”

.

2

FM radio only: Select a desired genre of station and select a desired station.

The genre list is in the following order:

• Classical

• Country

• EasyLis (Easy Listening)

• Inform (Information)

• Jazz

• News

• Oldies

• Other

• Pop Music

• Religion

• Rock

• R&B (Rhythm and Blues)

• Sports

• Talk

• Traffic (Not available when “HD Radio” indicator is off.)

• Alert (Emergency Alert)

82

2. RADIO OPERATION

TRAFFIC ANNOUNCEMENT

(FM RADIO)

A station that regularly broadcasts traffic information is automatically located.

1

2

Select

“Station List”

.

Select the desired traffic program station.

INFORMATION

If a traffic program station is found, the name of the traffic program station will be displayed for a while.

USING HD Radio™

TECHNOLOGY

HD Radio™ Technology is the digital evolution of analog AM/FM radio. Your radio product has a special receiver which allows it to receive digital broadcasts (where available) in addition to the analog broadcasts it already receives. Digital broadcasts have better sound quality than analog broadcasts as digital broadcasts provide free, crystal clear audio with no static or distortion. For more information, and a guide to available radio stations and programming, refer to www.hdradio.com.

3

HD Radio Technology manufactured under license from iBiquity Digital

Corporation. U.S. and Foreign

Patents. HD Radio™ and the HD, HD

Radio, and “Arc” logos are proprietary trademarks of iBiquity Digital Corp.

83

2. RADIO OPERATION

AVAILABLE HD Radio™

TECHNOLOGY

MULTICAST

On the FM radio frequency most digital stations have “multiple” or supplemental programs on one FM station.

1

Select

“HD)”

logo.

PRESERVING WITH MUSIC

INFORMATION

Tag information in the music broadcasting is preserved in the system can be transferred to an iPod.

1

Select

“Tag”

to bookmark the music information.

2

Select the desired channel.

Turning the

“TUNE·SCROLL”

knob can also select the desired multicast channel.

2

Connect an iPod. (

P.74)

Turn on the power of the iPod if it is not turned on.

Once an iPod is connected, the music tag moves from the radio into the iPod.

When the iPod is connected to iTunes, the

“tagged” information of the songs which were tagged while listening to the radio can be viewed with an option to purchase.

84

INFORMATION

The tag information cannot be preserved while scanning or caching the radio station.

If tagging the music information fails,

“Saving the HD Radio tag was unsuccessful.” will be displayed on the screen.

If this occurs, tag the information again.

HD Radio™ stations can saved as presets.

An orange “HD)” logo indicator will be displayed on the screen when in digital.

The “HD)” logo will first appear in a gray color indicating the station is indeed (an analog and) a digital station. Once the digital signal is acquired, the logo will change to a bright orange color.

The song title, artist name and music genre will appear on the screen when available by the radio station. The radio station can send album pictures when available with HD is available.

As a user works through the analog radio stations, (where applicable) the radio receiver will automatically tune from an analog signal to a digital signal within 5 seconds.

2. RADIO OPERATION

3

85

2. RADIO OPERATION

TROUBLESHOOTING GUIDE

Experience

Mismatch of time alignment- a user may hear a short period of programming replayed or an echo, stutter or skip.

Cause Action

The radio stations analog and digital volume is not properly aligned or the station is in ballgame mode.

None, radio broadcast issue. A user can contact the radio station.

Sound fades, blending in and out.

Audio mute condition when an HD2/HD3 multicast channel had been playing.

Audio mute delay when selecting an HD2/HD3 multicast channel preset.

Text information does not match the present song audio.

No text information shown for the present selected frequency.

Radio is shifting between analog and digital audio.

The radio does not have access to digital signals at the moment.

Reception issue, may clear-up as the vehicle continues to be driven.

Turning the indicator of the “HD

Radio” button off can force radio in an analog audio.

This is normal behavior, wait until the digital signal returns. If out of the coverage area, seek a new station.

The digital multicast content is not available until

HD Radio™ broadcast can be decoded and make the audio available. This takes up to 7 seconds.

This is normal behavior, wait for the audio to become available.

Data service issue by the radio broadcaster.

Data service issue by the radio broadcaster.

Broadcaster should be notified.

Complete the form; www.ibiquity.com/automotive/report_radio_station_experiences.

Broadcaster should be notified.

Complete the form; www.ibiquity.com/automotive/report_radio_station_experiences.

86

2. RADIO OPERATION

2. XM Satellite Radio*

OVERVIEW

Select

“XM”

on the “Select Audio Source” screen. (

P.73)

CONTROL SCREEN

3

CONTROL PANEL

*: If equipped

87

2. RADIO OPERATION

No.

Function

Select to scroll the page of preset buttons.

Select to display the option screen.

Select to scan for receivable channels.

Select “Additional Information” to display the information.

Select to display the “Select Audio Source” screen.

Select to display the sound setting screen.

Select to display a list of receivable channels.

Select to tune to preset stations/channels.

Turn to step up/down channels.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to seek for a channel.

Press and hold to seek continuously.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the audio system.

88

2. RADIO OPERATION

HOW TO SUBSCRIBE TO XM

Satellite Radio

To listen to a satellite radio broadcast in the vehicle, a subscription to the XM

Satellite Radio service is necessary.

An XM Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous U.S. states and some Canadian provinces.

HOW TO SUBSCRIBE

It is necessary to enter into a separate service agreement with XM Satellite

Radio in order to receive satellite broadcast programming in the vehicle.

Additional activation and service subscription fees apply that are not included in the purchase price of the vehicle and digital satellite tuner.

For complete information on subscription rates and terms, or to subscribe to

XM Satellite Radio:

U.S.A.

Refer to www.siriusxm.com or call

1-877-447-0011.

Canada

Refer to www.siriusxm.ca or call

1-877-209-0079.

NOTICE

XM Radio Services

Legal Disclaimers and Warnings

• Fees and Taxes

Subscription fee, taxes, one time activation fee, and other fees may apply. Subscription fee is consumer only. All fees and programming subject to change.

Subscriptions subject to Customer

Agreement available at www.siriusxm.com. (U.S.A.) or www.siriusxm.ca (Canada) XM service only available in the 48 contiguous

United States and Canada.

Explicit Language Notice

Channels with frequent explicit language are indicated with an “XL” preceding the channel name. Channel blocking is available for XM Satellite Radio receivers by notifying XM at;

U.S.A. Customers:

Visit www.siriusxm.com or calling

1-877-447-0011

Canadian Customers:

Visit www.siriusxm.ca or calling

1-877-209-0079

It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any technology or software incorporated in receivers compatible with the XM Satellite Radio System or that support the XM website, the Online Service or any of its content. Furthermore, the AMBE

®

voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice

Systems, Inc.

Note: this applies to XM receivers only and not XM Ready devices.

3

89

2. RADIO OPERATION

INFORMATION

XM Radio Services

Descriptions

• Radio and Entertainment

XM offers more than 170 satellite radio channels of commercial-free music and premier sports, news, talk, and entertainment. XM is broadcast via satellites to millions of listeners across the continental United States. XM subscribers listen to XM on satellite radio receivers for the car, home, and portable use. More information about XM is available online at www.siriusxm.com

(U.S.A.) or www.siriusxm.ca (Canada).

XM Radio Services

Subscription

Instructions

• For XM Services requiring a subscription (such as XM Radio, and some

Infotainment & data services), the following paragraph shall be included.

Required XM Radio and some Infotainment & data services monthly subscriptions sold separately after trial period. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions are subject to the Customer Agreement available at www.siriusxm.com. XM service only available in the 48 contiguous United

States.

2011 Sirius XM Radio Inc.

Sirius, XM and all related marks and logos are trademarks of Sirius XM

Radio Inc. All other marks, channel names and logos are the property of their respective owners.

For more information, program schedules, and to subscribe or extend subscription after complimentary trial period; more information is available at:

USA Customers:

Visit www.siriusxm.com or call

1-877-447-0011

INFORMATION

XM Satellite Radio is solely responsible for the quality, availability and content of the satellite radio services provided, which are subject to the terms and conditions of the XM Satellite Radio customer service agreement.

Customers should have their radio ID ready; the radio ID can be found by tuning to “Ch 000” on the radio. For details, see “DISPLAYING THE RADIO ID” below.

All fees and programming are the responsibility of XM Satellite Radio and are subject to change.

SATELLITE TUNER

TECHNOLOGY NOTICE

Toyota’s satellite radio tuners are awarded Type Approval Certificates from XM Satellite Radio Inc. as proof of compatibility with the services offered by XM Satellite Radio.

INFORMATION

Satellite tuner

The tuner supports only Audio Services

(Music and Talk) and the accompanying

Text Information of XM

®

Satellite Radio.

90

2. RADIO OPERATION

DISPLAYING THE RADIO ID

Each XM tuner is identified with a unique radio ID. The radio ID is required when activating an XM service or when reporting a problem.

If “Ch 000” is selected using the

“TUNE·SCROLL”

knob, the ID code, which is 8 alphanumeric characters, will be displayed. If another channel is selected, the ID code will no longer be displayed. The channel (000) alternates between displaying the radio ID and the specific radio code.

SELECTING A CHANNEL

FROM THE LIST

1

2

3

Select

“Channel List”

.

Select the desired program genre.

Select the desired channel and select

“OK”

.

3

PRESETTING A CHANNEL

1

2

Tune in the desired channel.

Select

“(add new)”

.

To change the preset channel to a different one, select and hold the preset station/ channel.

3

Select screen.

“Yes”

on the confirmation

4

Select

“OK”

after setting the new preset channel.

91

2. RADIO OPERATION

IF THE SATELLITE RADIO TUNER MALFUNCTIONS

When problems occur with the XM tuner, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action.

Message

“Check Antenna”

“Ch Unauthorized”

“No Signal”

“Loading”

“Channel Off Air”

-----

“Chan Unavailable”

Explanation

The XM antenna is not connected. Check whether the XM antenna cable is attached securely.

A short circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer for assistance.

You have not subscribed to XM Satellite Radio. The radio is being updated with the latest encryption code. Contact XM Satellite Radio for subscription information. When a contract is canceled, you can choose “Ch 000” and all free-to-air channels.

The premium channel you selected is not authorized. Wait for about

2 seconds until the radio returns to the previous channel or “Ch 001”.

If it does not change automatically, select another channel. To listen to the premium channel, contact XM Satellite Radio.

The XM signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal.

The unit is acquiring audio or program information. Wait until the unit has received the information.

The channel you selected is not broadcasting any programming. Select another channel.

There is no song/program title or artist name/feature associated with the channel at that time. No action is required.

The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “Ch 001”.

If it does not change automatically, select another channel.

INFORMATION

Contact the XM Listener Care Center at 1-877-447-0011 (U.S.A.) or 1-877-209-0079

(Canada).

92

2. RADIO OPERATION

3. INTERNET RADIO*

LISTENING TO INTERNET

RADIO

One of Entune App Suite features is the ability to listen to internet radio. In order to use this service, a compatible phone and the system need to be set up. For details:

P.301

1

Press the

“APPS”

button.

INFORMATION

Other applications can be activated while listening to internet radio.

Some parts of applications can be adjusted using the switches on the steering wheel.

For additional information, refer to http://www.toyota.com/entune/ or call

1-800-331-4331.

3

2

Select the internet radio application.

The internet radio application screen is displayed.

Perform operations according to the displayed application screen.

If a compatible phone is already registered, it will be connected automatically.

*: Entune Premium Audio only

93

3. MEDIA OPERATION

1. CD

OVERVIEW

The CD operation screen can be reached by the following methods:

Insert a disc (

P.74)

Select

“CD”

on the “Select Audio Source” screen. (

P.73)

CONTROL SCREEN

94

CONTROL PANEL

3. MEDIA OPERATION

No.

Function

Displays cover art

Select to display a track/file list.

Select to display the “Select Audio Source” screen.

Select to display the sound setting screen.

Select to play/pause.

Shows progress

Select to set repeat playback.

Select to set random playback.

Audio CD: Select to display a track list.

MP3/WMA/AAC disc: Select to display a folder list.

To return to the top screen, select

“Now Playing”

on the list screen.

Disc slot

Turn to select a track/file.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to select a track/file.

Press and hold to fast forward/rewind.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

Press to eject a disc.

3

INFORMATION

If a disc contains CD-DA files and MP3/WMA/AAC files, only the CD-DA files can be played back.

If a CD-TEXT disc is inserted, the title of the disc and track will be displayed. Up to 32 characters can be displayed.

If the disc contains no CD-TEXT, only the track number would be displayed on the screen.

95

3. MEDIA OPERATION

PLAYING AN AUDIO CD PLAYING AN MP3/WMA/AAC

DISC

REPEATING

The track currently being listened to can be repeated.

1

Select the repeat button to change on/ off.

REPEATING

The file or folder currently being listened to can be repeated.

1

Select the repeat button to change on/ off.

RANDOM ORDER

Tracks can be automatically and randomly selected.

1

Select the random button to change on/off.

RANDOM ORDER

Files or folders can be automatically and randomly selected.

1

Select the random button to change on/off.

96

3. MEDIA OPERATION

2. USB MEMORY

OVERVIEW

The USB memory operation screen can be reached by the following methods:

Connect a USB memory (

P.74)

Select

“USB”

on the “Select Audio Source” screen. (

P.73)

CONTROL SCREEN

3

CONTROL PANEL

97

3. MEDIA OPERATION

No.

Function

Select to display the “Select Audio Source” screen.

Select to display the sound setting screen.

Select to play/pause.

Shows progress

Select to set repeat playback.

Select to set random playback.

Select to display the play mode selection screen.

To return to the top screen, select

“Now Playing”

on the list screen.

Displays cover art.

Select to display file/track list.

Turn to select a track/file.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to select a track/file.

Press and hold to fast forward/rewind.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

98

3. MEDIA OPERATION

WARNING

Do not operate the player’s controls or connect the USB memory while driving.

NOTICE

Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player.

Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal.

Do not insert foreign objects into the port as this may damage the portable player or its terminal.

3

INFORMATION

If tag information exists, the file names will be changed to track names.

99

3. MEDIA OPERATION

PLAYING A USB AUDIO

REPEATING

The file/track or folder/album currently being listened to can be repeated.

1

Select the repeat button to change on/ off.

RANDOM ORDER

Files/tracks or folders/albums can be automatically and randomly selected.

1

Select the random button to change on/off.

100

3. MEDIA OPERATION

3. iPod

OVERVIEW

The iPod operation screen can be reached by the following methods:

Connect an iPod (

P.74)

Select

“iPod”

on the “Select Audio Source” screen. (

P.73)

When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen.

CONTROL SCREEN

3

101

3. MEDIA OPERATION

CONTROL PANEL

No.

Function

Displays cover art

Select to display a track list.

To return to the top screen, select

“Now Playing”

on the list screen.

Select to display the “Select Audio Source” screen.

Shows progress

Select to display the sound setting screen.

Select to play/pause.

Select to set repeat playback.

Select to set random playback.

Select to display the play mode selection screen.

To return to the top screen, select

“Now Playing”

on the list screen.

Turn to select a track.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to select a track.

Press and hold to fast forward/rewind.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

102

3. MEDIA OPERATION

WARNING

Do not operate the player’s controls or connect the iPod while driving.

NOTICE

Do not leave your portable player in the car. In particular, high temperatures inside the vehicle may damage the portable player.

Do not push down on or apply unnecessary pressure to the portable player while it is connected as this may damage the portable player or its terminal.

Do not insert foreign objects into the port as this may damage the portable player or its terminal.

3

INFORMATION

When an iPod is connected using a genuine iPod cable, the iPod starts charging its battery.

The multimedia system supports up to 9999 songs from one device. If the device has more than 10000 songs, only the first 9999 will be displayed or played. The first 9999 songs are determined by the device.

Depending on the iPod and the songs in the iPod, iPod cover art may be displayed. This function can be changed to on/off. (

P.112) It may take time to display iPod cover art,

and the iPod may not be operated while the cover art display is in process.

When an iPod is connected and the audio source is changed to iPod mode, the iPod will resume playing from the same point it was last used.

Depending on the iPod that is connected to the system, certain functions may not be available.

If an iPhone is connected via Bluetooth

®

and USB at the same time, system operation may become unstable.

For known phone compatibility information, refer to http://www.toyota.com/entune/.

103

3. MEDIA OPERATION

PLAYING AN iPod

REPEATING

The track currently being listened to can be repeated.

1

Select the repeat button to change on/ off.

RANDOM ORDER

Tracks can be automatically and randomly selected.

1

Select the shuffle button to change on/ off.

104

3. MEDIA OPERATION

4. Bluetooth

®

AUDIO

The Bluetooth

®

audio system enables users to enjoy listening to music that is played on a portable player on the vehicle speakers via wireless communication.

This audio system supports Bluetooth

®

, a wireless data system capable of playing portable audio music without cables. If your device does not support Bluetooth

®

, the Bluetooth

®

audio system will not function.

3

OVERVIEW

Select

“ Audio”

on the “Select Audio Source” screen. (

P.73)

Depending on the type of portable player connected, some functions may not be available and/or the screen may look differently than shown in this manual.

CONTROL SCREEN

105

3. MEDIA OPERATION

CONTROL PANEL

No.

Function

Select to display the “Select Audio Source” screen.

Displays Bluetooth

®

device condition.

Shows progress

Select to display the sound settings screen.

Select to play/pause.

Select to set repeat playback.

Select to set random playback.

Select to display the play mode selection screen.

To return to the top screen, select

“Now Playing”

on the list screen.

Select to display the portable device connection screen.

Displays cover art.

Select to display a track list.

Turn to select a track.

Turn to move up/down the list. Also, the knob can be used to enter selections on the list screens by pressing it.

Press to select a track.

Press and hold to fast forward/rewind.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

106

3. MEDIA OPERATION

WARNING

Do not operate the player’s controls or connect to the Bluetooth

®

audio system while driving.

Your audio unit is fitted with Bluetooth

®

antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth

®

antennas. The radio waves may affect the operation of such devices.

Before using Bluetooth

®

devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

3

NOTICE

Do not leave your portable player in the vehicle. In particular, high temperatures inside the vehicle may damage the portable player.

INFORMATION

Depending on the Bluetooth

®

device that is connected to the system, the music may start playing when selecting while it is paused. Conversely, the music may pause when selecting while it is playing.

In the following conditions, the system may not function:

• The Bluetooth

®

device is turned off.

• The Bluetooth

®

device is not connected.

• The Bluetooth

®

device has a low battery.

It may take time to connect the phone when Bluetooth

®

audio is being played.

For operating the portable player, see the instruction manual that comes with it.

If the Bluetooth

®

device is disconnected due to poor reception from the Bluetooth

®

network when the engine switch is turned to the “ACC” or “ON” position, the system automatically reconnects the portable player.

If the system is attempting to connect to a Bluetooth

®

device and the Bluetooth

®

device is turned off and then back on, the system will attempt to reconnect.

Bluetooth

®

device information is registered when the Bluetooth

®

device is connected to the Bluetooth

®

audio system. When selling or disposing of the vehicle, remove the

Bluetooth

®

audio information from the system. (

P.58)

107

3. MEDIA OPERATION

CONNECTING A Bluetooth

®

DEVICE

LISTENING TO Bluetooth

®

AUDIO

To use the Bluetooth

®

audio system, it is necessary to register a Bluetooth

® device with the system.

Registering an additional device

1

Select

“Select Device”

on the

Bluetooth

®

audio control screen.

2

For more information:

P.48

Selecting a registered device

1

2

Select

“Select Device”

on the

Bluetooth

®

audio control screen.

For more information:

P.49

REPEATING

The track or album currently being listened to can be repeated.

1

Select the repeat button to change on/ off.

RANDOM ORDER

Tracks or albums can be automatically and randomly selected.

1

Select the random button to change on/off.

108

3. MEDIA OPERATION

5. AUX

OVERVIEW

Select

“AUX”

on the “Select Audio Source” screen. (

P.73)

CONTROL SCREEN

3

CONTROL PANEL

109

3. MEDIA OPERATION

No.

Function

Select to display the “Select Audio Source” screen.

Select to display the sound setting screen.

Turn to adjust volume.

Press to turn the audio system on/off.

Press and hold to restart the system.

WARNING

Do not connect portable audio device or operate the controls while driving.

NOTICE

Do not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.

Do not push down on or apply unnecessary pressure to the portable audio device while it is connected as this may damage the portable audio device or its terminal.

Do not insert foreign objects into the port as this may damage the portable audio device or its terminal.

110

4. AUDIO REMOTE CONTROLS

1. STEERING SWITCHES

Some parts of the audio system can be adjusted using the switches on the steering wheel.

No.

Switch

Volume control switch

“ ” switch

“MODE/HOLD” switch

Volume control switch

Press the

“+”

side to increase the volume.

The volume continues to increase while the switch is being pressed.

Press the

“-”

side to decrease the volume. The volume continues to decrease while the switch is being pressed.

“ ” switch

When in radio mode

Press the

“ ”

or

“ ”

switch to change the station/channel up or down.

Press and hold the

“ ”

or

“ ”

switch to quickly change the station/channel.

Press and hold the

“ ”

or

“ ”

switch to type seek up or down. (XM Satelite Radio)

When in media mode

Press the

“ ”

or

“ ”

switch to skip to the next or previous track/file.

Press and hold the

“ ”

or

“ ”

switch to fast forward/rewind.

“MODE/HOLD”

switch

Press the

“MODE/HOLD”

switch to select an audio mode. Each press changes the mode sequentially if the desired mode is ready to use.

To turn the audio system on, press the

“MODE/HOLD”

switch.

Press and hold the

“MODE/HOLD”

switch to turn the audio system off.

3

111

5. SETUP

1. AUDIO SETTINGS

Detailed audio settings can be programmed.

1

Press the

“APPS”

button.

“Audio Settings” SCREEN

2

3

4

Select

“Setup”

.

Select

“Audio”

.

Select the items to be set.

No.

Function

Select to change the number of preset radio stations displayed on the screen.

Select to set cover art settings.

Select to set automatic sound levelizer.

*

1

Select to set the surround function on/off.

*

2

Select to enable cache radio.

*

1

: If equipped

*

2

: Entune Premium Audio only

Page

113

113

112

SETTING THE NUMBER OF

RADIO PRESETS

2

3

1

Display the “Audio Settings” screen.

(

P.112)

Select

“Number of Radio Presets”

.

Select the button with the desired number to be displayed.

AUTOMATIC SOUND

LEVELIZER (ASL)

The system adjusts to the optimum volume and tone quality according to vehicle speed to compensate for increased vehicle noise.

1

2

Display the “Audio Settings” screen.

(

P.112)

Select the

“Automatic Sound Levelizer”

.

3

Select the

“High”

,

“Mid”

,

“Low”

, or

“Off”

.

Entune Premium JBL Audio

3

Select on/off.

5. SETUP

3

113

6. TIPS FOR OPERATING THE AUDIO SYSTEM

1. OPERATING INFORMATION

NOTICE

To avoid damage to the audio system:

• Be careful not to spill beverages over the audio system.

• Do not put anything other than an appropriate disc into the disc slot.

INFORMATION

The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the audio system which you are listening to. However, this does not indicate a malfunction.

RADIO

Usually, a problem with radio reception does not mean there is a problem with the radio — it is just the normal result of conditions outside the vehicle.

For example, nearby buildings and terrain can interfere with FM reception.

Power lines or phone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther the vehicle is from a station, the weaker its signal will be. In addition, reception conditions change constantly as the vehicle moves.

Here, some common reception problems that probably do not indicate a problem with the radio are described.

FM

Fading and drifting stations: Generally, the effective range of FM is about 25 miles (40 km). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmitter.

They are often accompanied by distortion.

Multi-path: FM signals are reflective, making it possible for 2 signals to reach the vehicle’s antenna at the same time. If this happens, the signals will cancel each other out, causing a momentary flutter or loss of reception.

Static and fluttering: These occur when signals are blocked by buildings, trees or other large objects. Increasing the bass level may reduce static and fluttering.

Station swapping: If the FM signal being listened to is interrupted or weakened, and there is another strong station nearby on the FM band, the radio may tune in the second station until the original signal can be picked up again.

AM

Fading: AM broadcasts are reflected by the upper atmosphere — especially at night. These reflected signals can interfere with those received directly from the radio station, causing the radio station to sound alternately strong and weak.

Station interference: When a reflected signal and a signal received directly from a radio station are very nearly the same frequency, they can interfere with each other, making it difficult to hear the broadcast.

Static: AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening or electrical motors. This results in static.

114

6. TIPS FOR OPERATING THE AUDIO SYSTEM

XM

Cargo loaded on the roof luggage carrier, especially metal objects, may adversely affect the reception of XM Satellite Radio.

Alternation or modifications carried out without appropriate authorization may invalidate the user’s right to operate the equipment.

Audio CDs

Use only discs marked as shown above.

The following products may not be playable on your player:

• SACD

• dts CD

• Copy-protected CD

• Video CD

3

CD PLAYER AND DISC

This CD player is intended for use with 4.7

in. (12 cm). discs only.

Extremely high temperatures can keep the

CD player from working. On hot days, use the air conditioning system to cool the inside of the vehicle before using the player.

Bumpy roads or other vibrations may make the CD player skip.

If moisture gets into the CD player, the discs may not be able to be played.

Remove the discs from the player and wait until it dries.

WARNING

CD players use an invisible laser beam which could cause hazardous laser radiation exposure if directed outside the unit. Be sure to operate the player correctly.

115

6. TIPS FOR OPERATING THE AUDIO SYSTEM

Special shaped discs

Transparent/translucent discs

NOTICE

Do not use special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations.

The use of such discs may damage the player, or it may be impossible to eject the disc.

This system is not designed for use of

Dual Discs. Do not use Dual Discs because they may cause damage to the player.

Do not use discs with a protection ring.

The use of such discs may damage the player, or it may be impossible to eject the disc.

Do not use printable discs. The use of such discs may damage the player, or it may be impossible to eject the disc.

Low quality discs

Labeled discs

Correct Wrong

Handle discs carefully, especially when inserting them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side.

Dirt, scratches, warping, pin holes or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.)

Remove discs from the players when not in use. Store them in their plastic cases away from moisture, heat and direct sunlight.

116

6. TIPS FOR OPERATING THE AUDIO SYSTEM

iPod

To clean a disc

: Wipe it with a soft, lintfree cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles).

Dry it with another soft, lint-free cloth. Do not use a conventional record cleaner or anti-static device.

“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

 iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

Lightning is a trademark of Apple Inc.

CD-R/RW DISCS

CD-R/CD-RW discs that have not been subject to the “finalizing process” (a process that allows discs to be played on a conventional CD player) cannot be played.

It may not be possible to play CD-R/CD-

RW discs recorded on a music CD recorder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, condensation, etc. on the lens of the unit.

It may not be possible to play discs recorded on a personal computer depending on the application settings and the environment. Record with the correct format. (For details, contact the appropriate application manufacturers of the applications.)

CD-R/CD-RW discs may be damaged by direct exposure to sunlight, high temperatures or other storage conditions. The unit may be unable to play some damaged discs.

If you insert a CD-RW disc into the player, playback will begin more slowly than with a conventional CD or CD-R disc.

Recordings on CD-R/CD-RW cannot be played using the DDCD (Double Density

CD) system.

117

3

6. TIPS FOR OPERATING THE AUDIO SYSTEM

COMPATIBLE MODELS

The following iPod

®

, iPod nano

®

, iPod classic

®

, iPod touch

®

and iPhone

®

devices can be used with this system.

Made for

• iPod touch (5th generation)

• iPod touch (4th generation)

• iPod touch (3rd generation)

• iPod touch (2nd generation)

• iPod touch (1st generation)

• iPod classic

• iPod with video

• iPod nano (7th generation)

• iPod nano (6th generation)

• iPod nano (5th generation)

• iPod nano (4th generation)

• iPod nano (3rd generation)

• iPhone 6 Plus

• iPhone 6

• iPhone 5S

• iPhone 5C

• iPhone 5

• iPhone 4S

• iPhone 4

• iPhone 3GS

• iPhone 3G

• iPhone

This system only supports audio playback.

Depending on differences between models or software versions etc., some models might be incompatible with this system.

FILE INFORMATION

COMPATIBLE USB DEVICES

USB communication formats

File formats

Correspondence class

USB 2.0 HS (480

Mbps) and FS

(12 Mbps)

FAT 16/32

Mass storage class

COMPATIBLE COMPRESSED

FILES

Item

Compatible file format

Folders in the device

Files in the device

Files per folder

USB

MP3/WMA/AAC

Maximum

3000

Maximum

9999

Maximum

255

DISC

Maximum192

Maximum255

118

6. TIPS FOR OPERATING THE AUDIO SYSTEM

CORRESPONDING SAMPLING

FREQUENCY

File type

MP3 files:

MPEG 1 LAYER 3

MP3 files:

MPEG 2 LSF LAYER 3

WMA files:

Ver. 7, 8, 9 (9.1/9.2)

Frequency (kHz)

32/44.1/48

16/22.05/24

32/44.1/48

AAC files:

MPEG4/AAC-LC

11.025/12/16/

22.05/24/32/

44.1/48

CORRESPONDING BIT RATES

File type

MP3 files:

MPEG 1 LAYER 3

MP3 files:

MPEG 2 LSF LAYER 3

WMA files: Ver. 7, 8

WMA files:

Ver. 9 (9.1/9.2)

AAC files:

MPEG4/AAC-LC

Bit rate (kbps)

32 - 320

8 - 160

CBR 48 - 192

CBR 48 - 320

16 - 320

(Variable Bit Rate (VBR) compatible)

MP3 (MPEG Audio Layer 3), WMA

(Windows Media Audio) and AAC

(Advanced Audio Coding) are audio compression standards.

This system can play MP3/WMA/AAC files on CD-R, CD-RW discs and USB memory.

This system can play disc recordings compatible with ISO 9660 level 1 and level 2 and with the Romeo and Joliet file system.

When naming an MP3/WMA/AAC file, add an appropriate file extension (.mp3/.wma/

.m4a).

This system plays back files with .mp3/

.wma/.m4a file extensions as MP3/WMA/

AAC files respectively. To prevent noise and playback errors, use the appropriate file extension.

This system can play only the first session when using multi-session compatible CDs.

MP3 files are compatible with the ID3 Tag

Ver. 1.0, Ver. 1.1, Ver. 2.2 and Ver. 2.3 formats. This system cannot display disc title, track title and artist name in other formats.

WMA/AAC files can contain a WMA/AAC tag that is used in the same way as an ID3 tag. WMA/AAC tags carry information such as track title and artist name.

The emphasis function is available only when playing MP3/WMA files recorded at

32, 44.1 and 48 kHz.

This system can play back AAC files encoded by iTunes.

The sound quality of MP3/WMA files generally improves with higher bit rates. In order to achieve a reasonable level of sound quality, discs recorded with a bit rate of at least 128 kbps are recommended.

The MP3/WMA player does not play back

MP3/WMA files from discs recorded using packet write data transfer (UDF format).

Discs should be recorded using “pre-mastering” software rather than packet-write software.

M3u playlists are not compatible with the audio player.

MP3i (MP3 interactive) and MP3PRO formats are not compatible with the audio player.

3

119

6. TIPS FOR OPERATING THE AUDIO SYSTEM

The player is compatible with VBR (Variable Bit Rate).

When playing back files recorded as VBR

(Variable Bit Rate) files, the play time will not be correctly displayed if the fast forward or reverse operations are used.

It is not possible to check folders that do not include MP3/WMA/AAC files.

MP3/WMA/AAC files in folders up to 8 levels deep can be played. However, the start of playback may be delayed when using discs containing numerous levels of folders. For this reason, we recommend creating discs with no more than 2 levels of folders.

001.mp3

002.wma

Folder 1

003.mp3

Folder 2

004.mp3

005.wma

Folder 3

006.m4a

The play order of the compact disc with the structure shown above is as follows:

001.mp3

002.wma . . .

006.m4a

The order changes depending on the personal computer and MP3/WMA/AAC encoding software you use.

120

6. TIPS FOR OPERATING THE AUDIO SYSTEM

TERMS

PACKET WRITE

This is a general term that describes the process of writing data on-demand to CD-

R, etc., in the same way that data is written to floppy or hard discs.

ID3 TAG

This is a method of embedding trackrelated information in an MP3 file. This embedded information can include the track number, track title, the artist’s name, the album title, the music genre, the year of production, comments, cover art and other data. The contents can be freely edited using software with ID3 tag editing functions. Although the tags are restricted to a number of characters, the information can be viewed when the track is played back.

MP3

MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organization). MP3 compresses audio data to about 1/10 the size of that on conventional discs.

3

WMA

WMA (Windows Media Audio) is an audio compression format developed by

Microsoft

®

. It compresses files into a size smaller than that of MP3 files. The decoding formats for WMA files are Ver. 7, 8 and

9. This product is protected by certain intellectual property rights of Microsoft

Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary and third parties.

WMA TAG

WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title and artist name.

AAC

AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG2 and

MPEG4.

ISO 9660 FORMAT

This is the international standard for the formatting of CD-ROM folders and files.

For the ISO 9660 format, there are 2 levels of regulations.

Level 1: The file name is in 8.3 format (8 character file names, with a 3 character file extension. File names must be composed of one-byte capital letters and numbers. The “_” symbol may also be included.)

Level 2: The file name can have up to 31 characters (including the separation mark

“.” and file extension). Each folder must contain fewer than 8 hierarchies.

121

6. TIPS FOR OPERATING THE AUDIO SYSTEM

ERROR MESSAGES

Mode

CD

USB iPod

Message

“No music files found.”

“Check DISC”

“DISC Error”

Explanation

This indicates that no MP3/WMA/AAC files are included in the DISC.

It indicates that the disc is dirty, damaged, or it was inserted upside down. Clean the disc or insert it correctly.

It indicates a disc which is not playable is inserted.

There is a trouble inside the system.

Eject the disc.

“Connection error. Please consult your Owner’s

Manual for instructions on how to connect the USB device.”

“There are no files available for playback. Please add compatible files to your USB device.”

“Connection error. Please consult your Owner’s

Manual for instructions on how to connect the iPod.”

“There are no songs available for playback. Please add compatible files to your iPod.”

This indicates a problem in the USB memory or its connection.

This indicates that no MP3/WMA/AAC files are included in the USB memory.

This indicates a problem in the iPod or its connection.

This indicates that there is no music data in the iPod.

“Please check the iPod firmware version.”

“iPod authorization unsuccessful.”

This indicates that the software version is not compatible. Perform the iPod firmware updates and try again.

This indicates that it failed to authorize the iPod.

Please check your iPod.

INFORMATION

If the malfunction is not rectified: Take your vehicle to your Toyota dealer.

122

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

1. REAR SEAT ENTERTAINMENT SYSTEM FEATURES*

The rear seat entertainment system is designed for the rear passengers to enjoy video such as Blu-ray Disc™ (BD) and DVD disc.

The video played by the rear seat entertainment system is not displayed on the multimedia system’s screen. In addition, the DVD video played by the multimedia system is not displayed on the rear seat entertainment system’s screen.

3

No.

Name

Rear seat entertainment system

Remote controller

A/V input port

No.

Name

Headphone volume control dials and headphone jacks

Multimedia system

INFORMATION

The rear seat entertainment system can be used when the engine switch is in ACC or ON position.

*: If equipped

123

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

WARNING

For vehicles sold in U.S.A. and Canada

Part 15 of the FCC Rules

FCC Warning:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Laser products

• USE OF CONTROL OF ADJUST-

MENT OR PERFORMANCE OF

PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY

RESULT IN HAZARDOUS RADIA-

TION EXPOSURE.

• THE USE OF OPTICAL INSTRU-

MENTS WITH THIS PRODUCT

WILL INCREASE EYE HAZARD.

DISPLAY

OPENING THE DISPLAY

1

Press the lock release button to open the display.

2

Pull the display down to an easily viewable angle.

CLOSING THE DISPLAY

1

Push the display up until a click is heard.

124

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

INFORMATION

The illumination of the screen automatically turns off when the display is closed.

However, the rear seat entertainment system is not turned off. (The sound is not turned off.)

DISC SLOT

LOADING A DISC

1

Insert the disc into the slot with the label side up.

3

WARNING

When the rear seat entertainment system is not used

• Keep the display closed. In the event of an accident of sudden braking, the opened display may hit an occupant’s body, resulting in injury.

NOTICE

Cleaning the display

• Wipe the display with a dry soft cloth. If the screen is wiped with a rough cloth, the surface of the screen may be scratched.

Opening and closing the display

• When opening or closing the display, hold the bottom center of the display outer frame. Holding or pressing the

LCD panel could result in display problems or LCD deterioration.

The

“DISC”

indicator light turns on while the disc is loaded.

The player will start to play the disc automatically.

EJECTING A DISC

1

Press the

disc.

button and remove the

INFORMATION

If a disc cannot be ejected, do not forcibly take out the disc. Keep pressing the

“ ”

button for approximately 10 seconds and release it.

If the ejected disc remains in the slot for

15 seconds, the player will automatically reload the disc.

125

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

SD CARD SLOT

1

Insert the SD card with the label side up, positioning the cut off corner to the right.

REMOTE CONTROLLER

The rear seat entertainment system can be operated with the remote controller. The system cannot be operated by touching the switches on the screen directly.

To eject the SD card, push on the center of the SD card. When it ejects slightly pull it straight out.

No.

Function

Turning on/off the rear seat entertainment system

Selecting a control icon

Inputting the selected control icon

Turning on/off the speaker output

Changing the screen size

Turning on the “VIDEO” mode

Adjusting the volume

Turning on the “SD” mode

126

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

No.

Function

Turning on the “DISC” mode

Adjusting the screen settings

TURNING ON/OFF THE REAR

SEAT ENTERTAINMENT

SYSTEM

1

Press the button to turn on the rear seat entertainment system.

Press the off the system.

button once again to turn

CHANGING THE AUDIO/VIDEO

SOURCE

1

Press the

“DISC”

,

“SD”

or

“VIDEO”

button to change the audio/video source.

SELECTING A CONTROL ICON

1

Press the “ ”, “ ”, “ ” or “ ” button to select the control icon on the screen.

3

ADJUSTING THE VOLUME

1

Press

“+”

or

“-”

on the

“VOL”

button to adjust the volume.

When the speaker output is off, the volume cannot be adjusted.

2

Press the

“ENT”

button to enter.

TURNING ON/OFF THE

SPEAKER OUTPUT

1

Press the button to turn on/off the speaker output.

On: The sound is available from both vehicle speakers and headphones.

Off: The sound is available from the headphones only.

CHANGING THE SCREEN SIZE

1

Press the

“SIZE”

button to change the screen size.

Screen size

Function

“Normal”

“Wide 1”

“Wide 2”

Displays the screen at the original ratio

Widens the 4:3 aspect screen horizontally to fill the screen

Widens the screen vertically and horizontally, at the same ratio, to fill the entire screen

INFORMATION

The screen size can be changed for each media mode individually.

127

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

ADJUSTING THE SCREEN

SETTINGS

You can adjust the color, contrast, tone and brightness of the screen. The screen setting levels can be adjusted for day mode and night mode individually.

1

Press the

“SETTING”

button.

2

The screen settings can be adjusted.

After adjustments, select

“OK”

.

“DISC” and “SD” mode

“VIDEO” mode

No.

Function

Weakens the contrast of the screen

Strengthens the contrast of the screen

Darkens the screen

Brightens the screen

Strengthens red color of the screen

Strengthens green color of the screen

Weakens the tone of the screen

Strengthens the tone of the screen

BEFORE USING THE REMOTE

CONTROLLER (FOR NEW

VEHICLE OWNERS)

1

Remove the insulating sheet.

128

No.

Function

Turning on/off the speaker output

Turning on/off the “LCD AI”. The

“LCD AI” is automatically determines the tone of the video image and sets the contrast to an optimum level, displaying a sharp image.

INFORMATION

An insulating sheet is set to prevent the batteries from being discharged.

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

WHEN THE REMOTE

CONTROLLER BATTERIES

ARE FULLY DEPLETED

1

Remove the cover.

WARNING

To prevent accidents and electric shock

• Do not disassemble or modify the remote controller.

When the remote controller is not used

• Stow the remote controller. Injuries may result in the event of an accident or sudden braking.

Removed batteries and other parts

• Keep away from children. These parts are small and if swallowed by a child they can cause choking.

3

2

Remove the depleted batteries and install 2 new AA batteries.

NOTICE

To prevent damage to the remote controller

• Keep the remote controller away from direct sunlight, heat and high humidity.

• Do not drop or strike the remote controller against hard objects.

• Do not sit on or place heavy objects on the remote controller.

For normal operation after replacing the batteries, observe the following precautions to prevent accidents.

• Always work with dry hands. Moisture may cause the battery to rust.

• Do not touch or move any other components inside the remote controller.

• Do not bend any of the battery terminals.

INFORMATION

If the remote controller batteries are discharged, the following symptoms may occur.

• The rear seat entertainment system control will not function properly.

• The operational range is reduced.

When replacing the AA batteries

• Batteries can be purchased at your

Toyota dealer, electric appliance shop, or camera stores.

• Replace only with the same or equivalent type recommended by a Toyota dealer.

• Dispose of used batteries according to local laws.

129

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

HEADPHONE JACKS

Adjust the volume when you connect the headphones to the jack. Loud sounds may have a significant impact on the human body.

OPERATING FROM THE

FRONT SEATS

The rear seat entertainment system can be operated from the front seats.

1

Press the

“AUDIO”

button.

No.

Function

To adjust the volume

To use headphones, connect them to the jack

2

3

Select

“Source”

on the screen.

Select

“Rear”

.

WIRELESS HEADPHONES

(SOLD SEPARATELY)

With some wireless headphones generally available in the market, it may be difficult to catch signals properly. Toyota recommends the use of Toyota genuine wireless headphones.

Please contact your Toyota dealer for further details.

When the sound volume needs to be changed while a wireless headphone is used, adjust the volume using the wireless headphone’s volume switch.

130

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

4

The rear seat entertainment system can be operated from this screen.

DISCS THAT CAN BE USED

Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration.

3

No.

Function

Turning on/off the rear seat entertainment system

Turning on/off the rear system lock

The operation lock on the rear seat entertainment system can be turned on or off.

Selecting the rear seat entertainment system’s media mode

Audio/video operation buttons

Adjusting the sound settings

Video discs

Audio

CDs

The following discs cannot be used on this system:

• SACD

• BDXL™ disc

• BD-RE with the cartridge

• HD DVD

• DVD audio

• Video CD

Special shaped discs

131

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

Transparent/translucent discs

Low quality discs

NOTICE

Do not special shaped, transparent/ translucent, low quality or labeled discs such as those shown in the illustrations.

The use of such discs may damage the player, or it may be impossible to eject the disc.

This system is not designed for use of

Dual Discs. Do not use Dual Discs because they may cause damage to the player.

Do not discs with a protection ring. The use of such discs may damage the player, or it may be impossible to eject the disc.

Labeled discs

132

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

SD CARD THAT CAN BE

USED

Memory cards are restricted to the following conditions based on SD standards.

• SD memory card (from 512MB to 2GB)

• SDHC memory card (from 4GB to 32GB)

• SDXC memory card (from 48GB to

64GB)

Mini SD cards and Micro SD cards can be used, but must be used with an adaptor card.

MultiMedia Card (MMC) cannot be used.

COPYRIGHTS AND

TRADEMARKS

Blu-ray Disc™, Blu-ray™, BD-Live™,

BDXL™, and the logos are trademarks of the Blu-ray Disc Association.

Java is a registered trademark of Oracle and/or its affiliates.

3

SD CARD FUNCTIONS

This system can play JPEG pictures and

AVCHD video images that are stored in an

SD card. It does not support music playback.

Local storage

• Some BD videos have a feature to memorize disc information, such as a resume point, in a local storage. The rear seat entertainment system uses an SD card as a local storage device. To use this function, insert an SD card into the SD card slot.

• The SD card memory function may differ depending on the BD videos played.

• When an SD card that contains any kind of data is inserted, BD video disc information will not be stored into the SD card to protect the existing data in the card.

To use an SD card as a local storage, use another SD card that does not contain any data.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and

Sony Corporation.

“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.

SDXC Logo is a trademark of SD-3C,

LLC.

Manufactured under license from Dolby

Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

133

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS

Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS 2.0 Channel is a trademark of DTS, Inc.

DTS, Inc. All

Rights Reserved.

This product is licensed under the AVC patent portfolio license and the VC-1 patent portfolio license for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard and the VC-1 Standard (“AVC/VC-1

Video”) and/or (ii) decode AVC/VC-1

Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC/VC-1 Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC. See http:// www.mpegla.com.

Cinavia Notice

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially-produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.

More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http:// www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O.

Box 86851, San Diego, CA, 92138, USA.

WMA (Windows Media Audio), Microsoft,

Windows, and Windows Media are the registered trademarks of Microsoft Corporation in the U.S. and other countries.

This product incorporates proprietary technology under license from Verance

Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology.

Cinavia is a trademark of Verance Corporation. Copyright 2004-2014 Verance Corporation. All rights reserved by Verance.

Reverse engineering or disassembly is prohibited.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

134

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

This product incorporates the following software:

(1) the software developed independently by or for Panasonic Corporation,

(2) the software owned by third party and licensed to Panasonic Corporation,

(3) the software licensed under the GNU

General Public License, Version 2 (GPL

V2),

(4) the software licensed under the GNU

LESSER General Public License, Version

2.1 (LGPL v2.1) and/or,

(5) open sourced software other than the software licensed under the GPL v2 and/or

LGPL v2.1

For the software categorized as (3) and

(4), please refer to the terms and conditions of GPL v2 and LGPL v2.1, as the case may be at http://www.gnu.org/ licenses/old-licenses/gpl-2.0.html and http://www.gnu.org/licenses/old-licenses/ lgpl-2.1.html.

In addition, the software categorized as (3) and (4) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://car.panasonic.jp/ oss/c8u23ZXg/

The GPL/LGPL software is distributed in the hope that it will be useful, but WITH-

OUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-

POSE.

At least three (3) years from delivery of products, we will give to any third party who contacts us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution, a complete machinereadable copy of the corresponding source code covered under GPL v2/LGPL v2.1.

[Contact address]

Engineering Administration Group Manager

Panasonic Corporation 4261 Ikonobe-cho,

Tsuzuki-ku, Yokohama City 224-8520, Japan

Source code is also freely available to you and any other member of the public via our website bellow.

http://car.panasonic.jp/oss/c8u23ZXg/

For the software categorized as (5) includes as follows.

1. This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

2. This product includes software developed by the University of California, Berkeley and its contributors.

3. Free Type code.

4. The Independent JPEG Group’s JPEG software.

5. Vera Fonts. (http://www.gnome.org/ fonts/)

3

135

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

2. PLAYING A Blu-ray Disc™ (BD) AND DVD DISCS*

This system can play Blu-ray Disc™

(BD) videos with digital sound. In addition to commercial BD and DVD titles,

AVCHD and BDAV videos can be played on this system, so digital TV recorded by home digital video recorders and BD/DVD home videos recorded by home digital video cameras can also be played on this system.

Press the

“DISC”

button if a disc has already been loaded in the disc slot.

WARNING

BD/DVD video precaution

• Conversational speech on some BDs/

DVDs is recorded at a low volume to emphasize the impact of sound effects.

If you adjust the volume assuming that the conversations represent the maximum volume level that the BD/DVD will play, you may be startled by louder sound effects or startled when you change to a different audio source.

Loud sounds may have a significant impact on the human body or pose a driving hazard. Keep this in mind when you adjust the volume.

REMOTE CONTROLLER

No.

Function

Selecting a control icon

Inputting the selected control icon

Volume up/down

Fast-forward/rewind

Play/pause

Stop

Displaying the menu screen

Displaying the option screen

Displaying the top menu screen

Selecting a chapter

Turning on the BD/DVD mode

*: If equipped

136

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

TURNING ON THE BD/DVD

MODE

1

Insert a disc or press the

“DISC”

button.

The player will start to play the disc automatically.

PLAYING/PAUSING A DISC

OPTION SCREEN

Press the

“OPTION”

button while watching a BD/DVD video, the following screen appears.

Press the

“OPTION”

button once again or select

“Hide Buttons”

to turn off the option screen.

BD video

3

1

Press the button to play/pause.

Press and hold the button while pausing, the video is played slowly.

OPERATING THE DISC MENU

1

Press the

“TOP MENU”

or

“MENU”

button.

2

Select the menu item, and press the

“ENT”

button to enter.

137

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

DVD video

BDAV

AVCHD

No.

Function

Turning off the option screen

Displaying the third page

Displaying the second page

Displaying the top menu screen

Displaying the pop-up menu

Displaying the menu screen

Rewind

Stop

Play/pause

Fast-forward

Displaying the initial setup screen

Displaying the top page

Searching for a title

Searching for a chapter

138

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

No.

Function

Returning to the predetermined scene

Changing the audio language

Changing the subtitle language

Changing the angle

Changing the playback mode

Changing the audio channel

Displaying the color key buttons

Displaying the 10 key pad

Displaying the secondary video

(Picture-in-picture)

Changing the secondary audio

DISPLAYING THE POP-UP

MENU

BD video

Some BD video discs have a pop-up navigation menu that can be called up and be operated on the screen without interrupting playback.

1

2

Select

“Pop-up Menu”

.

Select the menu item, and press the

“ENT”

button to enter.

3

SEARCHING FOR A TITLE OR

CHAPTER

1

Select

“Title Search”

or

“Chapter

Search”

.

2

Input the title number or chapter number, and select

“OK”

.

139

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

CHANGING THE ANGLE

The angle can be changed for discs that are multi-angle compatible when the angle mark appears on the screen.

1

2

Select

“Angle”

.

Each time

“Angle”

is selected, the angle changes.

CHANGING THE AUDIO

LANGUAGE

The audio language can be changed for discs with multiple audio languages.

1

2

Select

“Audio”

.

Each time

“Audio”

is selected, another language available on the disc is selected.

CHANGING THE SUBTITLE

LANGUAGE

The subtitle language can be changed for discs with multiple subtitle languages.

1

2

Select

“Subtitle”

.

Each time

“Subtitle”

is selected, another language available on the disc is selected.

CHANGING THE AUDIO

CHANNEL

BDAV

The audio channel can be changed for discs with multiple audio channels.

1

Each time

“MAIN/SUB”

is selected, the mode changes in the following order:

“Hide”

: Subtitle can be hidden.

BD video

“Style”

: Subtitle style can be changed.

“MAIN”: Main audio channel

“SUB”: Sub audio channel

“MAIN/SUB”: Both the main and sub audio channels

140

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

CHANGING THE PLAYBACK

MODE

BDAV

The playback mode can be changed to program mode or playlist mode. Playlist mode cannot be selected if a playlist is not stored on the disc.

1

2

Select

“Playback mode”

.

Each time

“Playback mode”

is selected, the mode changes in the following order:

DISPLAYING THE

SECONDARY VIDEO

BD video

Picture-in-picture is a secondary video that plays embedded in the primary video. The secondary video can be played from a disc compatible with the picture-in-picture function.

1

2

Select

“PinP”

.

The secondary video is displayed on the screen. Each time

“PinP”

is selected, another secondary video available on the disc is selected.

3

“Program” mode: Playback the disc in order of program number

“Playlist” mode: Playback the disc in order of playlist number

“Hide”

: Secondary video can be hidden.

141

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

CHANGING THE SECONDARY

AUDIO

BD video

The secondary audio that for the secondary video can be changed.

1

2

Select

“PinP Audio”

.

Each time

“PinP Audio”

is selected, another secondary audio stored on the disc is selected.

DISPLAYING THE 10 KEY PAD

BD video

The 10 key pad is used when inputting numbers according to directions of contents.

1

2

Select

“Key Pad”

.

The 10 key pad is displayed on the screen.

“OFF”

: Secondary audio can be turned off

DISPLAYING THE COLOR KEY

BUTTONS

BD video

The color key button is used for various uses according to directions of contents.

1

2

Select

“Color Keys”

.

The color key buttons are displayed on the screen.

142

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

INITITAL SETUP

The initial setting can be changed.

1

2

Select

“Setup”

.

Select the settings to be changed. After the settings are changed, select

“OK”

.

No.

Function

Setting the BD parental lock

Setting a quick playback

Sound Dynamic Range

Returns to previous page

1

2

CHANGING THE INITIAL AUDIO

LANGUAGE

Select

“Audio Language”

.

Select the desired language.

3

No.

Function

Changing the initial audio language

Changing the initial subtitle language

Changing the initial language of the disc menu

Setting the angle mark

Setting the DVD parental lock

Goes to next page

Restores default settings

BD history data such as bookmarks and resume point can be deleted.

If you cannot find the desired language, select

“Other”

and input the desired language code. (

P.148)

1

2

CHANGING THE INITIAL SUBTITLE

LANGUAGE

Select

“Subtitle Language”

.

Select the desired language.

If you cannot find the desired language, select

“Other”

and input the desired language code. (

P.148)

143

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

1

2

CHANGING THE INITIAL LAN-

GUAGE OF THE DISC MENU

Select

“Disc Menu Language”

.

Select the desired language.

SETTING THE DVD PARENTAL

LOCK

DVD video

The level of viewer restrictions can be set.

1

2

Select

“DVD Parental Lock”

.

Input the 4-digit personal code and then select

“OK”

.

If you cannot find the desired language, select

“Other”

and input the desired language code. (

P.148)

SETTING THE ANGLE MARK

If the BD/DVD disc has angle options, you can turn the angle mark on/off.

1

Each time

“Angle Mark”

is selected,

“ON” or “OFF” can be selected.

Select 10 times to reset the personal code in case the code was forgotten.

3

Select a restriction level (1-8) and then select

“OK”

.

144

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

SETTING THE BD PARENTAL

LOCK

BD video

The age of viewer restrictions can be set.

1

2

Select

“BD Parental Lock”

.

Input the 4-digit personal code and then select

“OK”

.

SETTING A QUICK PLAYBACK

BD video

After inserting a BD disc you can skip over to the first playback point and can immediately playback the main story.

1

Each time

“Quick Playback”

is selected, “ON” or “OFF” can be selected.

3

Select 10 times to reset the personal code in case the code was forgotten.

3

Input a restriction age (0-255) and then select

“OK”

.

SETTING A SOUND DYNAMIC

RANGE

The difference between the lowest and highest sound volumes can be adjusted.

Each time

“Sound Dynamic Range”

is selected, the setting changes in the following order:

“MAX”: Maximum dynamic range

“STD”: Standard dynamic range

“MIN”: Minimum dynamic range

145

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

BD/DVD VIDEO DISCS

BD/DVD VIDEO DISCS

Compatible media

Media that can be used for playback are

BD-ROMs, BD-Rs, BD-REs, DVD-ROMs,

DVD-Rs and DVD-RWs.

Compatible disc formats

Disc formats that can be used for playback are AVCHD* BD video formats, BDAV formats, AVCHD formats, and DVD video formats

This player conforms to NTSC/PAL color

TV formats.

*: For AVCHD playback, use a disc with data that was saved using a video recording device. .mts and .m2ts files cannot be played by themselves.

Region codes

Some BD/DVD video discs have a region code indicating the region in which you can use the BD/DVD video disc.

If the BD video disc is not labeled “A” or

“ABC” or if the DVD video disc is not labeled “1” or “ALL”, you cannot use it on this player.

If you attempt to play BD/DVD video discs with incompatible region codes on this player, an error message appears on the screen. Even if the BD/DVD video disc does not have a region code, in some cases it cannot be used.

When storing content on BD-R, BD-RE,

DVD-R or DVD-RW discs, they must be finalized using a recorder. Discs that are not finalized cannot be played by this system.

Discs that are recorded with multi session cannot be played by this system.

BD-Live™ is not supported.

SYMBOLS SHOWN ON BD/DVD

VIDEO DISCS

Symbol Meaning

Indicates PAL/NTSC format

Indicates the number of audio tracks

Indicates the number of language subtitles

Indicates the number of angles

Indicates the screen display ratios available

Wide screen: 16:9

Standard: 4:3

Indicates the disc’s region code

BD video

“ABC”: all regions

Alphabet: region code

DVD video

“ALL”: all regions

Number: region code

146

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

BD/DVD VIDEO DISC

INFORMATION

Parental controls

This feature limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the BD/DVD video disc.

Some BD/DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes.

• DVD video

Level 1: DVD video discs for children can be played.

Level 2 - 7: DVD video discs for children and G-rated movies can be played.

Level 8: All types of DVD video discs can be played.

• BD video

Parental controls of BD videos can be set up by inputting an age. If the target age of

BD video exceeds the age restriction that was set up, then playback will not be possible.

Multi-angle feature

You can enjoy the same scene from different angles.

Multi-language option

You can select the subtitle and audio languages.

Region codes

The region codes are provided on BD/DVD players and BD/DVD discs. If the BD/DVD disc does not have the same region code as the BD/DVD player, you cannot play the disc on the player.

Title and chapter

Video and audio programs stored in BD/

DVD video discs are divided into parts by title and chapter.

Title: The largest unit of the video and audio programs stored on BD/DVD video discs. Usually, one movie, one album, or one audio program is assigned as a title.

Chapter: A title comprises of one or more chapters.

AVCHD

AVCHD is a new format (standard) for high definition video cameras that can record and play high-resolution HD images.

DVDs and SD cards with videos recorded in AVCHD format can playback on this system.

BDAV (Blu-ray Disc™ Audio/Visual)

BDAV is one of the audio/video recording formats for Blu-ray Disc™, has been made primarily for the purpose of broadcasting the recording.

It is used when recording to BD-R and BD-

RE by Blu-ray™ recorder.

BD-J

Some BD video discs contain Java applications, and these applications are called

BD-J. You can enjoy various interactive features in addition to playing normal video.

Pop-up menu

Some BD video discs have a pop-up navigation menu that can be called up and be operated on the screen without interrupting playback.

Picture-in-picture

This is a function of BD video that plays the primary video and secondary video simultaneously. For instance, the function is capable of playing the original movie as the primary video while playing video commentary from the film director on a small screen as a secondary video.

DUBA (Disc Unbound BD-J Application)

For BD videos that come as a 2 disc set or more, after finishing and ejecting one of the discs, continuation of the video can be seen shortly after replacing the disc with the proper disc.

Playlist (BDAV only)

A playlist of favorite scenes by Blu-ray™ recorder can be created and the scenes can playback via playlist.

3

AUDIO

This player can play liner PCM, Dolby digital, DTS and MPEG audio format. Other decoded types cannot be played.

147

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

LANGUAGE CODES LIST

Code Language

0514 English

0618 French

0405 German

0920 Italian

0519 Spanish

2608 Chinese

1412 Dutch

1620 Portuguese

1922 Swedish

1821 Russian

1115 Korean

0512 Greek

0101 Afar

0102 Abkhazian

0106 Afrikaans

0113 Amharic

0118 Arabic

0119 Assamese

0125 Aymara

0126 Azerbaijani

0201 Bashkir

0205 Byelorussian

0207 Bulgarian

0208 Bihari

0209 Bislama

0214 Bengali

0215 Tibetan

0218 Breton

0301 Catalan

0315 Corsican

0319 Czech

0325 Welsh

0401 Danish

0426 Bhutani

0515 Esperanto

Code Language

0520 Estonian

0521 Basque

0601 Persian

0609 Finnish

0610 Fiji

0615 Faroese

0625 Frisian

0701 Irish

0704 Scots-Gaelic

0712 Galician

0714 Guarani

0721 Gujarati

0801 Hausa

0809 Hindi

0818 Croatian

0821 Hungarian

0825 Armenian

0901 Interlingua

0905 Interlingue

0911 Inupiak

0914 Indonesian

0919 Icelandic

0921 Inuktitut

0923 Hebrew

1001 Japanese

1009 Yiddish

1023 Javanese

1101 Georgian

1111 Kazakh

1112 Greenlandic

1113 Cambodian

1114 Kannada

1119 Kashmiri

1121 Kurdish

1125 Kirghiz

Code

1201 Latin

Language

1214 Lingala

1215 Laotian

1220 Lithuanian

1222 Latvian

1307 Malagasy

1309 Maori

1311 Macedonian

1312 Malayalam

1314 Mongolian

1315 Moldavian

1318 Marathi

1319 Malay

1320 Maltese

1325 Burmese

1401 Nauru

1405 Nepali

1415 Norwegian

1503 Occitan

1513 (Afan) Oromo

1518 Oriya

1601 Punjabi

1612 Polish

1619 Pashto, Pushto

1721 Quechua

1813 Rhaeto-Romance

1814 Kirundi

1815 Romanian

1823 Kinyarwanda

1901 Sanskrit

1904 Sindhi

1907 Sangho

1908 Serbo-Croatian

1909 Sinhalese

1911 Slovak

2007 Tajik

2008 Thai

2009 Tigrinya

2011 Turkmen

2012 Tagalog

2014 Setswana

2015 Tonga

2018 Turkish

2019 Tsonga

2020 Tatar

2023 Twi

2107 Uighur

2111 Ukrainian

2118 Urdu

2126 Uzbek

Code Language

1912 Slovenian

1913 Samoan

1914 Shona

1915 Somali

1917 Albanian

1918 Serbian

1919 Siswati

1920 Sesotho

1921 Sundanese

1923 Swahili

2001 Tamil

2005 Telugu

2209 Vietnamese

2215 Volapük

2315 Wolof

2408 Xhosa

2515 Yoruba

2601 Zhuang

2621 Zulu

148

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

3. PLAYING AN AUDIO CD AND MP3/WMA DISCS*

Press the

“DISC”

button if a disc has already been loaded in the disc slot.

The player will start to play the disc automatically.

REMOTE CONTROLLER

CONTROL SCREEN

3

No.

Repeat play

Function

Random playback

No.

Function

Selecting a control icon

Inputting the selected control icon

Volume up/down

Fast-forward/rewind

Play/pause

Selecting a track/file

Selecting a folder

Turning on the audio CD and MP3/

WMA mode

TURNING ON THE AUDIO CD

AND MP3/WMA MODE

1

Insert a disc or press the

“DISC”

button.

The player will start to play the disc automatically.

SELECTING A TRACK/FILE

1

sired track/file number appears.

FAST FORWARDING OR

REWINDING A TRACK/FILE

1

Press and hold or .

*: If equipped

149

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

SELECTING A FOLDER

MP3/WMA

1

Press “

” or “

” on the

“FOLDER”

button until the desired folder number ap-

 pears.

Press and hold

on the

“FOLDER”

button, the top file stored in the top folder in the disc will be selected.

REPEAT PLAY

1

Each time

“RPT”

is selected, the mode changes as follow:

Audio CD

“RPT” (track repeat)

Off

MP3/WMA

“RPT” (file repeat)

“FLD.RPT” (folder repeat)

Off

RANDOM PLAYBACK

1

Each time

“RAND”

is selected, the mode changes as follow:

Audio CD

“RAND” (random)

Off

MP3/WMA

“RAND” (1 folder random)

“FLD.RAND”

(1 disc random)

Off

MP3 AND WMA FILES

MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately

1/10 of their original size by using MP3 compression.

WMA (Windows Media Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3 format.

There is a limit to the MP3 and WMA file standards and to the media/formats recorded by them that can be used.

MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF

LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz)

MPEG2 LSF LAYER3: 16, 22.05, 24

(kHz)

• Compatible bit rates (compatible with

VBR)

MPEG1 LAYER3: 64, 80, 96, 112, 128,

160, 192, 224, 256, 320 (kbps)

MPEG2 LSF LAYER3: 64, 80, 96, 112,

128, 144, 160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and mono

WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible with 2-channel playback)

Ver. 7, 8, 9: CBR 48, 64, 80, 96, 128, 160,

192 (kbps)

150

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

Compatible media

Media that can be used for MP3 and WMA playback:

• CD-ROM/R/RW

• DVD-ROM/R/RW

Playback in some instances may not be possible, depending on the status of the disc. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.

Compatible disc formats

The following disc formats can be used.

• Disc formats: CD-ROM Mode 1, CD-

ROM XA Mode 2 Form 1

• File formats: ISO9660 Level 1, Level 2

(Romeo, Joliet), UDF (2.01 or lower)

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows.

• Maximum directory hierarchy: 8 levels

• Maximum length of folder names/file names: 20 characters

• Maximum number of folders: 255

(including the root)

• Maximum number of files per disc: 512

File names

The only files that can be recognized as

MP3/WMA and played are those with the extension .mp3 or .wma.

Multi-sessions

As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files.

ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc.

The system is compatible with ID3 Ver.

1.0, 1.1, and Ver. 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0

and 1.1.)

WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with

ID3 tags.

MP3 and WMA playback

When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.

If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.

Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit rate of

128 kbps and a sampling frequency of

44.1 kHz.

• Playback may not be possible in some instances, depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3 and

WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all.

3

151

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

4. PLAYING AN SD CARD*

This system can play still pictures and

AVCHD video that are stored in an SD card. It does not support music playback.

Press the

“SD”

button if an SD card has already been inserted in the SD card slot.

REMOTE CONTROLLER

No.

Function

Displaying the option screen

Selecting a chapter

Turning on the SD card mode

MAIN MENU

152

No.

Function

Selecting a control icon

Inputting the selected control icon

Volume up/down

Fast-forward/rewind

Play/pause

Stop

No.

Function

Playing still pictures

Playing AVCHD video

Formatting the SD card

Deleting the BD history data

Page

153

154

155

155

*: If equipped

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

PLAYING STILL PICTURES

You can display still pictures that are stored in an SD card.

1

Select

“Picture”

.

OPTION SCREEN

Press the

“OPTION”

button while displaying a still picture, the following screen appears. Press the

“OPTION”

button once again or select

“Hide Buttons”

to turn off the option screen.

3

2

Select the desired still picture to show.

Select or or previous page.

3

to show the next

Selected picture is displayed on the screen.

Press the “ ” or “ ” button to display the next or previous still picture.

Press the

“SD”

button to return to the “SD

Menu” screen.

No.

Function

Turning off the option screen

Displaying the slideshow setup screen

Returning to “Library View” screen

Zooming out the still pictures

Rotating the still pictures

Starting slideshow

STARTING SLIDESHOW

You can display still pictures one by one at a constant interval.

1

Select

“Slideshow”

to start slideshow.

When pressing the “

or “

button during slideshow, the previous or next still picture will be shown, and the slideshow will continue from that picture.

Press the

“ENT”

or

“OPTION”

button to stop slideshow.

153

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

ROTATING THE STILL PICTURES

1

Select or to rotate a still picture.

The rotate information will be maintained until the system is turned off or the SD card is removed.

ZOOM OUT THE STILL PICTURES

1

Select tures.

to zoom out the still pic-

Select again to cancel zoom out.

This function is only available for smallsized still pictures.

SLIDESHOW SETUP

1

Select

“Setup”

.

2

The slideshow settings can be changed. After the settings are changed, select

“OK”

.

PLAYING AVCHD VIDEO

You can play AVCHD videos that are stored in an SD card.

1

Select

“Video”

.

2

AVCHD video will start playing.

No.

Function

Selects slideshow interval time

(seconds)

5

10

15

30

60

Selects slideshow effect

“Fade”

“Slide”

“Wipe1”

“Wipe2”

“Dissolve”

“Zoom”

“OFF”

Selects on/off repeat slideshow

Restores default settings

Press the

“SD”

button to return to the “SD

Menu” screen.

Press the

“OPTION”

button while watching a video, the option screen appears.

For details on operating the option screen of AVCHD video, see “OPTION SCREEN”

on page 137.

154

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

FORMATTING THE SD CARD

1

Select

“Format SD Card”

.

2

Select

“Yes”

to format the SD card.

If the SD card is formatted, all data on the card will be erased.

DELETING THE BD HISTORY

DATA

The BD history data such as bookmarks and resume information can be deleted.

1

2

Select

“Clear BD Data”

.

Select

“Yes”

to delete the BD history data.

SD CARD INFORMATION

Compatible files

The following files can be displayed.

Picture file format: JPEG

• Picture resolution: between 34 and 8192

×

8192 pixels

• Gray scale JPEG is not supported

×

34

Video file format: AVCHD

• For AVCHD playback, use a disc with data that was saved using a video recording device. .mts and .m2ts files cannot be played by themselves.

Compatible formats

This system is compatible with SD memory cards that meet SD card specifications

FAT16 formats, SDHC memory cards in

FAT32 format, and SDXC memory cards in exFAT format.

An SD card is not provided with the rear seat entertainment system and needs to be purchased separately.

The Panasonic SD memory card format software version 4.0 or higher is recommended.

Data stored in an SD card may be lost.

Before playing back pictures and videos stored in an SD card, make certain to back up the data.

Before an SD card that contains any kind of data is played, slide the lock switch on the SD card to “LOCK” in order to prevent any data from being accidentally deleted or overwritten.

3

155

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

WARNING

SD cards

• Keep away from children. These are small and if swallowed by a child they can cause choking.

NOTICE

Failure to follow the precautions below may result in damage to the SD cards or the SD card slot.

• Do not insert anything other than an

SD card into the SD card slot.

• Do not stick levels or stickers on SD card. There is a possibility that it may become impossible to eject the SD card from inside the slot.

• Do not handle an SD card with wet hands. Doing so may cause electric shock or a malfunction.

• Do not allow hands or metal objects to contact the interface pins of SD cards.

• Do not place SD cards on the instrument panel, on any place with direct sunlight or in areas with a lot of moisture.

• Do not use SD cards in any place where static electricity or electric noise adversely affects SD cards. This may cause data corruption or data loss.

• Always place the SD card in its storage case when not in use.

156

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

5. USING THE VIDEO MODE*

The rear seat entertainment system plays videos and sound when audiovideo equipment is connected to the

A/V input port.

Press the

“VIDEO”

button to turn on the video mode.

USING THE A/V INPUT PORT

1

Open the cover and connect audio-video equipment to the A/V input port.

3

REMOTE CONTROLLER

No.

Function

Turning on the video mode

Volume up/down

The A/V input port is composed of 3 input jacks.

Yellow: Video input

White: Left channel audio input

Red: Right channel audio input

2

Turn on the power of the audio-video equipment.

3

Press the

“VIDEO”

button to turn on the video mode.

INFORMATION

The volume can be adjusted using the vehicle’s audio controls. All other operations must be made on the audio-video equipment itself.

For details about operation of audiovideo equipment, refer to the manufacturer’s instructions.

NOTICE

When the A/V input port is not in use, keep the A/V input port cover closed.

Inserting anything other than an appropriate plug may cause electrical failure.

*: If equipped

157

7. REAR SEAT ENTERTAINMENT SYSTEM OPERATION

158

4

VOICE COMMAND SYSTEM

2

1

VOICE COMMAND SYSTEM

OPERATION

3

1. VOICE COMMAND SYSTEM ...... 160

USING THE VOICE

COMMAND SYSTEM........................ 160

VOICE COMMAND

SYSTEM OPERATION...................... 161

4

5

2. CASUAL SPEECH

RECOGNIZATION..................... 165

6

3. COMMAND LIST ......................... 166

7

2

MOBILE ASSISTANT

OPERATION

8

1. MOBILE ASSISTANT.................. 168

9

1

159

1. VOICE COMMAND SYSTEM OPERATION

1. VOICE COMMAND SYSTEM

The voice command system enables the navigation, audio and hands-free systems to be operated using voice commands.

Refer to the command list for samples of voice commands. (

USING THE VOICE

P.166)

COMMAND SYSTEM

STEERING SWITCH

Talk switch

Press the talk switch to start the voice command system.

To cancel voice recognition, press and hold the talk switch.

MICROPHONE

INFORMATION

The voice command system can be operated while guidance is being spoken, when “Voice Prompt Interrupt”

(

P.59) is set to on. (It is not necessary

to wait for the confirmation beep before speaking a command.)

When voice interruption mode is turned on, it is easier to pick up external noise because the multimedia system is always ready for a command.

Voice commands may not be recognized if:

• Spoken too quickly.

• Spoken at a low or high volume.

• The windows are open.

• Passengers are talking while voice commands are spoken.

• The air conditioning speed is set high.

• The air conditioning vents are turned towards the microphone.

In the following conditions, the system may not recognize the command properly and using voice commands may not be possible:

• The command is incorrect or unclear.

Note that certain words, accents or speech patterns may be difficult for the system to recognize.

• There is excessive background noise, such as wind noise.

Select “Train Voice Recognition” on

“Voice Settings” screen (

P.59). This

feature is used by the multimedia system to learn the user’s accent, which can increase the voice recognition performance.

It is unnecessary to speak directly into the microphone when giving a command.

160

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND SYSTEM

OPERATION

The voice command system is operated by selecting a tab corresponding to each function. The tabs are found on the upper part of the screen.

1

2

Press the talk switch.

Select

“OK”

.

4

Say the command displayed on the screen.

To train voice recognition and to display the tutorial. (

P.162)

To prevent the screen from being displayed again, select

“Do Not Tell Me

Again”

.

3

Say the tab selection command or select the desired tab.

Registered POIs, registered names in the contacts list etc., can be said in the place of the “<>” next to the commands.

(

P.166)

For example: Say

“Find nearby dining”

,

“Call John smith”

etc.

If a desired outcome is not shown, or if no selections are available, perform one of the following to return to the previous screen:

• Say

“Go back”

.

• Select

“Go Back”

.

To cancel voice recognition, select

“ Cancel ”

, or press and hold the talk switch.

4

INFORMATION

If the system does not respond or the confirmation screen does not disappear, press the talk switch and try again.

“Voice Recognition Prompts”

can be adjusted on the “Voice Settings” screen.

(

P.59)

Voice guidance can be canceled by setting voice prompts to off. Use this setting when it is desirable to say a command immediately after pressing the talk switch and hearing a beep.

Commands related with each function are displayed on the screen of the each function tab. Some commonly used commands are displayed on the screen of the function tab.

Selecting

“Help”

or saying

“Help”

prompts voice guidance to offer examples of commands and operation methods.

161

1. VOICE COMMAND SYSTEM OPERATION

DISPLAYING THE “Voice Settings”

SCREENS

VOICE COMMAND EXAMPLE:

LAUNCH Entune App Suite

APPLICATION (ENTUNE

PREMIUM AUDIO ONLY)

1

Press the talk switch.

2

Say

“Launch <application name>”

.

Entune App Suite application screen is displayed.

Selecting

“Voice Settings”

can be displayed the “Voice Settings” screen.

(

P.59)

1

Press the talk switch.

No.

DISPLAYING THE TRAIN VOICE

RECOGNITION AND TUTORIAL

SCREENS

Function

Select to train voice recognition.

Select to display the voice recognition tutorial.

2

Select the desired item to be set.

VOICE COMMAND EXAMPLE:

PERFORMING A DESTINATION

SEARCH BY ADDRESS

(ENGLISH ONLY) (ENTUNE

PREMIUM AUDIO ONLY)

1

2

Press the talk switch.

Say

“Enter an address”

.

3

Say

“<house number, street name, city name, State>”

continuously.

A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say

“<number>”

or select the number.

Some areas cannot be recognized by the voice recognition system.

For information regarding the state/ province setting to perform a destination search by address:

P.247

4

Say

“Go directly”

.

After this, follow the voice guidance and search for a destination route by voice command operation.

162

1. VOICE COMMAND SYSTEM OPERATION

INFORMATION

The voice command recognition is designed to recognize the main body of the official street name.

For example: if the official street name is

“East Main Street”

, the voice command recognition will recognize

“Main”

.

Say the desired number, cardinal/direction etc. in the place of the “<>”.

For example: Say

“West 555”

.

Inputting the house number can be skipped.

Even if the state set using voice recognition is different from the set state in the

“Address” screen (which was set when a destination was set manually), the set state in the “Address” screen will not change. (

P.248)

The house number voice recognition conditions are outlined below:

• Numerals: 10 digits or less

• Numerals and cardinal/direction or a hyphen and numerals: A total of 9 digits or less (Do not say

“and”

.)

• Cardinal/direction or a hyphen and numerals: A total of 9 digits or less

(Do not say

“and”

.)

• Numerals are recognized as single digits only.

• The cardinal/direction and hyphens are only recognized once.

• The following cardinal/directions can be recognized: North, East, West and

South.

VOICE COMMAND EXAMPLE:

SEARCH FOR A SONG

1

Press the talk switch.

2

Say

“Play song <name>”

.

A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say

“<number>”

or select the number.

The system starts playing music and the song lists are displayed.

4

INFORMATION

The Gracenote database is only compatible with the USB or iPod mode.

A USB memory or iPod must be connected to enable track searching and playback. (

P.97, 101)

When a USB memory or iPod is connected, recognition data is created so tracks can be searched using voice commands.

Recognition data is updated under the following conditions:

• When the USB memory or iPod data has changed.

• When the voice recognition language is changed. (

P.54)

While the recognition data is being created or being updated, a track search cannot be performed using a voice command.

163

1. VOICE COMMAND SYSTEM OPERATION

VOICE COMMAND EXAMPLE:

CALL NAME

1

Press the talk switch.

2

Say

“Call <contacts> <phone types>”

.

A confirmation screen will be displayed showing the recognition results. If multiple matching items are found, a selection screen will be displayed. Say

“<number>”

or select the number.

INFORMATION

In the same manner as it is displayed on the screen, “Call <contacts> <phone types>”, after saying

“Call a contact”

say the name, or the name and type of phone, of a contact.

For example:

“Call a contact”

,

“John

Smith”

or

“Call a contact”

,

“Mary

Davis”

,

“Mobile”

There are 4 types of phones: Home,

Mobile, Work and Other.

Short or abbreviated names in the contacts list may not be recognized. Change names in the contacts list to full names.

Sometimes a voice recognition result confirmation screen will be displayed.

After confirming the result, say

“Yes”

or

“No”

.

When the system recognizes multiple names from the contacts list, a name candidate list will be displayed on the screen. If the desired name is not displayed on the top of the screen, say or select the number of the name from the candidate list (number 1 and number 2, etc.) to select a name from the candidate list.

When a contact has multiple phone numbers registered in the contacts list, a candidate list will be displayed. If the desired phone number is not displayed on the top of the screen, say or select the number of the desired phone number from the candidate list (number 1 and number 2, etc.) to select a phone number from the candidate list.

VOICE COMMAND EXAMPLE:

DIAL NUMBER

1

2

Say the phone number.

In the same manner as it is displayed on the screen, “Dial <number>”, after saying

“Dial a number”

say the phone number.

Say the phone number one digit at a time.

For example, if the phone number is

2345678:

Say

“two three four five six seven eight”

Do not say

“twenty three forty five sixty seven eight”

Calling to the following phone numbers

• 3 digit numbers (911, 411, 611)

• 7 digit numbers (Local phone numbers)

• 10 digit numbers (Area code + Local phone number)

• 11 digit phone numbers (1 + Area code +

Local phone number)

As the system cannot recognize additional numbers, say the complete number without stopping.

3

Press the talk switch.

Say

“Call”

or press the the steering wheel.

switch on

When the system recognizes multiple phone numbers, a phone number candidate list will be displayed on the screen.

Pressing the switch on the steering wheel makes a call to the top entry on the list. If the desired phone number is not displayed on the top of the screen, say the number of the desired phone number from the candidate list to select a phone number from the candidate list.

164

1. VOICE COMMAND SYSTEM OPERATION

2. CASUAL SPEECH RECOGNIZATION

Due to natural language speech recognition technology, this system enables recognition of a command when spoken naturally. However, the system cannot recognize every variation of each command. In some situations, it is possible to omit the command for the procedure and directly state the desired operation. Not all voice commands are displayed in the function menu.

INFORMATION

If the command cannot be recognized completely, the command input screen will be displayed. (Search results will be shown based on the part of the command that was recognized.)

EXPRESSION EXAMPLES FOR

EACH FUNCTION

Command

“Go Home”*

“Enter an

Address”*

Expression examples

Navigate to my house.

Take me home.

I need directions to an address.

Give me a street.

“Find Nearby

<POI category>”*

“Call <name>

<type>”

“Dial <number>”

“Play Artist

<name>”

Search for a <Restaurants> around here.

Find a <Restaurants> nearby.

Get me <Robert

Brown>.

Call <contacts>

<phone types>.

Call <911>.

Play the artist <name>.

I want to hear the band

<name>.

“Play Album

<name>”

Play album <name>.

*: Entune Premium Audio only

4

165

1. VOICE COMMAND SYSTEM OPERATION

3. COMMAND LIST

Recognizable voice commands and their actions are shown below.

Frequently used commands are listed in the following tables.

For devices that are not installed in the vehicle, the related commands will not be displayed in the screen. Also, according to conditions, other commands may not be displayed in the screen.

The functions available may vary according to the system installed.

Voice recognition language can be changed. (

P.54)

Basic

Command

“Help”

“Go Back”

“Number one/two/three/four/five”

“Next Page”

“Previous Page”

“Go to <tab>”

Action

Prompts voice guidance to offer examples of commands or operation methods

Returns to the previous screen

Selects the number on the list screen

Displays the next page

Displays the previous page

Displays the command list of the selected tab

Entune App Suite application*

1

When the voice recognition language is set to English.

Command

“Launch <apps>”

Action

Activates the Entune App Suite application

Navigation*

1

Command

“Find Nearby <POI category>”

Action

Displays a list of <POI category

*

2

> near the current position

“Enter an Address”

“Go Home”

Enables setting a destination by saying the address

Displays the route to home

“Cancel Route” Stops the route guidance

“Web search” Performs web search of POIs

*

1

: Entune Premium Audio only

*

2

: For example; “Gas stations”, “Restaurants”, etc.

166

1. VOICE COMMAND SYSTEM OPERATION

Phone

Command

“Redial”

“Call Back”

“Show Recent Calls”

“Dial <phone number>”

“Call <contacts> <phonetypes>”

Action

Places a call to the phone number of the latest outgoing call

Places a call to the phone number of latest incoming call

Displays the call history screen

Places a call to the said phone number

Place a call to the said phone type of the contact from the phone book

4

Audio

Command

“Play Playlist <name>”

“Play Artist <name>”

“Play Song <name>”

“Play Album <name>”

Action

Plays tracks from the selected playlist

Plays tracks from the selected artist

Plays the selected track

Plays tracks from the selected album

Info*

Command Action

“Show Forecast” Displays weather information

“Show Traffic” Displays traffic information

*: Available models and available country and areas (

P.172, 173)

167

2. MOBILE ASSISTANT OPERATION

1. MOBILE ASSISTANT

1

The Mobile Assistant feature will activate Apple’s Siri

®

Eyes Free mode via the steering wheel switches. To operate the Mobile Assistant, a compatible cellular phone must be registered and connected to this system via Bluetooth

®

. (

P.42)

Press and hold this switch until you hear the beeps.

2

The Mobile Assistant can be used only when the following screen is displayed.

• After some phone and music commands, the Mobile Assistant feature will automatically end to complete the requested action.

The volume of the Mobile Assistant can be adjusted using the

“PWR/VOL”

knob or steering wheel volume control switches. The Mobile Assistant and phone call volumes are synchronized.

INFORMATION

The available features and functions may vary based on the iOS version installed on the connected device.

Some Siri features are limited in Eyes

Free mode. If you attempt to use an unavailable function, Siri will inform you that the function is not available.

If Siri is not enabled on the cellular phone connected via Bluetooth

®

, an error message will be displayed on the screen.

While a phone call is active, the Mobile

Assistant cannot be used.

If using the navigation feature of the cellular phone, ensure the active audio source is Bluetooth

®

audio or iPod in order to hear turn by turn direction prompts.

To cancel the Mobile Assistant: Select

“Cancel”

, press the on the steering wheel, or press and hold the steering wheel.

on the

To restart the Mobile Assistant for additional commands, press the on the steering wheel.

• Mobile Assistant can only be restarted after the system responds to a voice command.

168

MICROPHONE

It is not necessary to speak directly into the microphone when using the Mobile

Assistant. (Microphone location:

P.160)

INFORMATION

Wait for the listening beeps before using the Mobile Assistant.

The Mobile Assistant may not recognize commands in the following situations:

• Spoken too quickly.

• Spoken at a low or high volume.

• The roof or windows are open.

• Passengers are talking while the

Mobile Assistant is being used.

• The air conditioning speed is set high.

• The air conditioning vents are turned toward the microphone.

2. MOBILE ASSISTANT OPERATION

4

169

2. MOBILE ASSISTANT OPERATION

170

5

INFORMATION

2

1

INFORMATION

3

1. RECEIVING WEATHER

INFORMATION ......................... 172

DISPLAYING WEATHER

INFORMATION ................................. 172

4

5

2. RECEIVING TRAFFIC MAP

INFORMATION ......................... 173

DISPLAYING TRAFFIC MAP

INFORMATION .................................... 173

6

3. DATA SERVICES SETTINGS ..... 174

SETTING DOWNLOAD METHODS .... 174

7

8

1

9

171

1. INFORMATION

1. RECEIVING WEATHER INFORMATION*

DISPLAYING WEATHER

INFORMATION

1

Press the

“APPS”

button.

2

Entune Audio Plus

Weather radar information can be received via the HD Radio.

Entune Premium Audio

Weather radar information can be received via the HD Radio or by the Entune App Suite application on a

Bluetooth

®

phone.

3

Check that the “Weather” screen is displayed.

Select

“Weather”

.

No.

Function

Select to display the weather of the current location.

Select to display the weather of a desired location in the recently checked locations list.

Select to display the weather of a desired location in the national cities list.

Select to display the weather of a desired location in the other local cities list.

Entune Premium Audio only:

Select to display Doppler weather radar information over the map.

INFORMATION

If “Weather” is set to the home screen, the weather information of the current location will be displayed.

*: Available in the 48 states, D.C. and Alaska

172

1. INFORMATION

2. RECEIVING TRAFFIC MAP INFORMATION*

Traffic map information can be received via the HD Radio.

3

Check that the traffic map screen is displayed.

DISPLAYING TRAFFIC MAP

INFORMATION

1

Press the

“APPS”

button.

2

Select

“Traffic”

.

No.

Function

Current position of your car

Traffic information line

The line color means the following:

Red: Heavy congestion

Yellow: Moderate traffic

Green: Freely flowing traffic

5

INFORMATION

Displaying traffic map can take time. If traffic map is not ready to display, the radio screen goes back to “Apps” screen after pressing traffic button. Please press again to display traffic map.

*: Entune Audio Plus only (Available in the 48 states, D.C. and Alaska)

173

1. INFORMATION

3. DATA SERVICES SETTINGS*

SETTING DOWNLOAD

METHODS

1

Data service information, which is comprised of traffic information and weather information, can be received via the HD Radio and by the Entune

App Suite application on a Bluetooth

® phone. The receiving method can be set to both or only via the HD Radio.

For details about the Entune App Suite application:

P.299

Press the

“APPS”

button.

4

Select the desired item to be set.

Select a checkbox on the right to set.

No.

Function

Select to receive data service information via both the HD Radio and the Entune App Suite application on a Bluetooth

®

phone. When both methods are available, the HD Radio will be selected.

Select to receive data only via the

HD Radio.

2

3

Select

“Setup”

.

Select

“HD Data”

.

174

*: Entune Premium Audio only (Available in the 48 states, D.C. and Alaska)

6

PERIPHERAL MONITORING SYSTEM

2

1

REAR VIEW MONITOR

SYSTEM

3

1. REAR VIEW MONITOR

SYSTEM .................................... 176

DRIVING PRECAUTIONS ................... 176

SCREEN DESCRIPTION .................... 177

4

5

2. REAR VIEW MONITOR SYSTEM

PRECAUTIONS......................... 178

AREA DISPLAYED ON SCREEN........ 178

THE CAMERA ..................................... 178

DIFFERENCES BETWEEN

THE SCREEN AND

THE ACTUAL ROAD......................... 179

WHEN APPROACHING

THREE-DIMENSIONAL OBJECTS... 181

6

7

8

3. THINGS YOU SHOULD

KNOW ....................................... 183

IF YOU NOTICE ANY SYMPTOMS .... 183

9

1

175

1. REAR VIEW MONITOR SYSTEM

1. REAR VIEW MONITOR SYSTEM

The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking.

INFORMATION

The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen.

DRIVING PRECAUTIONS

The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to visually check all around the vehicle both directly and using the mirrors before proceeding. If you do not, you may hit another vehicle, and could possibly cause an accident.

Pay attention to the following precautions when using the rear view monitor system.

WARNING

Never depend on the rear view monitor system entirely when backing up. The image and the position of the guide lines displayed on the screen may differ from the actual state.

Use caution, just as you would when backing up any vehicle.

Be sure to back up slowly, depressing the brake pedal to control vehicle speed.

The instructions given are only guidelines. When and how much to turn the steering wheel will vary according to traffic conditions, road surface conditions, vehicle condition, etc. when parking. It is necessary to be fully aware of this before using the rear view monitor system.

When parking, be sure to check that the parking space will accommodate your vehicle before maneuvering into it.

Do not use the rear view monitor system in the following cases:

• On icy or slick road surfaces, or in snow

• When using tire chains or emergency tires

• When the back door is not closed completely

• On roads that are not flat or straight, such as curves or slopes.

In low temperatures, the screen may darken or the image may become faint.

The image could distort when the vehicle is moving, or you may become unable to see the image on the screen.

Be sure to visually check all around the vehicle both directly and using the mirrors before proceeding.

If the tire sizes are changed, the position of the fixed guide lines displayed on the screen may change.

The camera uses a special lens. The distances between objects and pedestrians that appear in the image displayed on the screen will differ from the actual distances.(

P.179)

176

1. REAR VIEW MONITOR SYSTEM

SCREEN DESCRIPTION

The rear view monitor system screen will be displayed if the shift lever is shifted to the “R” position while the engine switch is in “ON” position.

No.

Display

Vehicle width guide lines

Vehicle center guide line

Distance guide line

Distance guide line

Function

Displays a guide path when the vehicle is being backed straight up.

The displayed width is wider than the actual vehicle width.

This line indicates the estimated vehicle center on the ground.

Shows distance behind the vehicle.

Displays a point approximately 1.5 ft. (0.5 m) (red) from the edge of the bumper.

Shows distance behind the vehicle.

Displays a point approximately 3 ft. (1 m) (blue) from the edge of the bumper.

6

CANCELING REAR VIEW MONITOR SYSTEM

The rear view monitor system is canceled when the shift lever is shifted into any position other than the “R” position.

177

1. REAR VIEW MONITOR SYSTEM

2. REAR VIEW MONITOR SYSTEM PRECAUTIONS

AREA DISPLAYED ON

SCREEN

The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle.

Displayed area

THE CAMERA

The camera for the rear view monitor system is located as shown in the illustration.

Screen

Corners of bumper

The image adjustment procedure for the rear view monitor system screen is the same as the procedure for adjusting the multimedia screen. (

P.39)

INFORMATION

The area displayed on the screen may vary according to vehicle orientation conditions.

Objects which are close to either corner of the bumper or under the bumper cannot be displayed.

The camera uses a special lens. The distance of the image that appears on the screen differs from the actual distance.

Items which are located higher than the camera may not be displayed on the monitor.

USING THE CAMERA

If dirt or foreign matter (such as water droplets, snow, mud, etc.) is adhering to the camera, it cannot transmit a clear image. In this case, flush it with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.

178

1. REAR VIEW MONITOR SYSTEM

NOTICE

The rear view monitor system may not operate properly in the following cases.

• If the back of the vehicle is hit, the position and mounting angle of the camera may change.

• As the camera has a water proof construction, do not detach, disassemble or modify it. This may cause incorrect operation.

• When cleaning the camera lens, flush the camera with a large quantity of water and wipe it with a soft and wet cloth. Strongly rubbing the camera lens may cause the camera lens to be scratched and unable to transmit a clear image.

• Do not allow organic solvent, car wax, window cleaner or a glass coating to adhere to the camera. If this happens, wipe it off as soon as possible.

• If the temperature changes rapidly, such as when hot water is poured on the vehicle in cold weather, the system may not operate normally.

• When washing the vehicle, do not apply intensive bursts of water to the camera or camera area. Doing so may result in the camera malfunctioning.

Do not expose the camera to strong impact as this could cause a malfunction. If this happens, have the vehicle inspected by your Toyota dealer as soon as possible.

DIFFERENCES BETWEEN

THE SCREEN AND THE

ACTUAL ROAD

The distance guide lines and the vehicle width guide lines may not actually be parallel with the dividing lines of the parking space, even when they appear to be so.

Be sure to check visually.

The distances between the vehicle width guide lines and the left and right dividing lines of the parking space may not be equal, even when they appear to be so.

Be sure to check visually.

The distance guide lines give a distance guide for flat road surfaces. In any of the following situations, there is a margin of error between the fixed guide lines on the screen and the actual distance/course on the road.

6

179

1. REAR VIEW MONITOR SYSTEM

WHEN THE GROUND BEHIND

THE VEHICLE SLOPES UP

SHARPLY

The distance guide lines will appear to be closer to the vehicle than the actual distance. Because of this, objects will appear to be farther away than they actually are. In the same way, there will be a margin of error between the guide lines and the actual distance/course on the road.

WHEN THE GROUND BEHIND

THE VEHICLE SLOPES DOWN

SHARPLY

The distance guide lines will appear to be farther from the vehicle than the actual distance. Because of this, objects will appear to be closer than they actually are. In the same way, there will be a margin of error between the guide lines and the actual distance/course on the road.

180

1. REAR VIEW MONITOR SYSTEM

WHEN ANY PART OF THE

VEHICLE SAGS

When any part of the vehicle sags due to the number of passengers or the distribution of the load, there is a margin of error between the fixed guide lines on the screen and the actual distance/ course on the road.

WHEN APPROACHING

THREE-DIMENSIONAL

OBJECTS

The distance guide lines are displayed according to flat surfaced objects

(such as the road). It is not possible to determine the position of three-dimensional objects (such as vehicles) using the vehicle width guide lines and distance guide lines. When approaching a three-dimensional object that extends outward (such as the flatbed of a truck), be careful of the following.

6

A margin of error

181

1. REAR VIEW MONITOR SYSTEM

VEHICLE WIDTH GUIDE LINES

Visually check the surroundings and the area behind the vehicle. In the case shown below, the truck appears to be outside of the vehicle width guide lines and the vehicle does not look as if it hits the truck. However, the rear body of the truck may actually cross over the vehicle width guide lines. In reality if you back up as guided by the vehicle width guide lines, the vehicle may hit the truck.

DISTANCE GUIDE LINES

Visually check the surroundings and the area behind the vehicle. On the screen, it appears that a truck is parking at point B. However, in reality if you back up to point A, you will hit the truck.

On the screen, it appears that A is closest and C is farthest away. However, in reality, the distance to A and C is the same, and B is farther than A and C.

Positions of A, B and C

C

A B

C

B

A

Vehicle width guide lines

182

1. REAR VIEW MONITOR SYSTEM

3. THINGS YOU SHOULD KNOW

IF YOU NOTICE ANY SYMPTOMS

If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check.

If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer.

Symptom

The image is difficult to see

The image is blurry

The image is out of alignment

The fixed guide lines are very far out of alignment

Likely cause

The vehicle is in a dark area

The temperature around the lens is either high or low

The outside temperature is low

There are water droplets on the camera

It is raining or humid

Foreign matter (mud etc.) is adhering to the camera

Sunlight or headlights are shining directly into the camera

The vehicle is under fluorescent lights, sodium lights, mercury lights etc.

Dirt or foreign matter (such as water droplets, snow, mud etc.) is adhering to the camera.

The camera or surrounding area has received a strong impact.

The camera position is out of alignment.

The vehicle is tilted (there is a heavy load on the vehicle, tire pressure is low due to a tire puncture, etc.)

The vehicle is used on an incline.

Solution

Back up while visually checking the vehicle’s surroundings. (Use the monitor again once conditions have been improved.)

The procedure for adjusting the picture quality of the rear view monitor system is the same as the procedure for adjusting the navigation screen. (

P.39)

Flush the camera with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.

Have the vehicle inspected by your Toyota dealer.

Have the vehicle inspected by your Toyota dealer.

If this happens due to these causes, it does not indicate a malfunction.

Back up while visually checking the vehicle’s surroundings.

6

183

1. REAR VIEW MONITOR SYSTEM

184

7

1

PHONE

2

1

PHONE OPERATION

(HANDS-FREE SYSTEM

FOR CELLULAR PHONES)

1. QUICK REFERENCE ................... 186

2. SOME BASICS ............................ 187

REGISTERING/CONNECTING

A Bluetooth

®

PHONE........................ 188

USING THE PHONE SWITCH/

MICROPHONE ................................. 188

VOICE COMMAND SYSTEM.............. 189

ABOUT THE CONTACTS IN THE

CONTACT LIST ................................ 190

WHEN SELLING OR DISPOSING

OF THE VEHICLE............................. 190

3. CALLING ON THE Bluetooth

®

PHONE....................................... 191

BY FAVORITES LIST .......................... 192

BY CALL HISTORY ............................. 192

BY CONTACTS LIST .......................... 193

BY DIAL PAD ...................................... 195

BY OFF HOOK SWITCH ..................... 196

BY “Home” SCREEN ........................... 196

4. RECEIVING ON THE Bluetooth

®

PHONE....................................... 198

INCOMING CALLS .............................. 198

5. TALKING ON THE Bluetooth

®

PHONE....................................... 199

INCOMING CALL WAITING ................ 201

6. Bluetooth

®

PHONE MESSAGE

FUNCTION ................................ 202

MESSAGE INBOX SCREEN ............... 202

DISPLAYING THE MESSAGE INBOX

SCREEN IN A DIFFERENT WAY ..... 203

RECEIVING A MESSAGE ................... 203

CHECKING MESSAGES ..................... 204

REPLYING TO A MESSAGE

(QUICK REPLY) ................................ 205

CALLING THE MESSAGE SENDER... 206

3

4

5

6

2

SETUP

7

1. PHONE/MESSAGE

SETTINGS................................. 207

PHONE/MESSAGE SETTINGS

SCREEN ........................................... 207

“Sound Settings” SCREEN .................. 208

“Contact/Call History Settings”

SCREEN ........................................... 209

“Messaging Settings” SCREEN ........... 217

“Phone Display Settings” SCREEN ..... 218

8

9

3 WHAT TO DO IF...

1. TROUBLESHOOTING ................ 219

185

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

1. QUICK REFERENCE

The phone top screen can be used to make a phone call. The phone screen can be reached by following methods:

Press the

“APPS”

button and select

“Phone”

.

Press the switch on the steering wheel.

Press the button on the control panel.

Several functions are available to operate on each screen that is displayed by selecting the 4 tabs.

Phone operation

Message function

Setting up a phone

Function

Registering/connecting Bluetooth

®

phone

Calling on the Bluetooth

®

phone

Receiving on the Bluetooth

®

phone

Talking on the Bluetooth

®

phone

Using the Bluetooth

®

phone message function

Phone settings

Bluetooth

®

settings

Page

42

191

198

199

202

207

47

186

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

2. SOME BASICS

The hands-free system enables calls to be made and received without having to take your hands off the steering wheel.

This system supports Bluetooth

®

.

Bluetooth

®

is a wireless data system that enables cellular phones to be used without being connected by a cable or placed in a cradle.

The operating procedure of the phone is explained here.

WARNING

While driving, do not use a cellular phone or connect the Bluetooth

®

phone.

Your audio unit is fitted with Bluetooth

® antennas. People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the Bluetooth

® antennas. The radio waves may affect the operation of such devices.

Before using Bluetooth

®

devices, users of any electrical medical device other than implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.

INFORMATION

If your cellular phone does not support

Bluetooth

®

, this system cannot function.

In the following conditions, the system may not function:

• The cellular phone is turned off.

• The current position is outside the communication area.

• The cellular phone is not connected.

• The cellular phone has a low battery.

When using Bluetooth

®

audio and hands-free at the same time, the following problems may occur:

• The Bluetooth

®

connection may be cut.

• Noise may be heard on the Bluetooth

® audio playback.

7

NOTICE

Do not leave your cellular phone in the vehicle. The temperature inside may rise to a level that could damage the phone.

187

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

REGISTERING/CONNECTING

A Bluetooth

®

PHONE

To use the hands-free system for cellular phones, it is necessary to register a cellular phone with the system.

(

P.42)

Bluetooth

®

PHONE CONDITION

DISPLAY

The condition of the Bluetooth

®

phone appears on the upper right side of the screen. (

P.18)

USING THE PHONE SWITCH/

MICROPHONE

Steering switch

By pressing the phone switch, a call can be received or ended without taking your hands off the steering wheel.

Volume control switch

Press the switch to increase or decrease the volume during a phone call.

Off hook switch

On hook switch

Microphone

The microphone is used when talking on the phone.

188

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

VOICE COMMAND SYSTEM

Press this switch to operate the voice command system.

The voice command system and its list of commands can be operated.

(

P.160)

INFORMATION

The other party’s voice will be heard from the front speakers. The audio system will be muted during phone calls or when hands-free voice commands are used.

Talk alternately with the other party on the phone. If both parties speak at the same time, the other party may not hear what has been said. (This is not a malfunction.)

Keep call volume down. Otherwise, the other party’s voice may be audible outside the vehicle and voice echo may increase. When talking on the phone, speak clearly towards the microphone.

The other party may not hear you clearly when:

• Driving on an unpaved road. (Making excessive traffic noise.)

• Driving at high speeds.

• The windows are open.

• The air conditioning vents are pointed towards the microphone.

• The sound of the air conditioning fan is loud.

• There is a negative effect on sound quality due to the phone and/or network being used.

7

189

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

ABOUT THE CONTACTS IN

THE CONTACT LIST

The following data is stored for every registered phone. When another phone is connected, the following registered data of the previously connected phone cannot be read:

• Contact data

• Call history data

• Favorites data

• Image data

• All phone settings

• Message settings

INFORMATION

When a phone’s registration is deleted, the above-mentioned data is also deleted.

WHEN SELLING OR

DISPOSING OF THE VEHICLE

A lot of personal data is registered when the hands-free system is used.

When selling or disposing of the vehicle, initialize the data.

( →

P.58

)

The following data in the system can be initialized:

• Contact data

• Call history data

• Favorites data

• Image data

• All phone settings

• Message settings

INFORMATION

Once initialized, the data and settings will be erased. Pay careful attention when initializing the data.

190

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

3. CALLING ON THE Bluetooth

®

PHONE

After a Bluetooth

®

phone has been registered, a call can be made using the hands-free system. There are several methods by which a call can be made, as described below.

1

Press the

“APPS”

button.

How to make a call list

By favorites list

By call history

By contacts list

By dial pad

By e-mail/SMS/MMS

By POI call*

By off hook switch

By Entune App Suite*

By voice command system

By “Home” screen

*: Entune Premium Audio only

2

3

Select

“Phone”

.

Select the desired tab to call from.

Page

192

192

193

195

206

239

196

306

164

196

7

The phone top screen can be displayed by pressing the wheel.

switch on the steering

191

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

BY FAVORITES LIST BY CALL HISTORY

1

Calls can be made using registered contacts which can be selected from a contact list. (

P.214)

2

Display the phone top screen.

(

P.191)

Select the

“Favorites”

tab and select the desired contact.

Up to 30 of the latest call history items

(missed, incoming and outgoing) can be selected from the “Call History” tab.

1

2

Display the phone top screen.

(

P.191)

Select the

“Call History”

tab and select or the desired contact.

3

4

Select the desired number.

Check that the “Call” screen is displayed.

The icons of call type are displayed.

: Missed call

: Incoming call

: Outgoing call

3

4

When is selected

3

Check that the “Call” screen is displayed.

When the desired contact is selected

Select the desired number.

Check that the “Call” screen is displayed.

192

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

INFORMATION

When making a call to the same number continuously, only the most recent call is listed in call history.

When a phone number registered in the contact list is received, the name is displayed.

Number-withheld calls are also memorized in the system.

International phone calls may not be made depending on the type of cellular phone you have.

The list should group together consecutive entries with the same phone number and same call type. For example, two calls from Kay Rowles’s mobile would be displayed as follows: Kay Rowles (2)

BY CONTACTS LIST

Calls can be made by using contact data which is transferred from a registered cellular phone. (

P.194)

Up to 2500 contacts (maximum of 4 phone numbers and e-mail addresses per contact) can be registered in the contact list.

1

2

Display the phone top screen.

(

P.191)

Select the

“Contacts”

tab and select the desired contact.

7

3

4

Select the desired number.

Check that the “Call” screen is displayed.

193

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

WHEN THE CONTACT IS

EMPTY

FOR PBAP COMPATIBLE

Bluetooth

®

PHONES

When “Automatic Contact/History

Transfer” is set to off (

P.209)

1

Display the phone top screen.

(

P.191)

2

Select the desired item.

The following screen will not display when transferring from a hands-free mode.

FOR PBAP INCOMPATIBLE BUT

OPP COMPATIBLE Bluetooth

®

PHONES

1

Display the phone top screen.

(

P.191)

2

Select the desired item.

No.

Function

Select to transfer new contacts from a cellular phone, select

“Always”

and then enable “Automatic Contact/History Transfer”.

Select to transfer all the contacts from a connected cellular phone only once.

Select to cancel transferring.

No.

Function

Select to transfer the contacts from the connected cellular phone.

Select to add a new contact manually.

Select to cancel transferring.

When “Transfer” is selected

3

Follow the steps in “FOR PBAP IN-

COMPATIBLE BUT OPP COMPATI-

BLE Bluetooth

®

“STEP 2”. (

P.210)

PHONES” from

When “Add” is selected

3

Follow the steps in “REGISTERING A

NEW CONTACT TO THE CONTACT

LIST” from “STEP 2”. (

P.211)

194

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

INFORMATION

Manual transfer operation cannot be performed while driving.

If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred.

Depending on the type of Bluetooth

® phone:

• It may be necessary to perform additional steps on the phone when transferring contact data.

• The registered image in the contact list may not transfer depending on the type of Bluetooth

®

phone connected.

BY DIAL PAD

This operation cannot be performed while driving.

1

2

Display the phone top screen.

(

P.191)

Select the

“Dial Pad”

tab and enter the phone number.

3

Select or press the on the steering wheel.

4

switch

Check that the “Call” screen is displayed.

7

INFORMATION

Depending on the type of Bluetooth

® phone being connected, it may be necessary to perform additional steps on the phone.

195

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

BY OFF HOOK SWITCH

Calls can be made using the latest call history item.

1

Press the switch on the steering wheel to display the phone top screen.

2

Press the switch on the steering wheel to display the “Call History” screen.

3

Press the switch on the steering wheel to call the latest history item.

4

Check that the “Call” screen is displayed.

BY “Home” SCREEN

When the phone screen is on the

“Home” screen.

1

Press the

“HOME”

button.

2

3

Select the desired contact.

Check that the “Call” screen is displayed.

INFORMATION

If “No phone connected.” is displayed on the screen, a registered phone is not connected to the system. To connect a registered phone, select the “Select

Phone”.

196

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

REGISTERING A NEW

CONTACT ON THE “Home”

SCREEN

1

Select and hold one of the contact button on the screen.

2

Enter the name and phone number.

INFORMATION

If there is no contact in the contacts list, the contacts cannot be registered at the home screen.

The contact cannot be registered at the home screen while driving.

7

197

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

4. RECEIVING ON THE Bluetooth

®

PHONE

INCOMING CALLS

When a call is received, this screen is displayed with a sound.

1

Select or press the switch on the steering wheel to talk on the phone.

To refuse to receive the call

: Select

or press the ing wheel.

switch on the steer-

To adjust the volume of a received call

:

Turn the

“PWR·VOL”

knob, or use the volume control switch on the steering wheel.

INFORMATION

During international phone calls, the other party’s name or number may not be displayed correctly depending on the type of cellular phone you have.

The incoming call display mode can be set. (

P.218)

The ringtone that has been set in the

“Sound Settings” screen sounds when there is an incoming call. Depending on the type of Bluetooth

®

phone, both the multimedia system and Bluetooth

® phone may sound simultaneously when there is an incoming call. (

P.208)

198

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

5. TALKING ON THE Bluetooth

®

PHONE

While talking on the phone, this screen is displayed. The operations outlined below can be performed on this screen.

INFORMATION

Changing from hands-free call to cellular phone call is not possible while driving.

When cellular phone call is changed to hands-free call, the hands-free screen will be displayed and its functions can be operated on the screen.

Changing between cellular phone call and hands-free call can be performed by operating the cellular phone directly.

Transferring methods and operations will be different depending on the type of cellular phone you have.

For the operation of the cellular phone, see the manual that comes with it.

No.

Function

Select to display the dial pad to send tones.

Select to mute your voice to the other party.

Select to change handset modes between handsfree and cellular phone.

Select to adjust your voice volume that the other party hears from their speaker.

Select to send tones. This button only appears when a number that contains a

(w) is dialed in hands-free mode.

Select to hang up the phone.

Select

“+”

or

“-”

to adjust the volume of the other party’s voice.

Select to start talking with the other party.

Page

199

200

200

201

SENDING TONES

BY DIAL PAD

This operation cannot be performed while driving.

1

Select

“0-9”

.

2

Enter the desired number.

7

199

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

BY SELECTING “Release Tones”

“Release Tones”

appear when a continuous tone signal(s) containing a (w) is registered in the contact list.

This operation can be performed while driving.

1

Select

“Release Tones”

.

INFORMATION

A continuous tone signal is a character string that consists of numbers and the characters p or w. (e.g.

056133w0123p#1

)

When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent after a user operation is performed.

Release tones can be used when automated operation of a phone based service such as an answering machine or bank phone service is desired. A phone number with continuous tone signals can be registered in the contact list.

Tone data after a “w” pause tone can be operated on voice command during a call.

TRANSMIT VOLUME SETTING

1

2

Select

“Transmit Volume”

.

Select the desired level for the transmit volume.

3

Select

“OK”

.

INFORMATION

The sound quality of the voice heard from the other party’s speaker may be negatively impacted.

To reset the transmit volume, select

“Default”

.

“Transmit Volume” is dimmed when mute is on.

200

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

INCOMING CALL WAITING

When a call is interrupted by a third party while talking, this screen is displayed.

1

Select or press the switch on the steering wheel to start talking with the other party.

To refuse to receive the call

: Select

or press the ing wheel.

switch on the steer-

Each time is selected or the switch on the steering wheel is pressed during an interrupted call, the party who is on hold will be switched.

INFORMATION

This function may not be available depending on the type of cellular phone.

7

201

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

6. Bluetooth

®

PHONE MESSAGE FUNCTION

Received messages can be forwarded from the connected Bluetooth

®

phone, enabling checking and replying using the multimedia system.

Depending on the type of Bluetooth

® phone connected, received messages may not be transferred to the message inbox.

If the phone does not support the message function, this function cannot be used.

1

Press the

“APPS”

button.

MESSAGE INBOX SCREEN

: Select to change to phone mode.

Function

Receiving a message

Checking messages

Replying to a message (quick reply)

Calling the message sender

Message settings

Page

203

204

205

206

217

2

Select

“Messages”

.

202

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

DISPLAYING THE MESSAGE

INBOX SCREEN IN A

DIFFERENT WAY

1

Display the phone top screen.

(

P.191)

2

Select .

RECEIVING A MESSAGE

When an e-mail/SMS/MMS is received, the incoming message screen pops up with sound and is ready to be operated on the screen.

The phone top screen can be displayed by pressing the wheel.

switch on the steering

No.

Function

E-mail:

Select to check the message.

Select to not open the message.

Select to call the message sender.

7

INFORMATION

Depending on the cellular phone used for receiving messages, or its registration status with the multimedia system, some information may not be displayed.

The pop up screen is separately available for incoming e-mail and SMS/MMS messages under the following conditions:

E-mail:

• “Incoming E-mail Display” is set to “Full

Screen”. (

P.217)

• “E-mail Notification Popup” is set to on.

(

P.217)

SMS/MMS:

• “Incoming SMS/MMS Display” is set to

“Full Screen”. (

P.217)

• “SMS/MMS Notification Popup” is set to on. (

P.217)

203

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

CHECKING MESSAGES

1

2

Display the message inbox screen.

(

P.202)

Select the desired message from the list.

3

Check that the message is displayed.

INFORMATION

Reading a text message is not available while driving.

Depending on the type of Bluetooth

® phone being connected, it may be necessary to perform additional steps on the phone.

Messages are displayed in the appropriate connected Bluetooth

® phone’s registered mail address folder.

Select the tab of the desired folder to be displayed.

Only received messages on the connected Bluetooth

®

phone can be displayed.

The text of the message is not displayed while driving.

Turn the

“PWR·VOL”

knob, or use the volume control switch on the steering wheel to adjust the message read out volume during message playback.

No.

Function

E-mail:

Select

“Mark Unread”

or

“Mark

Read”

to mark mail unread or read on the message inbox screen.

This function is available when “Update Message Read Status on

Phone” is set to on. (

P.217)

Select to reply the message.

(

P.205)

Select to display the previous or next message.

Select to have messages read out.

To cancel this function, select

“Stop”

.

When “Automatic Message Readout” is set to on, messages will be automatically read out. (

P.217)

Select to make a call to the sender.

204

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

REPLYING TO A MESSAGE

(QUICK REPLY)

15 messages have already been stored.

1

2

Display the message inbox screen.

(

P.202)

Select the desired message from the list.

3

Select

“Quick Message”

.

EDITING QUICK REPLY MESSAG-

ES

This operation cannot be performed while driving.

1

Select

“Quick Message”

.

4

Select the desired message.

5

Select

“Send”

.

While the message is being sent, a sending message screen is displayed.

To cancel sending the message, select

“Cancel”

.

2

Select corresponding to the desired message to edit.

3

Select

“OK”

when editing is completed.

7

INFORMATION

To reset the edited quick reply messages, select

“Default”

.

Entune Premium Audio

“Quick Message 1” (“I am driving and will arrive in approximately [ETA] minutes.”)

:

This message cannot be edited and will automatically fill in [ETA] with the navigation calculated estimated time of arrival on the confirm message screen.

If there are waypoints set, [ETA] to the next waypoint will be shown.

If there is no route currently set in the navigation system, “Quick Message 1” cannot be selected.

205

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

CALLING THE MESSAGE

SENDER

Calls can be made to an e-mail/SMS/

MMS message sender’s phone number.

This operation can be performed while driving.

CALLING FROM E-MAIL/SMS/MMS

MESSAGE DISPLAY

1

Display the message inbox screen.

(

P.202)

2

Select the desired message.

3

Select .

CALLING FROM A NUMBER WITH-

IN A MESSAGE

Calls can be made to a number identified in a message’s text area.

This operation cannot be performed while driving.

1

2

3

Display the message inbox screen.

(

P.202)

Select the desired message.

Select the text area.

If there are 2 or more phone numbers, select the desired number.

4

Check that the “Call” screen is displayed.

4

Select the desired number.

Identified phone numbers contained in the message are displayed.

5

Check that the “Call” screen is displayed.

INFORMATION

A series of numbers may be recognized as a phone number. Additionally, some phone numbers may not be recognized, such as those for other countries.

CALLING FROM THE INCOMING

MESSAGE SCREEN

P.203

206

2. SETUP

1. PHONE/MESSAGE SETTINGS

1

Press the

“APPS”

button.

DISPLAYING THE PHONE/

MESSAGE SETTINGS SCREEN

IN A DIFFERENT WAY

1

2

Display the phone top screen.

(

P.191)

Select

“Settings”

.

2

3

4

Select

“Setup”

.

Select

“Phone”

.

Select the item to be set.

PHONE/MESSAGE SETTINGS

SCREEN

7

No.

Information

Registering/connecting a phone

Sound settings

Page

42

208

Contact/call history settings

Messaging settings

209

217

Phone display settings

218

207

2. SETUP

“Sound Settings” SCREEN

The call and ringtone volume can be adjusted. A ringtone can be selected.

1

2

3

Display the “Phone/Message Settings” screen. (

P.207)

Select

“Sound Settings”

.

Select the desired item to be set.

No.

Function

Select to set the desired ringtone.

Select

“-”

or

“+”

to adjust the ringtone volume.

Select

“-”

or

“+”

to adjust the message readout volume.

Select to set the desired incoming

SMS/MMS tone.

Select

“-”

or

“+”

to adjust the incoming SMS/MMS tone volume.

Select to set the desired incoming email tone.

Select

“-”

or

“+”

to adjust the incoming e-mail tone volume.

Select

“-”

or

“+”

to adjust the default volume of the other party’s voice.

Select to reset all setup items.

INFORMATION

Depending on the type of phone, certain functions may not be available.

208

2. SETUP

“Contact/Call History

Settings” SCREEN

The contact can be transferred from a

Bluetooth

®

phone to the system. The contact also can be added, edited and deleted.

The call history can be deleted and contact and favorites can be changed.

1

2

Display the “Phone/Message Settings” screen. (

P.207)

Select

tings”

.

“Contact/Call History Set-

3

Select the desired item to be set.

No.

*

*

*

*

Function

For PBAP compatible Bluetooth

®

phones, select to set automatic contact/history transfer on/off. When set to on, the phone’s contact data and history are automatically transferred.

Select to update contacts from the connected phone.

Select to sort contacts by the first name or last name field.

Select to add contacts to the favorites list.

Select to delete contacts from the favorites list.

Select to set the transferred contact image display on/off.

Select to clear contacts from the call history.

Select to add new contacts to the contact list.

Select to edit contacts in the contact list.

Select to delete contacts from the contact list.

Select to reset all setup items.

Page

210

214

216

211

212

213

*: For PBAP compatible Bluetooth

® phones, this function is available when

“Automatic Contact/History Transfer” is set to off. (

P.209)

7

209

2. SETUP

INFORMATION

Depending on the type of phone, certain functions may not be available.

Contact data is managed independently for every registered phone. When one phone is connected, another phone’s registered data cannot be read.

UPDATE CONTACTS FROM

PHONE

Operation methods differ between

PBAP compatible and PBAP incompatible/OPP compatible Bluetooth

® phones.

If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred.

FOR PBAP COMPATIBLE

Bluetooth

®

PHONES

1

Select

“Update Contacts from

Phone”

.

Contacts are transferred automatically.

2

Check that a confirmation screen is displayed when the operation is complete.

This operation may be unnecessary depending on the type of cellular phone.

Depending on the type of cellular phone,

OBEX authentication may be required when transferring contact data. Enter

“1234” into the Bluetooth

®

phone.

If another Bluetooth

®

device is connected when transferring contact data, depending on the phone, the connected Bluetooth

® device may need to be disconnected.

Depending on the type of Bluetooth

® phone being connected, it may be necessary to perform additional steps on the phone.

FOR PBAP INCOMPATIBLE BUT

OPP COMPATIBLE Bluetooth

®

PHONES

This operation cannot be performed while driving.

1

Select

Phone”

.

“Update Contacts from

2

Transfer the contact data to the system using a Bluetooth

®

phone.

This operation may be unnecessary depending on the type of cellular phone.

Depending on the type of cellular phone,

OBEX authentication may be required when transferring contact data. Enter

“1234” into the Bluetooth

®

phone.

To cancel this function, select

“Cancel”

.

3

Check that a confirmation screen is displayed when the operation is complete.

210

2. SETUP

UPDATING THE CONTACTS IN A

DIFFERENT WAY (FROM THE “Call

History” SCREEN)

For PBAP compatible Bluetooth

® phones, this function is available when

“Automatic Contact/History Transfer” is set to off.

(

P.209)

1

2

Display the phone top screen.

(

P.191)

Select the

“Call History”

tab and select a contact not yet registered in the contact list.

3

4

5

Select

“Update Contact”

.

Select the desired contact.

Select a phone type for the phone number.

REGISTERING A NEW

CONTACT TO THE CONTACT

LIST

1

2

3

New contact data can be registered.

Up to 4 numbers per person can be registered. For PBAP compatible

Bluetooth

®

phones, this function is available when “Automatic Contact/

History Transfer” is set to off. (

P.209)

Select

“New Contact”

.

Enter the name and select

“OK”

.

Enter the phone number and select

“OK”

.

4

Select the phone type for the phone number.

5

To add another number to this contact, select

“Yes”

.

7

211

2. SETUP

3

4

REGISTERING A NEW CONTACT IN

A DIFFERENT WAY (FROM THE

“Call History” SCREEN)

1

2

Display the phone top screen.

(

P.191)

Select the

“Call History”

tab and select a contact not yet registered in the contact list.

Select

“Add to Contacts”

.

Follow the steps in “REGISTERING A

NEW CONTACT TO THE CONTACT

LIST” from “STEP 2”. (

P.211)

EDITING THE CONTACT DATA

1

2

For PBAP compatible Bluetooth

® phones, this function is available when

“Automatic Contact/History Transfer” is set to off. (

P.209)

Select

“Edit Contacts”

.

Select the desired contact.

3

Select corresponding to the desired name or number.

For editing the name

4

Follow the steps in “REGISTERING A

NEW CONTACT TO THE CONTACT

LIST” from “STEP 2”. (

P.211)

For editing the number

4

Follow the steps in “REGISTERING A

NEW CONTACT TO THE CONTACT

LIST” from “STEP 3”. (

P.211)

212

2. SETUP

EDITING THE CONTACT IN A DIF-

FERENT WAY (FROM THE “Contact

Details” SCREEN)

1

2

Display the phone top screen.

(

P.191)

Select the

“Contacts”

,

“Call history”

tab or the

“Favorites”

tab and select the desired contact.

3

Select

“Edit Contact”

.

DELETING THE CONTACT

DATA

For PBAP compatible Bluetooth

® phones, this function is available when

“Automatic Contact/History Transfer” is set to off. (

P.209)

1

2

Select

“Delete Contacts”

.

Select the desired contact and select

“Delete”

.

3

Select

“Yes”

when the confirmation screen appears.

INFORMATION

Multiple data can be selected and deleted at the same time.

“E-mail Addresses”

: Select to display all registered e-mail addresses for the contact.

4

Follow the steps in “EDITING THE

CONTACT DATA” from “STEP 4”.

(

P.212)

7

213

2. SETUP

3

4

DELETING THE CONTACT IN A DIF-

FERENT WAY (FROM THE “Contact

Details” SCREEN)

1

2

Display the phone top screen.

(

P.191)

Select the

“Contacts”

,

“Call history”

tab or the

“Favorites”

tab and select the desired contact.

Select

“Delete Contact”

.

Select

“Yes”

when the confirmation screen appears.

FAVORITES LIST SETTING

Up to 15 contacts (maximum of 4 numbers per contact) can be registered in the favorites list.

1

2

REGISTERING THE CONTACTS IN

THE FAVORITES LIST

Select

“Add Favorite”

.

Select the desired contact to add to the favorites list.

INFORMATION

When a Bluetooth

®

phone is deleted, the contact data will be deleted at the same time.

Dimmed contacts are already stored as a favorite.

3

Check that a confirmation screen is displayed when the operation is complete.

214

2. SETUP

When 15 contacts have already been registered to the favorites list

1

When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced.

Select

“Yes”

when the confirmation screen appears to replace a contact.

2

Select the contact to be replaced.

2

3

Registering contacts in the favorites list in a different way (from the “Contacts” screen)

1

Display the phone top screen.

(

P.191)

Select the

“Contacts”

tab.

Select

at the beginning of the desired contact list name to be registered in the favorites list.

3

Check that a confirmation screen is displayed when the operation is complete.

3

4

When selected,

is changed to

, and the contact is registered in the favorites list.

Registering contacts in the favorites list in a different way (from the “Contact Details” screen)

1

Display the phone top screen.

(

P.191)

2

Select the

“Contacts”

tab or the

“Call

History”

tab and select the desired contact.

Select

“Add Favorite”

.

Check that a confirmation screen is displayed when the operation is complete.

7

215

2. SETUP

1

2

DELETING THE CONTACTS IN THE

FAVORITES LIST

Select

“Remove Favorite”

.

Select the desired contacts and select

“Remove”

.

2

3

Deleting contacts in the favorites list in a different way (from the “Contacts” screen)

1

Display the phone top screen.

(

P.191)

Select the

“Contacts”

tab.

Select

at the beginning of the contact list name to be deleted from the favorites list.

3

Select

“Yes”

when the confirmation screen appears.

4

Check that a confirmation screen is displayed when the operation is complete.

3

4

When selected,

 is changed to

, and the data is deleted from the list.

Deleting contacts in the favorites list in a different way (from the “Contact Details” screen)

1

Display the phone top screen.

(

P.191)

2

Select the

“Contacts”

,

“Call history”

tab or the

“Favorites”

tab and select the desired contact to delete.

Select

“Remove Favorite”

.

Select

“Yes”

when the confirmation screen appears.

5

Check that a confirmation screen is displayed when the operation is complete.

216

2. SETUP

“Messaging Settings”

SCREEN

1

2

3

Display the “Phone/Message Settings” screen. (

P.207)

Select

“Messaging Settings”

.

Select the desired item to be set.

No.

Function

Select to set automatic message transfer on/off.

Select to set automatic message readout on/off.

Select to set the SMS/MMS notification popup on/off.

Select to set the e-mail notification popup on/off.

Select to set adding the vehicle signature to outgoing messages on/off.

Select to set updating message read status on phone on/off.

Select to change the incoming SMS/

MMS display.

“Full Screen”

: When an SMS/MMS message is received, the incoming

SMS/MMS display screen is displayed and can be operated on the screen.

“Drop-down”

: When an SMS/MMS message is received, a message is displayed on the upper side of the screen.

Select to change the incoming e-mail display.

“Full Screen”

: When an e-mail is received, the incoming e-mail display screen is the displayed and can be operated on the screen.

“Drop-down”

: When an e-mail is received, a message is displayed on the upper side of the screen.

Select to set display of messaging account names on the inbox tab on/off.

When set to on, messaging account names used on the cellular phone will be displayed.

Select to reset all setup items.

7

217

2. SETUP

INFORMATION

Depending on the phone, these functions may not be available.

DISPLAYING THE “Messaging

Settings” SCREEN IN A

DIFFERENT WAY

1

Display the phone top screen.

(

P.191)

2

3

Select .

Select

“Settings”

.

“Phone Display Settings”

SCREEN

1

2

3

Display the “Phone/Message Settings” screen. (

P.207)

Select

“Phone Display Settings”

.

Select the desired item to be set.

No.

Function

Select to change the incoming call display.

“Full Screen”

: When a call is received, the hands-free screen is displayed and can be operated on the screen.

“Drop-down”

: A message is displayed on the upper side of the screen.

Select to set display of the contact/ history transfer completion message on/off.

Select to reset all setup items.

INFORMATION

Depending on the phone, these functions may not be available.

218

3. WHAT TO DO IF...

1. TROUBLESHOOTING

If there is a problem with the hands-free system or a Bluetooth

®

device, first check the table below.

When using the hands-free system with a Bluetooth

®

device

Symptom Likely cause Solution

Page

Cellular phone

This system

The hands-free system or Bluetooth

® device does not work.

The connected device may not be a compatible

Bluetooth

® phone.

cellular

The Bluetooth

®

version of the connected cellular phone may be older than the specified version.

For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http:// www.toyota.com/ entune/

Use a cellular phone with Bluetooth

®

version 2.0 or higher

(recommended: Ver.

3.0 +EDR or higher).

44

7

219

3. WHAT TO DO IF...

When registering/connecting a cellular phone

Symptom Likely cause Solution

A cellular phone cannot be registered.

A Bluetooth

®

connection cannot be made.

An incorrect passcode was entered on the cellular phone.

The registration operation has not been completed on the cellular phone side.

Old registration information remains on either this system or the cellular phone.

Another Bluetooth

® device is already connected.

Bluetooth

®

function is not enabled on the cellular phone.

Automatic

Bluetooth

®

connection on this system is set to off.

Enter the correct passcode on the cellular phone.

Complete the registration operation on the cellular phone

(approve registration on the phone).

Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system.

Manually connect the cellular phone you wish to use to this system.

Enable the

Bluetooth

®

function on the cellular phone.

Set automatic

Bluetooth

®

connection on this system to on when the engine switch is in the “ACC” or “ON” position.

Page

Cellular phone

This system

∗ ⎯

49

50

54

220

3. WHAT TO DO IF...

Symptom Likely cause Solution

Page

Cellular phone

This system

“Unable to dial.

Please check your phone.”

Bluetooth

®

function is not enabled on the cellular phone.

Old registration information remains on either this system or the cellular phone.

Enable the

Bluetooth

®

function on the cellular phone.

Delete the existing registration information from both this system and the cellular phone, then register the cellular phone you wish to connect to this system.

When making/receiving a call

49

Symptom Likely cause Solution

A call cannot be made/received.

Your vehicle is in a

“No Service” area.

Move to where “No

Service” no longer appears on the display.

Page

Cellular phone

This system

7

⎯ ⎯

221

3. WHAT TO DO IF...

When using the contacts

Symptom Likely cause Solution

The profile version of the connected cellular phone may not be compatible with transferring contact data.

For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http:// www.toyota.com/ entune/

Contact data cannot be transferred manually/automatically.

Automatic contact transfer function on this system is set to off.

Set automatic contact transfer function on this system to on.

Passcode has not been entered on the cellular phone.

Transfer operation on the cellular phone has not completed.

Enter the passcode on the cellular phone if requested (default passcode: 1234).

Complete transfer operation on the cellular phone (approve transfer operation on the phone).

Contact data cannot be edited.

Automatic contact transfer function on this system is set to on.

Set automatic contact transfer function on this system to off.

Page

Cellular phone

This system

209

209

222

3. WHAT TO DO IF...

When using the Bluetooth

®

message function

Symptom Likely cause Solution

Page

Cellular phone

This system

Message transfer is not enabled on the cellular phone.

Messages cannot be viewed.

New message notifications are not displayed.

In other situations

Automatic transfer function on this system is set to off.

Notification of SMS/

MMS/E-mail reception on this system is set to off.

Automatic message transfer function is not enabled on the cellular phone.

Enable message transfer on the cellular phone (approve message transfer on the phone).

Set automatic transfer function on this system to on.

Set notification of

SMS/MMS/E-mail reception on this system to on.

Enable automatic transfer function on the cellular phone.

217

217

Symptom Likely cause Solution

The Bluetooth

®

connection status is displayed at the top of the screen each time the engine switch is in the “ACC” or “ON” position.

Connection confirmation display on this system is set to on.

To turn off the display, set connection confirmation display on this system to off.

Page

Cellular phone

This system

52

7

223

3. WHAT TO DO IF...

Symptom Likely cause Solution

Page

Cellular phone

This system

Even though all conceivable measures have been taken, the symptom status does not change.

The cellular phone is not close enough to this system.

The cellular phone is the most likely cause of the symptom.

Bring the cellular phone closer to this system.

Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular phone.

Enable the cellular phone’s Bluetooth

® connection.

Stop the cellular phone’s security software and close all applications.

Before using an application installed on the cellular phone, carefully check its source and how its operation might affect this system.

: For details, refer to the owner’s manual that came with the cellular phone.

224

3. WHAT TO DO IF...

7

225

8

NAVIGATION SYSTEM*

1

BASIC OPERATION

2

DESTINATION SEARCH

1. QUICK REFERENCE ................... 228

MAP SCREEN ..................................... 228

NAVIGATION OPTIONS SCREEN...... 230

2. MAP SCREEN OPERATION ....... 231

CURRENT POSITION DISPLAY ......... 231

MAP SCALE ........................................ 231

ORIENTATION OF THE MAP ............. 232

SWITCHING THE MAP MODE............ 233

SCREEN SCROLL OPERATION ........ 235

ADJUSTING LOCATION IN SMALL

INCREMENTS................................... 236

3. MAP SCREEN INFORMATION ... 237

DISPLAYING MAP INFORMATION .... 237

DISPLAYING INFORMATION

ABOUT THE ICON WHERE

THE CURSOR IS SET ...................... 239

STANDARD MAP ICONS .................... 240

4. TRAFFIC INFORMATION ............ 241

DISPLAYING TRAFFIC

INFORMATION ON THE MAP.......... 243

1. DESTINATION SEARCH

SCREEN .................................... 244

2. SEARCH OPERATION................ 246

SELECTING SEARCH AREA .............. 247

SETTING HOME AS DESTINATION ... 247

SETTING PRESET DESTINATIONS

AS DESTINATION............................. 247

SEARCHING BY ADDRESS................ 248

SEARCHING BY POINT

OF INTEREST ................................... 249

SEARCHING FROM PREVIOUS

DESTINATIONS ................................ 253

SEARCHING BY ADDRESS BOOK .... 253

SEARCHING BY EMERGENCY .......... 254

SEARCHING BY INTERSECTION

AND FREEWAY ................................ 254

SEARCHING BY MAP ......................... 256

SEARCHING BY COORDINATES....... 256

3. STARTING ROUTE

GUIDANCE................................ 257

STARTING ROUTE GUIDANCE.......... 257

PAUSING GUIDANCE ......................... 260

226

8

NAVIGATION SYSTEM

*

2

3

ROUTE GUIDANCE

5

SETUP

3

1. ROUTE GUIDANCE SCREEN ..... 261

SCREEN FOR ROUTE GUIDANCE ... 261

ROUTE OVERVIEW............................ 262

DURING FREEWAY DRIVING............ 263

WHEN APPROACHING

INTERSECTION ............................... 264

TURN LIST SCREEN .......................... 265

TURN-BY-TURN ARROW SCREEN... 265

2. TYPICAL VOICE GUIDANCE

PROMPTS.................................. 266

3. EDITING ROUTE ......................... 267

ADDING DESTINATIONS ................... 268

REORDERING DESTINATIONS......... 268

DELETING DESTINATIONS ............... 268

SETTING ROUTE PREFERENCES ... 268

SELECTING ROUTE TYPE ................ 269

DETOUR SETTING ............................. 269

4

MEMORY POINTS

1. DETAILED NAVIGATION

SETTINGS................................. 280

SCREENS FOR NAVIGATION

SETTINGS ........................................ 280

4

5

2. TRAFFIC SETTINGS................... 284

SCREEN FOR TRAFFIC

SETTINGS ........................................ 284

AUTO AVOID TRAFFIC....................... 285

MY TRAFFIC ROUTES ....................... 286

6

7

6

TIPS FOR THE NAVIGATION

SYSTEM

8

1. GPS (GLOBAL POSITIONING

SYSTEM)................................... 290

LIMITATIONS OF

THE NAVIGATION SYSTEM ............ 290

9

2. MAP DATABASE VERSION

AND COVERED AREA ............. 292

MAP INFORMATION ........................... 292

ABOUT THE MAP DATA ..................... 293

1. MEMORY POINTS SETTINGS .... 271

SETTING UP HOME ........................... 272

SETTING UP PRESET

DESTINATIONS................................ 273

SETTING UP ADDRESS BOOK ......... 275

SETTING UP AREAS TO AVOID........ 277

DELETING PREVIOUS

DESTINATIONS................................ 279

1

*: Entune Premium Audio only

227

1. BASIC OPERATION

1. QUICK REFERENCE

MAP SCREEN

To display this screen, press the

“APPS”

button, then select

“Navigation”

on the

“Apps” screen.

228

No.

Name

2D North-up, 2D heading-up or 3D heading-up symbol

Function

Indicates whether the map orientation is set to north-up or heading-up. The letter(s) beside this symbol indicate the vehicle’s heading direction

(e.g. N for north). In 3D map, only a heading-up view is available.

Select to display the “Navigation Options” screen.

Options button

“GPS” mark

(Global Positioning System)

Shows that the vehicle is receiving signals from the GPS.

Traffic indicator

Scale indicator

Shows that traffic information is received. Select to start voice guidance for traffic information.

When traffic information is received via HD, HD mark is displayed on the right.

This figure indicates the map scale.

Page

232

230

290

241

231

1. BASIC OPERATION

No.

Name

Zoom in/out button

Current position button/voice guidance button

Destination button

Function

Select to magnify or reduce the map scale. When either button is selected, the map scale indicator bar appears at the bottom of the screen.

Select to display the current position address.

Select to repeat voice guidance.

Select to display the “Destination” screen.

Speed limit icon

Route information bar

Route information button

Indicates the speed limit on the current road. The display of the speed limit icon can be set to on/off.

Displays the current street name, or the distance with the estimated travel time/arrival time to the destination. The route information bar fills from left to right as the vehicle progresses on the route.

Select to change the display between the current street name and the distance with the estimated travel/arrival time.

Page

231

261

262

231

244

237

8

229

1. BASIC OPERATION

NAVIGATION OPTIONS SCREEN

The navigation options allow you to change map configurations, display/hide POI icons, and edit the navigation routes. To display the “Navigation Options” screen, press the

“APPS”

button, select

“Navigation”

on the “Apps” screen, and select

“Options”

on the map screen.

230

No.

Function

Select to change the map configuration.

Select to change the displayed map information such as POI icons, route trace, speed limit, etc.

Select to display the map version and coverage area.

Select to edit the set route.

Select to pause or resume route guidance.

Select to display the overview of the entire route.

Page

233

237

292

267

260

262

1. BASIC OPERATION

2. MAP SCREEN OPERATION

CURRENT POSITION

DISPLAY

1

Press the

“APPS”

button.

MAP SCALE

1

Select or to change the scale of the map screen.

2

3

Select

“Navigation”

.

Check that the current position map is displayed.

The scale indicator bar appears at the bottom of the screen.

Select and hold or to continue changing the scale of the map screen.

The scale of the map screen can also be changed by selecting the scale bar directly. This function is not available while driving.

8

INFORMATION

The map scale is displayed above the zoom in button at the bottom left of the screen.

To correct the current position manually:

P.282

INFORMATION

While driving, the current position mark is fixed on the screen and the map moves.

The current position is automatically set as the vehicle receives signals from the

GPS (Global Positioning System). If the current position is not correct, it is automatically corrected after the vehicle receives signals from the GPS.

After the battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives signals from the GPS, the correct current position is displayed.

231

1. BASIC OPERATION

ORIENTATION OF THE MAP

The orientation of the map can be changed between 2D north-up, 2D heading-up and 3D heading-up by selecting the orientation symbol displayed at the top left of the screen.

1

North-up screen

: North-up symbol

Regardless of the direction of vehicle travel, north is always up.

: Heading-up symbol

The direction of vehicle travel is always up.

: 3D Heading-up symbol

The direction of vehicle travel is always up.

The letter(s) beside this symbol indicate the vehicle’s heading direction (e.g. N for north).

Heading-up screen

3D screen

232

1. BASIC OPERATION

SWITCHING THE MAP MODE

1

2

3

Select

“Options”

on the map screen.

Select

“Map Mode”

.

Select the desired configuration button.

MAP ONLY

DUAL MAP

No.

Function

Select to display the single map screen.

Select to display the dual map screen.

Select to display the compass mode screen.

Select to display the turn list screen.

Select to display the freeway exit list screen.

Select to display the intersection guidance screen or the guidance screen on the freeway.

Select to display the turnby-turn arrow screen.

Page

233

233

234

265

263

264

265

Depending on the conditions, certain screen configuration buttons cannot be selected.

The map on the left is the main map.

8

233

1. BASIC OPERATION

Editing right map

The right side map can be edited.

1

2

Select any point on the right side map.

Select the desired item.

COMPASS

Information about the destination, current position and a compass is displayed on the screen.

No.

Function

Select to change the orientation of the map.

Select to display POI icons.

Page

232

237

Select to show traffic information.

Select to change the map scale.

241

231

When set to on, the indicator will illuminate.

INFORMATION

The destination mark is displayed in the direction of the destination. When driving, refer to the longitude and latitude coordinates, and the compass, to make sure that the vehicle is headed in the direction of the destination.

When the vehicle travels out of the coverage area, the guidance screen changes to the whole compass mode screen.

234

1. BASIC OPERATION

SCREEN SCROLL

OPERATION

Use the scroll feature to move the desired point to the center of the screen for looking at a point on the map that is different from the current position.

No.

Information/Function

Select to register as a memory point.

To change the icon, name, etc.:

P.275

Select to return to the current position.

To scroll over the map screen, place the cursor mark in the desired position and then press and hold the map screen. The map will continue scrolling in that direction until the finger is released.

No.

Information/Function

Cursor mark

Distance from the current position to the cursor mark.

Select to set as a destination.

When selecting

“Go to ”

on the following map screen, the navigation system performs a search for the route. (

P.257)

If a destination has already been set,

“Go to ”

and

Add to Route”

will be displayed.

“Go to ”

: Select to delete the existing destination(s) and set a new one.

“Add to Route”

: Select to add a destination.

8

235

1. BASIC OPERATION

ADJUSTING LOCATION IN

SMALL INCREMENTS

The cursor location can be adjusted in small increments when

“Adjust Location”

is selected on the setting map screen.

Also, when changing the location of memory points on the editing screen

(

P.279) and adjusting the current po-

sition mark manually on the “Calibration” screen (

P.282), 8 directional

arrows may appear for this purpose.

1

Select one of the 8 directional arrows to move the cursor to the desired point and then select

“OK”

.

236

1. BASIC OPERATION

3. MAP SCREEN INFORMATION

DISPLAYING MAP

INFORMATION

Information such as POI icons, route trace, speed limit, etc. can be displayed on the map screen.

1

2

3

Select

“Options”

on the map screen.

Select

“Map Information”

.

Select the desired items to be displayed.

SELECTING THE POI ICONS

1

Display the “Map Information” screen.

(

P.237)

2

Select

“Select POI”

.

When the POI icons to be displayed on the map screen have already been set,

“Change POI”

is displayed.

3

Select the desired POI category and select

“OK”

.

No.

Function

Select to display the selected POI icons.

Select to select or change

POI icons.

Select to display route trace.

Select to display speed limit icon.

Select to display traffic information.

Page

237

239

241

When set to on, the indicator will illuminate.

No.

Information/Function

Displays up to 5 selected

POI icons on the map screen

Select to cancel the selected POI icons.

Displays up to 6 POI icons as favorite POI categories

Select to display other POI categories if the desired

POIs cannot be found on the screen.

Select to search for the nearest POIs.

Page

281

238

238

8

237

1. BASIC OPERATION

1

2

SELECTING OTHER POI ICONS TO

BE DISPLAYED

Select

“Other POIs”

.

Select the desired POI categories and select

“OK”

.

DISPLAYING THE LOCAL POI LIST

POIs that are within 20 miles (32 km) of the current position will be listed from among the selected categories.

1

2

Select

“Find Local POI”

.

Select the desired POI.

“List All Categories”

: Select to display all

POI categories. To add more POI categories, select

“More”

.

“Near...”

: Select to search for POIs near the current position or along the route.

3

Check that the selected POI is displayed on the map screen. (

P.235)

When

“Near...”

is selected

1

Select the desired item.

“Near Here”

: Select to search for POIs near the current position.

“Along My Route”

: Select to search for

POIs along the route.

238

1. BASIC OPERATION

ROUTE TRACE

The traveled route can be stored and retraced on the map screen. This feature is available when the map scale is

30 miles (50 km) or less.

1

Display the “Map Information” screen.

(

P.237)

2

Select

“Route Trace”

.

The

“Route Trace”

indicator illuminates and the route trace starts.

3

Check that the traveled line is displayed.

DISPLAYING INFORMATION

ABOUT THE ICON WHERE

THE CURSOR IS SET

When the cursor is placed over an icon on the map screen, the name bar is displayed on the upper part of the screen. If

“Info”

appears on the right side of the name bar, detailed information can be displayed.

1

2

Place the cursor over an icon.

Select

“Info”

.

1

2

STOP RECORDING THE ROUTE

TRACE

Select

“Route Trace”

again.

A confirmation screen will be displayed.

“Yes”

: Select to keep the recorded route trace.

“No”

: Select to erase the recorded route trace.

POI information

Memory point information

INFORMATION

The traveled route can be stored up to

124 miles (200 km).

8

239

1. BASIC OPERATION

Destination information

No.

Function

Select to register as a memory point.

To change the icon, name, etc.:

P.275

Select to set as a destination.

Select to call the registered number.

Select to delete destination or memory point.

Select to display the edit memory point screen.

INFORMATION

Even when traffic information is not currently being received, traffic information and

“Info”

will be displayed for a while after traffic information has been received.

STANDARD MAP ICONS

Icon Name

Island

Park

Industry

Business facility

Airport

Military

University

Hospital

Stadium

Shopping mall

Golf

240

1. BASIC OPERATION

4. TRAFFIC INFORMATION

2

3

Traffic data can be received via HD

Radio or Entune App Suite to display traffic information on the map screen.

1

Press the

“APPS”

button.

Select

“Traffic”

.

Select the desired item.

DISPLAYING TRAFFIC

INFORMATION

A list of current traffic information can be displayed along with information on the incident’s distance and position relative to the vehicle.

1

Display the “Traffic Information” screen. (

P.241)

2

Select

“Traffic Event List”

.

3

Select the desired traffic information.

“On Current Road”

: Select to display traffic information for the current road.

“On Current Route”

: Select to display traffic information for the set route.

When set to on, the indicator will illuminate.

4

Check that the traffic information is displayed.

8

No.

Function

Select to display a list of current traffic information.

Select to display a map with predictive traffic data.

Select to display traffic along the saved routes.

Page

241

242

242

“Detail”

: Select to display detailed traffic information.

241

1. BASIC OPERATION

DISPLAYING PREDICTIVE

TRAFFIC INFORMATION

A map with predictive traffic data can be displayed.

2

3

1

Display the “Traffic Information” screen. (

P.241)

Select

“Predictive Traffic Map”

.

Scroll the map to the desired point and set the time of predictive traffic information.

MY TRAFFIC ROUTES

Traffic information along the saved routes can be displayed. To use this function, it is necessary to register a route. (

P.286)

1

Display the “Traffic Information” screen. (

P.241)

2

Select

“My Traffic Routes”

.

If map data has been updated, a confirmation screen will be displayed. Select

“OK”

or

“Do Not Tell Me Again”

.

3

Select the desired route.

The time of the predictive traffic information can be displayed in 15-minute steps up to +45 minutes.

“+”

: Moves the time forward 15 minutes.

“-”

: Moves the time back 15 minutes.

“Options”

: Select to add, edit or delete my traffic routes.(

P.286)

If routes have not been registered yet, a confirmation screen will be displayed.

Select

“Yes”

to register the route.

4

Select the desired traffic information.

242

1. BASIC OPERATION

DISPLAYING TRAFFIC

INFORMATION ON THE MAP

1

2

Select

“Options”

on the map screen.

Select

“Map Information”

.

3

Select

“Traffic Information”

.

When set to on, the indicator will illuminate.

4

Check that the traffic information is displayed.

No.

Information/Function

The icons show traffic incident, road repair, traffic obstacles, etc. Select to display traffic information and start voice guidance for the traffic information.

The color of the arrow changes depending on the traffic information received.

The indicator is displayed as follows.

: Traffic information has been received.

: Traffic information has been received via HD.

No icon: Traffic information has not been received.

8

243

2. DESTINATION SEARCH

1. DESTINATION SEARCH SCREEN

The “Destination” screen enables to search for a destination. To display the “Destination” screen, select

“Dest.”

on the map screen.

244

No.

Function

Select to search for a destination by address.

Select to search for a destination by point of interest.

Select to search for a destination from previously set destinations.

Select to search for a destination from a registered entry in “Address

Book”.

Select to search for a destination by online database.

Select to search for a destination from emergency service points.

Select to search for a destination by intersection or freeway entrance/ exit.

Select to search for a destination by the last displayed map.

Select to search for a destination by coordinates.

Select to set a destination by home.

305

254

254

256

256

247

Page

248

249

253

253

No.

Function

Select to set a destination from preset destinations.

Select to delete set destinations.

2. DESTINATION SEARCH

Page

247

268

8

245

2. DESTINATION SEARCH

2. SEARCH OPERATION

1

Press the

“APPS”

button.

5

Select

“Go”

when the confirm destination screen is displayed.

2

3

4

Select

Select

“Navigation”

“Dest.”

.

.

Search for a destination.

There are different kinds of methods to search for a destination. (

P.244)

No.

Function

Select to adjust the position in smaller increments. (

P.236)

Select to register as a memory point.

Select to call the registered number.

Select to search for the route.

(

P.257)

If a destination has already been set,

“Go Directly”

and

“Add to

Route”

will be displayed.

“Go Directly”

: Select to delete the existing destination(s) and set a new one.

“Add to Route”

: Select to add a destination.

246

2. DESTINATION SEARCH

SELECTING SEARCH AREA

The selected state (province) can be changed to set a destination from a different state (province) by using

“Address”

,

“Point of Interest”

or

“Intersection & Freeway”

.

1

Display the “Destination” screen.

(

P.246)

2

Select

“Address”

,

“Point of Interest”

or

“Intersection & Freeway”

.

3

Select

“Select State/Province”

or

“Change State/Province”

.

If a state (province) has not been selected yet,

“Select State/Province”

is displayed.

4

Select the desired state (province).

SETTING HOME AS

DESTINATION

To use this function, it is necessary to register a home address. (

P.272)

1

Display the “Destination” screen.

(

P.246)

2

Select

“Go Home”

.

The navigation system performs a search for the route and the entire route map is displayed. (

P.257)

SETTING PRESET

DESTINATIONS AS

DESTINATION

1

To use this function, it is necessary to register preset destinations to the preset screen buttons (1-5). (

P.273)

2

Display the “Destination” screen.

(

P.246)

Select any of the preset destination buttons (

1-5

).

8

To change countries, select the

“United

States”

,

“Canada”

or

“Mexico”

tab.

For map database information and updates:

P.292

The navigation system performs a search for the route and the entire route map is displayed. (

P.257)

247

2. DESTINATION SEARCH

SEARCHING BY ADDRESS

There are 2 methods to search for a destination by address.

1

2

3

Display the “Destination” screen.

(

P.246)

Select

“Address”

.

Select the desired search method.

SEARCHING BY CITY

1

Select

“City”

.

2

Enter a city name and select

“OK”

.

“Last 5 Cities”

: Select the city name from the list of the last 5 cities.

3

4

Select the desired city name.

Enter a street name and select

“OK”

.

5

Select the desired street name.

6

Enter a house number and select

“OK”

.

If the same address exists, the address list screen will be displayed. Select the desired address.

No.

Function

Select to search by city.

Select to search by street address.

Page

248

249

248

2. DESTINATION SEARCH

SEARCHING BY STREET

ADDRESS

1

Select

“Street Address”

.

2

Enter a house number and select

“OK”

.

3

4

Enter a street name and select

“OK”

.

Select the desired street name.

5

Enter a city name and select

“OK”

.

6

Select the desired city name.

If the same address exists, the address list screen will be displayed. Select the desired address.

INFORMATION

A street name can be searched using only the body part of its name.

For example: S WESTERN AVE

• A search can be performed by entering

“S WESTERN AVE”, “WESTERN AVE” or “WESTERN”.

SEARCHING BY POINT OF

INTEREST

There are 3 methods to search for a destination by Points of Interest.

1

2

3

Display the “Destination” screen.

(

P.246)

Select

“Point of Interest”

.

Select the desired search method.

No.

Function

Select to search by name.

Select to search by category.

Select to search by phone number.

Page

250

251

252

8

249

2. DESTINATION SEARCH

SEARCHING BY NAME

1

2

3

Select

“Name”

.

Enter a POI name and select

“OK”

.

Select the desired POI.

No.

Function

Select to search for POI in the desired city.

Select to search for POI from the category list.

Page

250

250

When entering the name of a specific POI, and there are 2 or more sites with the same name, the list screen will be displayed. Select the desired POI.

INFORMATION

To search for a facility name using multiple search words, put a space between each word.

3

4

SELECTING A CITY TO SEARCH

1

Select

“City”

.

2

Enter a city name and select

“OK”

.

“Any City”

: Select to cancel the city setting.

Select the desired city name.

Select the desired POI.

1

2

SELECTING FROM THE CATEGO-

RIES

Select

“Category”

.

Select the desired category.

If there is more than 1 detailed item of the selected category, the detailed list will be displayed.

“List All Categories”

: Select to display all

POI categories.

3

Select the desired POI.

250

2. DESTINATION SEARCH

SEARCHING BY CATEGORY

1

2

Select

“Category”

.

Select the desired search point.

3

Select the desired POI category.

No.

Function

Select to set the search point from near the current position.

Select to search for POIs along the set route.

Select to set the search point from near a city center. (

P.252)

Select to set the search point from near a destination.

If there is more than 1 detailed item of the selected category, the detailed list will be displayed.

“List All Categories”

: Select to display all

POI categories.

“Favorite POI Categories”

: Select to use the 6 POIs that have been previously set.(

P.281)

4

Select the desired POI.

INFORMATION

The names of POIs located within approximately 200 miles (320 km) from the selected search point can be displayed.

8

251

2. DESTINATION SEARCH

When “Near a City Center in (area name)” is selected

3

4

1

Select

“Near a City Center in (area name)”

.

2

Enter a city name and select

“OK”

.

“Last 5 Cities”

: Select the city name from the list of the last 5 cities.

Select the desired city name.

Select

“OK”

when the city center map screen is displayed.

5

Follow the steps from 3 onward in

“SEARCHING BY CATEGORY”.

(

P.251)

SEARCHING BY PHONE

NUMBER

1

Select

“Phone #”

.

2

Enter a phone number and select

“OK”

.

If there is more than 1 site with the same number, the list screen will be displayed.

INFORMATION

If there is no match for the entered phone number, a list of identical numbers with different area codes will be displayed.

INFORMATION

If the navigation system has never been used, selecting the city name from

“Last

5 Cities”

will not be available.

252

2. DESTINATION SEARCH

SEARCHING FROM

PREVIOUS DESTINATIONS

1

2

3

Display the “Destination” screen.

(

P.246)

Select

“Previous Destinations”

.

Select the desired destination.

SEARCHING BY ADDRESS

BOOK

2

3

1

To use this function, it is necessary to register an address book entry.

(

P.275)

Display the “Destination” screen.

(

P.246)

Select

“Address Book”

.

Select the desired address book entry.

“Previous Start Point”

: Select to display the start point map of the previous guided route.

“Delete”

: Select to delete the previous destination. (

P.279)

INFORMATION

The previous start point and up to 100 previously set destinations are displayed on the screen.

“Options”

: Select to register or edit address book entries. (

P.275)

8

253

2. DESTINATION SEARCH

SEARCHING BY

EMERGENCY

1

Display the “Destination” screen.

(

P.246)

Select

“Emergency”

.

2

3

Select the desired emergency category.

SEARCHING BY

INTERSECTION AND

FREEWAY

There are 2 methods to search for a destination by Intersection & Freeway.

1

2

3

Display the “Destination” screen.

(

P.246)

Select

“Intersection & Freeway”

.

Select the desired method.

4

Select the desired destination.

INFORMATION

The navigation system does not guide in areas where route guidance is unavailable. (

P.291)

No.

Function

Select to search by intersection.

Select to search by freeway entrance/exit.

Page

255

255

254

2. DESTINATION SEARCH

SEARCHING BY

INTERSECTION

1

Select

“Intersection”

.

2

Enter the name of the first intersecting street which is located near the destination and select

“OK”

.

3

Select the desired street name.

SEARCHING BY FREEWAY

ENTRANCE/EXIT

1

Select

“Freeway Entrance/Exit”

.

2

Enter a freeway name and select

“OK”

.

3

4

Select the desired freeway.

Select

“Entrance”

or

“Exit”

.

4

Enter the name of the second intersecting street and select

“OK”

.

5

Select the desired street name.

If the 2 streets cross at more than 1 intersection in a city, the list of intersections will be displayed.

5

Enter a freeway entrance or exit name and select

“OK”

.

6

Select the desired entrance or exit name.

8

INFORMATION

Be sure to use the complete name of the freeway or highway, including the hyphen, when entering the destination.

Freeways and interstates use an “I” (I-

405). US highways use the state designation before the number (CA-118).

255

2. DESTINATION SEARCH

SEARCHING BY MAP

By selecting

“Map”

the last displayed location is displayed again on the map screen. You can search for a destination from this map.

1

Display the “Destination” screen.

(

P.246)

Select

“Map”

.

2

3

Scroll the map to the desired point and select

“Go to ”

.

SEARCHING BY

COORDINATES

1

Display the “Destination” screen.

(

P.246)

Select

“Coordinates”

.

2

3

Enter the latitude and longitude and select

“OK”

.

“Adjust Location”

: Select to adjust the position in smaller increments. (

P.236)

If a destination has already been set,

“Go to ”

and

“Add to Route”

will be displayed.

“Go to ”

: Select to delete the existing destination(s) and set a new one.

“Add to Route”

: Select to add a destination.

The navigation system performs a search for the route and the entire route map is displayed. (

P.257)

256

2. DESTINATION SEARCH

3. STARTING ROUTE GUIDANCE

When the destination is set, the entire route map from the current position to the destination is displayed.

STARTING ROUTE

GUIDANCE

1

Select

“OK”

to start guidance.

No.

Information/Function

Select the desired route from 3 possible routes. (

P.258)

Select to change the route.

(

P.259)

Select to display a list of the turns required to reach the destination.

(

P.259)

Current position

Destination point

Type of route and its distance

Distance of the entire route

Select to start guidance.

If

“OK”

is selected and held until a beep sounds, demo mode will start.

Press the

“HOME”

or

“APPS”

button to end demo mode.

WARNING

Be sure to obey traffic regulations and keep road conditions in mind while driving. If a traffic sign on the road has been changed, the route guidance may not indicate such changed information.

INFORMATION

The route for returning may not be the same as that for going.

The route guidance to the destination may not be the shortest route or a route without traffic congestion.

Route guidance may not be available if there is no road data for the specified location.

When setting the destination on a map with a scale more than 0.5 mile (800 m), the map scale changes to 0.5 miles (800 m) automatically. If this occurs, set the destination again.

If a destination that is not located on a road is set, the vehicle will be guided to the point on a road nearest to the destination. The road nearest to the selected point is set as the destination.

8

257

2. DESTINATION SEARCH

3 ROUTES SELECTION

1

2

Select

“3 Routes”

.

Select the desired route.

1

2

DISPLAYING 3 ROUTES INFORMA-

TION

Select

“Info”

.

Check that the “3 Routes Information” screen is displayed.

No.

Function

Select to display the quickest route.

Select to display the route that is the shortest distance to the set destination.

Select to display the alternative route.

Select to display the information about the 3 routes. (

P.258)

No.

Information

Time necessary for the entire trip

Distance of the entire trip

Distance of the toll road

Distance of the freeway

Distance of the ferry trip

258

2. DESTINATION SEARCH

DISPLAYING TURN LIST

A list of turn information from the current position to the destination can be displayed.

1

2

Select

“Turn List”

.

Check that the turn list is displayed.

EDITING ROUTE

Destinations can be added, reordered or deleted, and conditions for the route to the destination can be changed.

1

2

Select

“Edit Route”

.

Select the desired item.

No.

Information

Current position

Distance to the next turn

Turn direction at the intersection

Select to display the map of the selected point.

INFORMATION

However, not all road names on the route may appear on the list. If a road changes its name without requiring a turn (such as on a street that runs through 2 or more cities), the name change will not appear on the list. The street names will be displayed in order from the starting point, along with the distance to the next turn.

No.

Function

Select to add destinations.

Select to delete destinations.

Select to reorder destinations.

Select to set route preferences.

Select to change route type.

Select to set detours.

Page

268

268

268

268

269

269

8

INFORMATION

Even if the “Freeways” indicator is dimmed, the route cannot avoid including a freeway in some cases. (

P.268)

If the calculated route includes a trip by ferry, the route guidance shows a sea route. After traveling by ferry, the current position may be incorrect. Upon reception of GPS signals, it is automatically corrected.

259

2. DESTINATION SEARCH

PAUSING GUIDANCE

1

2

Select

“Options”

on the map screen.

Select

“Pause Guidance”

.

RESUMING GUIDANCE

1

Select

“Resume Guidance”

.

260

3. ROUTE GUIDANCE

1. ROUTE GUIDANCE SCREEN

During the route guidance, various types of guidance screens can be displayed depending on conditions.

SCREEN FOR ROUTE

GUIDANCE

CHANGING ROUTE

INFORMATION BAR

When the vehicle is on the guidance route, the route information bar displays the current street name or the distance with the estimated travel/arrival time to the destination.

1

Select the route information bar ( ) or the route information button ( ) to change the display of the route information bar.

No.

Information/Function

Distance to the next turn and an arrow indicating the turning direction

Guidance route

Current position

Current street name or route information

INFORMATION

If the vehicle goes off the guidance route, the route is searched again.

For some areas, the roads have not been completely digitized in our database. For this reason, the route guidance may select a road that should not be traveled on.

When arriving at the set destination the destination name will be displayed on the upper part of the screen.

No.

Information/Function

Select to change the display between the estimated travel time and the estimated arrival time.

Select to change the display between the current street name and the distance with the estimated travel/arrival time.

8

INFORMATION

When the vehicle is on the guidance route, the distance measured along the route is displayed. Travel time and arrival time are calculated based on the average speed for the specified speed limit.

When the vehicle gets off the guidance route, the arrow facing the destination is displayed instead of the estimated travel/arrival time.

The route information bar fills from left to right as the vehicle progresses on the route.

261

3. ROUTE GUIDANCE

DISTANCE AND TIME TO

DESTINATION

When driving on the guidance route with more than 1 destination set, a list of the distance with estimated travel/ arrival time from the current position to each destination is displayed.

1

2

Select the route information bar.

Check that the list of the distance and time is displayed.

ROUTE OVERVIEW

The entire route from the current position to the destination can be displayed during the route guidance.

1

2

3

Select

“Options”

on the map screen.

Select

“Route Overview”

.

Check that the entire route map is displayed.

By selecting one of the number buttons, the desired route information is displayed.

For details about this screen:

P.257

262

3. ROUTE GUIDANCE

DURING FREEWAY DRIVING

During freeway driving, the freeway exit information screen will be displayed.

WHEN APPROACHING

FREEWAY EXIT OR JUNCTION

When the vehicle approaches an exit or junction, the freeway guidance screen will be displayed.

No./

Icon

Information/Function

Distance and time from the current position to the freeway exit/rest area.

Name of the freeway exit/rest area.

POIs that are close to a freeway exit.

Select to display the selected map of the exit vicinity.

Select to display the nearest freeway exit/rest area from the current position.

Select to scroll to farther freeway exit/rest area.

Select to scroll to closer freeway exit/rest area.

No.

Information/Function

Next exit or junction name

Distance from the current position to the exit or junction

Select to hide the freeway guidance screen. To return to the freeway guidance screen, select .

Remaining distance bar to the guidance point

8

263

3. ROUTE GUIDANCE

TOLLGATE GUIDANCE

When the vehicle approaches a tollgate, the tollgate view will be displayed.

WHEN APPROACHING

INTERSECTION

When the vehicle approaches an intersection, the intersection guidance screen will be displayed.

No.

Information/Function

Distance from the current position to the tollgate

Select to hide the tollgate guidance screen. To return to the tollgate guidance screen, select .

Remaining distance bar to the guidance point

No.

Information/Function

Next street name

Distance to the intersection

Select to hide the intersection guidance screen. To return to the intersection guidance screen, select

.

Remaining distance bar to the guidance point

264

3. ROUTE GUIDANCE

TURN LIST SCREEN

1

2

Select

“Turn List”

on the “Map Mode” screen. (

P.233)

Check that the turn list screen is displayed.

TURN-BY-TURN ARROW

SCREEN

On this screen, information about the next turn on the guidance route can be displayed.

1

2

Select

“Turn-by-Turn Arrow”

on the

“Map Mode” screen. (

P.233)

Check that the turn-by-turn arrow screen is displayed.

No.

Information/Function

Turn direction

Distance between turns

Next street or destination name

No.

Information/Function

Exit number or street name

Turn direction

Distance to the next turn

8

265

3. ROUTE GUIDANCE

2. TYPICAL VOICE GUIDANCE PROMPTS

As the vehicle approaches an intersection, or point, where maneuvering the vehicle is necessary, the system’s voice guidance will provide various messages.

WARNING

Be sure to obey the traffic regulations and keep the road condition in mind especially when you are driving on IPD roads. The route guidance may not have the updated information such as the direction of a one way street.

INFORMATION

If a voice guidance command cannot be heard, select on the map screen to hear it again.

To adjust the voice guidance volume:

P.59

Voice guidance may be made early or late.

If the system cannot determine the current position correctly, you may not hear voice guidance or may not see the magnified intersection on the screen.

266

3. ROUTE GUIDANCE

3. EDITING ROUTE

1

Press the

“APPS”

button.

5

Select the item to be set.

2

3

4

Select

“Navigation”

.

Select

“Options”

.

Select

“Edit Route”

.

No.

Function

Select to add destinations.

Select to delete destinations.

Select to reorder destinations.

Select to set route preferences.

Select to change route type.

Select to set detours.

Page

268

268

268

268

269

269

6

Check that the entire route map is displayed. (

P.257)

8

267

3. ROUTE GUIDANCE

ADDING DESTINATIONS

1

2

3

Display the “Edit Route” screen.

(

P.267)

Select

“Add”

.

4

Search for an additional destination in the same way as a destination search.

(

P.244

)

Select

“Add Destination Here”

to insert the new destination into the route.

DELETING DESTINATIONS

1

Display the “Edit Route” screen.

(

P.267)

2

Select

“Delete”

.

3

Select

“Yes”

when the confirmation screen appears.

When more than 1 destination has been set, a list will be displayed on the screen.

Select the item(s) to be deleted.

“Delete All”

: Select to delete all destinations on the list.

If more than 1 destination has been set, the system will recalculate the route(s) to the set destination(s) as necessary.

SETTING ROUTE

PREFERENCES

REORDERING

DESTINATIONS

When more than 1 destination has been set, the arrival order of the destinations can be changed.

1

Display the “Edit Route” screen.

(

P.267)

Select

“Reorder”

.

2

3

Select the desired destination and select

“Move Up”

or

“Move Down”

to change the arrival order. Then select

“OK”

.

The conditions to determine the route can be selected from various choices such as freeways, toll roads, ferries, etc.

2

3

1

Display the “Edit Route” screen.

(

P.267)

Select

“Preferences”

.

Select the desired route preferences and select

“OK”

.

When set to on, the indicator will illuminate.

268

3. ROUTE GUIDANCE

SELECTING ROUTE TYPE

1

2

3

Display the “Edit Route” screen.

(

P.267)

Select

“Route Type”

.

Select the desired route type.

DETOUR SETTING

During the route guidance, the route can be changed to detour around a section of the route where a delay is caused by road repairs, an accident, etc.

1

2

3

Display the “Edit Route” screen.

(

P.267)

Select

“Detour”

.

Select the desired detour distance.

During driving, the route guidance starts after selecting the desired route type.

4

The entire route from the starting point to the destination is displayed.

For details about this screen:

P.257

No.

Function

Select to detour within 1 mile of the current position.

Select to detour within 3 miles of the current position.

Select to detour within 5 miles of the current position.

Select to detour on the entire route.

Select to make the system search for the route based on traffic congestion information received from traffic information. (

P.241)

8

269

3. ROUTE GUIDANCE

INFORMATION

This picture shows an example of how the system would guide around a delay caused by a traffic jam.

This position indicates the location of a traffic jam caused by road repairs, an accident, etc.

This route indicates the detour suggested by the system.

When the vehicle is on a freeway, the detour distance selections are 5, 15 and

25 miles (or 5, 15 and 25 km if units are in km).

The system may not be able to calculate a detour route depending on the selected distance and surrounding road conditions.

270

4. MEMORY POINTS

1. MEMORY POINTS SETTINGS

2

3

Home, preset destinations, address book entries, areas to avoid can be set as memory points. The registered points can be used as the destinations.

(

P.244)

Registered areas to avoid, will be avoided when the system searches for a route.

1

Press the

“APPS”

button.

4

Select the desired item to be set.

Select

“Setup”

.

Select

“Navigation”

.

No.

Function

Select to set home.

Select to set preset destinations.

Select to set the address book.

Select to set areas to avoid.

Select to delete previous destinations.

Select to set detailed navigation settings.

Page

272

273

275

277

279

280

8

271

4. MEMORY POINTS

SETTING UP HOME

2

3

1

If home has been registered, that information can be recalled by selecting

“Go Home”

on the “Destination” screen. (

P.247)

Display the “Navigation Settings” screen. (

P.271)

Select

“Home”

.

Select the desired item to be set.

EDITING HOME

1

2

Select

“Edit”

.

Select the desired item to be edited.

No.

Function

Select to register home.

Select to edit home.

Select to delete home.

Page

272

272

272

No.

Function

Select to edit the home name.

Select to set display of the home name on/off.

Select to edit location information.

Select to edit the phone number.

Select to change the icon to be displayed on the map screen.

Page

277

277

277

276

3

Select

“OK”

.

REGISTERING HOME

1

2

Select

“Set Home”

.

3

Select the desired item to search for the location. (

P.244)

Select

“OK”

when the editing home screen appears.

DELETING HOME

1

2

Select

“Delete”

.

Select

“Yes”

when the confirmation screen appears.

272

4. MEMORY POINTS

SETTING UP PRESET

DESTINATIONS

2

3

1

If a preset destination has been registered, that information can be recalled by using preset destinations on the

“Destination” screen. (

P.247)

Display the “Navigation Settings” screen. (

P.271)

Select

“Preset Destinations”

.

Select the desired item.

REGISTERING PRESET

DESTINATIONS

1

Select

“Set”

.

2

3

Select the desired item to search for the location. (

P.244)

Select a position for this preset destination.

No.

Function

Select to register a preset destination.

Select to edit a preset destination.

Select to delete a preset destination.

Page

273

274

274

4

Select

“OK”

when the editing preset destination screen appears. (

P.274)

INFORMATION

Up to 5 preset destinations can be registered.

8

273

4. MEMORY POINTS

EDITING PRESET

DESTINATIONS

1

2

3

Select

“Edit”

.

Select the desired preset destination.

Select the item to be edited.

DELETING PRESET

DESTINATIONS

1

2

Select

“Delete”

.

Select the preset destination to be deleted and select

“Delete”

.

No.

Function

Select to edit the preset destination name.

Select to set display of the preset destination name on/off.

Select to edit location information.

Select to edit the phone number.

Select to change the icon to be displayed on the map screen.

Page

277

277

277

276

4

Select

“OK”

.

3

Select

“Yes”

when the confirmation screen appears.

274

4. MEMORY POINTS

SETTING UP ADDRESS

BOOK

Points on the map can be registered.

2

3

1

Display the “Navigation Settings” screen. (

P.271)

Select

“Address Book”

.

Select the desired item.

EDITING ADDRESS BOOK

ENTRIES

The icon, name, location and/or phone number of a registered address book entry can be edited.

1

2

3

Select

“Edit”

.

Select the desired address book entry.

Select the item to be edited.

No.

Function

Select to register address book entries.

Select to edit address book entries.

Select to delete address book entries.

Page

275

275

277

REGISTERING ADDRESS

BOOK ENTRIES

1

2

Select

“New”

.

3

Select the desired item to search for the location. (

P.244)

Select

“OK”

when the editing address book entry screen appears. (

P.275)

INFORMATION

Up to 100 address book entries can be registered.

No.

Function

Select to edit the address book entry name.

Select to set display of the address book entry name on/off.

Select to edit location information.

Select to edit the phone number.

Select to change the icon to be displayed on the map screen.

Page

277

277

277

276

4

Select

“OK”

.

8

275

4. MEMORY POINTS

CHANGING THE ICON

1

2

Select

“Edit”

next to the “Icon”.

Select the desired icon.

Change pages by selecting the

“Page 1”

,

“Page 2”

or

“With Sound”

tab.

“With Sound”

: Select the memory points with a sound

When the

“With Sound”

tab is selected

A sound for some address book entries can be set. When the vehicle approaches the location of the address book entry, the selected sound will be heard.

1

2

Select the

“With Sound”

tab.

Select the desired sound icon.

: Select to play the sound.

When

“Bell (with Direction)”

is selected, select an arrow to adjust the direction and select

“OK”

.

INFORMATION

The bell sounds only when the vehicle approaches this point in the direction that has been set.

276

4. MEMORY POINTS

CHANGING THE NAME

1

Select

“Edit”

next to “Name”.

2

Enter a name and select

“OK”

.

CHANGING THE LOCATION

1

Select

“Edit”

next to “Location”.

2

Scroll the map to the desired point

(

P.236) and select

“OK”

.

CHANGING PHONE NUMBER

1

Select

“Edit”

next to “Phone #”.

2

Enter the phone number and select

“OK”

.

SETTING UP AREAS TO

AVOID

Areas to be avoided because of traffic jams, construction work or other reasons can be registered as “Areas to

Avoid”.

1

2

3

Display the “Navigation Settings” screen. (

P.271)

Select

“Areas to Avoid”

.

Select the desired item.

DELETING ADDRESS BOOK

ENTRIES

1

2

Select

“Delete”

.

Select the item to be deleted and select

“Delete”

.

No.

Function

Select to register areas to avoid.

Select to edit areas to avoid.

Select to delete areas to avoid.

Page

278

278

279

8

3

Select

“Yes”

when the confirmation screen appears.

277

4. MEMORY POINTS

REGISTERING AREAS TO

AVOID

1

2

Select

“New”

.

Select the desired item to search for the location. (

P.244)

3

Select either or to change the size of the area to be avoided and select

“OK”

.

EDITING AREAS TO AVOID

The name, location and/or area size of a registered area can be edited.

1

2

3

Select

“Edit”

.

Select the area and select

“OK”

.

Select the item to be edited.

4

Select

“OK”

when the editing area to avoid screen appears.

INFORMATION

If a destination is entered in the area to avoid or the route calculation cannot be made without running through the area to avoid, a route passing through the area to be avoided may be shown.

Up to 10 locations can be registered as points/areas to avoid.

No.

Function

Select to edit the name of the area to avoid.

Select to set display of the area to avoid name on/off.

Select to edit area location.

Page

279

279

279

Select to edit area size.

Select to set the area to avoid function on/off.

4

Select

“OK”

.

278

4. MEMORY POINTS

CHANGING THE NAME

1

Select

“Edit”

next to “Name”.

2

Enter a name and select

“OK”

.

CHANGING THE LOCATION

1

Select

“Edit”

next to “Location”.

2

Scroll the map to the desired point

(

P.236) and select

“OK”

.

CHANGING THE AREA SIZE

1

Select

“Edit”

next to “Size”.

2

Select either or to change the size of the area to be avoided and select

“OK”

.

DELETING AREAS TO AVOID

1

2

Select

“Delete”

.

Select the area to be deleted and select

“Delete”

.

3

Select

“Yes”

when the confirmation screen appears.

DELETING PREVIOUS

DESTINATIONS

Previous destinations can be deleted.

1

Display the “Navigation Settings” screen. (

P.271)

Select

“Delete Previous Dest.”

.

2

3

Select the previous destination to be deleted and select

“Delete”

.

8

4

Select

“Yes”

when the confirmation screen appears.

279

5. SETUP

1. DETAILED NAVIGATION SETTINGS

Settings are available for pop-up information, favorite POI categories, etc.

1

Press the

“APPS”

button.

SCREENS FOR NAVIGATION

SETTINGS

4

5

2

3

Select

“Setup”

.

Select

“Navigation”

.

Select

“Detailed Navi. Settings”

.

Select the items to be set.

280

5. SETUP

No.

Function

Select to set the voice guidance for the next street name on/off.

Select to set IPD road guidance on/off.

Select to set favorite POI categories that are used for

POI selection to display on the map screen.

Select to adjust the current position mark manually or to adjust miscalculation of the distance caused by tire replacement.

Select to set display of popup information on/off.

Select to reset all setup items.

Page

281

282

FAVORITE POI CATEGORIES

(SELECT POI ICONS)

Up to 6 POI icons, which are used for selecting POIs on the map screen, can be selected as favorites.

1

2

3

Display the “Detailed Navi. Settings” screen.

(

P.280)

Select

“Favorite POI Categories”

.

Select the category to be changed.

“Default”

: Select to set the default categories.

4

Select the desired POI category.

“List All Categories”

: Select to display all

POI categories.

5

Select the desired POI icon.

8

281

5. SETUP

CURRENT POSITION/TIRE

CHANGE CALIBRATION

The current position mark can be adjusted manually. Miscalculation of the distance caused by tire replacement can also be adjusted.

1

2

3

Display the “Detailed Navi. Settings” screen. (

P.280)

Select

“Calibration”

.

Select the desired item.

POSITION/DIRECTION CALIBRA-

TION

When driving, the current position mark will be automatically corrected by

GPS signals. If GPS reception is poor due to location, the current position mark can be adjusted manually.

1

2

3

Select

“Position/Direction”

.

Scroll the map to the desired point

(

P.236) and select

“OK”

.

Select an arrow to adjust the direction of the current position mark and select

“OK”

.

For additional information on the accuracy of a current position:

P.290

282

TIRE CHANGE CALIBRATION

The tire change calibration function will be used when replacing the tires. This function will adjust miscalculation caused by the circumference difference between the old and new tires.

1

Select

“Tire Change”

.

The message appears and the quick distance calibration starts automatically.

INFORMATION

If this procedure is not performed when the tires are replaced, the current position mark may be incorrectly displayed.

5. SETUP

8

283

5. SETUP

2. TRAFFIC SETTINGS

Traffic information such as traffic congestion or traffic incident warnings can be made available.

1

Press the

“APPS”

button.

SCREEN FOR TRAFFIC

SETTINGS

2

3

4

Select

“Setup”

.

Select

“Traffic”

.

Select the items to be set.

No.

Function

Select to set specific routes (such as frequently used routes) on which you wish to receive traffic information. (

P.286)

Select to set the avoid traffic function auto/manual. (

P.285)

Select to set the usage of traffic information for the estimated arrival time on/off.

Select to set the display of an arrow of free flowing traffic on/off.

Select to set to on/off whether to consider the predictive traffic information (

P.242) with estimated ar-

rival time and detoured route search.

Select to set of traffic incident voice warning on/off.

Select to reset all setup items.

284

5. SETUP

AUTO AVOID TRAFFIC

1

2

3

Display the “Traffic Settings” screen.

(

P.284)

Select

“Avoid Traffic”

.

Select the desired item.

CHANGING THE ROUTE

MANUALLY

When the navigation system calculates a new route, the following screen will be displayed.

1

Select the desired item.

No.

Function

Select to automatically change routes when congestion information of the guidance route has been received.

Select to select manually whether or not to change routes when congestion information of the guidance route has been received. In this mode, a screen will appear to ask if you wish to reroute.

Select to not reroute when congestion information for the guidance route has been received.

4

Select

“OK”

.

No.

Function

Select to start route guidance using the new route.

Select to confirm the new route and current route on the map.

Select to continue the current route guidance.

8

285

5. SETUP

MY TRAFFIC ROUTES

Specific routes (such as frequently used routes) on which you wish to receive traffic information can be registered as “My Traffic Routes”. A route is set by defining a start point and end point, and can be adjusted by setting up to 2 preferred roads.

2

3

1

Display the “Traffic Settings” screen.

(

P.284)

Select

“My Traffic Routes”

.

Select the desired item.

1

2

REGISTERING PERSONAL

ROUTES

Select

“New”

.

Select

“Edit”

next to “Name”.

3

4

5

Enter the name and select

“OK”

.

Select

“Edit”

next to “Start”.

Select the desired item to search for the location. (

P.244)

No.

Function

Select to register personal routes

Select to edit personal routes

Select to delete personal routes

Page

286

287

287

6

Select

“Edit”

next to “End”.

7

Select the desired item to search for the location. (

P.244)

8

Select

“OK”

when the editing traffic route screen appears.

The routes can be adjusted by setting preferred roads. (

P.288)

INFORMATION

Up to 5 routes can be registered.

286

5. SETUP

EDITING PERSONAL ROUTES

1

2

Select

“Edit”

.

Select the desired traffic route.

DELETING PERSONAL

ROUTES

1

Select

“Delete”

.

2

Select the traffic route to be deleted and select

“Delete”

.

3

Select

“Edit”

next to the item to be edited.

3

Select

“Yes”

when the confirmation screen appears.

8

No.

Function

Select to edit the name of personal routes

Select to edit start location

Page

286

Select to edit end location

Select to see and modify the entire route.

4

Select

“OK”

.

The entire route map will be displayed.

287

5. SETUP

SETTING PREFERRED ROADS

“My Traffic Routes” can be adjusted by setting up to 2 preferred roads.

1

Select

“Set Preferred Roads”

.

ADDING PREFERRED ROADS

1

Select

“Add”

.

If two preferred roads are already set, select

“Yes”

and delete a preferred road before add a new one.

2

Scroll the map to the desired point and select

“OK”

.

2

Select the desired item.

3

Select

“OK”

to use this road.

“Next”

: Select to change road.

4

Select

“Add Here”

for the desired location.

No.

Function

Select to add preferred roads.

Select to modify preferred roads.

Select to delete preferred roads.

Page

288

289

289

If a preferred road is already set, a second preferred road can be added anywhere between the start point, the end point and the existing preferred road.

288

5. SETUP

MODIFYING PREFERRED ROADS

1

Select

“Modify”

.

2

Select the preferred road to be modified.

DELETING PREFERRED ROADS

1

Select

“Delete”

.

2

Select the preferred road to be deleted.

3

Scroll the map to the desired point and select

“OK”

.

“Delete All”

: Select to delete all preferred roads on the list.

3

Select

“Yes”

when the confirmation screen appears.

8

4

Select

“OK”

to use this road.

“Next”

: Select to change road.

289

6. TIPS FOR THE NAVIGATION SYSTEM

1. GPS (GLOBAL POSITIONING SYSTEM)

LIMITATIONS OF THE

NAVIGATION SYSTEM

This navigation system calculates the current position using satellite signals, various vehicle signals, map data, etc.

However, an accurate position may not be shown depending on satellite conditions, road configuration, vehicle condition or other circumstances.

The Global Positioning System (GPS) developed and operated by the U.S. Department of Defense provides an accurate current position, normally using 4 or more satellites, and in some case 3 satellites.

The GPS system has a certain level of inaccuracy. While the navigation system compensates for this most of the time, occasional positioning errors of up to 300 ft.

(100 m) can and should be expected. Generally, position errors will be corrected within a few seconds.

When the vehicle is receiving signals from satellites, the “GPS” mark appears at the top left of the screen.

The GPS signal may be physically obstructed, leading to inaccurate vehicle position on the map screen. Tunnels, tall buildings, trucks, or even the placement of objects on the control panel may obstruct the GPS signals.

The GPS satellites may not send signals due to repairs or improvements being made to them.

Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases.

NOTICE

The installation of window tinting may obstruct the GPS signals. Most window tinting contains some metallic content that will interfere with GPS signal reception of the antenna in the instrument panel. We advise against the use of window tinting on vehicles equipped with navigation systems.

290

6. TIPS FOR THE NAVIGATION SYSTEM

Accurate current position may not be shown in the following cases:

• When driving on a small angled Yshaped road.

• When driving on a winding road.

• When driving on a slippery road such as in sand, gravel, snow, etc.

• When driving on a long straight road.

• When freeway and surface streets run in parallel.

• After moving by ferry or vehicle carrier.

• When a long route is searched during high speed driving.

• When driving without setting the current position calibration correctly.

• After repeating a change of direction by going forward and backward, or turning on a turntable in a parking lot.

• When leaving a covered parking lot or parking garage.

• When a roof carrier is installed.

• When driving with tire chains installed.

• When the tires are worn.

• After replacing a tire or tires.

• When using tires that are smaller or larger than the factory specifications.

• When the tire pressure in any of the 4 tires is not correct.

If the vehicle cannot receive GPS signals, the current position can be adjusted manually. For information on setting the current position calibration:

P.282

Inappropriate route guidance may occur in the following cases:

• When turning at an intersection off the designated route guidance.

• If you set more than 1 destination but skip any of them, auto reroute will display a route returning to the destination on the previous route.

• When turning at an intersection for which there is no route guidance.

• When passing through an intersection for which there is no route guidance.

• During auto reroute, the route guidance may not be available for the next turn to the right or left.

• During high speed driving, it may take a long time for auto reroute to operate. In auto reroute, a detour route may be shown.

• After auto reroute, the route may not be changed.

• If an unnecessary U-turn is shown or announced.

• If a location has multiple names and the system announces 1 or more of them.

• When a route cannot be searched.

• If the route to your destination includes gravel, unpaved roads or alleys, the route guidance may not be shown.

• Your destination point might be shown on the opposite side of the street.

• When a portion of the route has regulations prohibiting the entry of the vehicle that vary by time or season or other reasons.

• The road and map data stored in the navigation system may not be complete or may not be the latest version.

8

After replacing a tire:

P.283

INFORMATION

This navigation system uses tire turning data and is designed to work with factory-specified tires for the vehicle.

Installing tires that are larger or smaller than the originally equipped diameter may cause inaccurate display of the current position. The tire pressure also affects the diameter of the tires, so make sure that the tire pressure of all 4 tires is correct.

291

6. TIPS FOR THE NAVIGATION SYSTEM

2. MAP DATABASE VERSION AND COVERED AREA

MAP INFORMATION

Coverage areas and legal information can be displayed and map data can be updated.

1

Press the

“APPS”

button.

5

Check that the map data screen is displayed.

2

3

4

Select

“Navigation”

.

Select

“Options”

.

Select

“Map Data”

.

No.

Function

Map version

Select to display map coverage areas.

Select to display legal information.

INFORMATION

Map data updates are available for a fee. Contact your Toyota dealer for further information.

292

ABOUT THE MAP DATA

Map data for the navigation system is contained in a SD card that is inserted in the SD card slot.

Do not eject the SD card, as doing so may deactivate the navigation system.

6. TIPS FOR THE NAVIGATION SYSTEM

NOTICE

Do not edit or delete the map data on the SD card, as doing so may deactivate the navigation system.

INFORMATION

● microSDHC Logo is a trademark of SD-

3C,LLC.

8

293

6. TIPS FOR THE NAVIGATION SYSTEM

294

9

Entune App Suite

*

2

1

Entune App Suite OVERVIEW

3

1. Entune App Suite SERVICE ...... 296

BEFORE USING THE FUNCTION ...... 298

PREPARATION BEFORE USING

Entune App Suite .............................. 299

4

5

2 Entune App Suite OPERATION

6

1. Entune App Suite ....................... 301

USING AN Entune App Suite............... 301

LINKING Entune App Suite AND

NAVIGATION FUNCTION................. 305

Entune App Suite

KEYWORD OPERATION.................. 306

7

8

3

SETUP

1. Entune App Suite SETTINGS .... 308

9

1

*: Entune Premium Audio only (Available in the 48 states, D.C. and Alaska)

295

1. Entune App Suite OVERVIEW

1. Entune App Suite SERVICE

Entune App Suite is a service that enables downloadable applications to be displayed on and operated from the multimedia screen. Before Entune App Suite can be used, a few actions need to be performed first. (

P.299)

USB*

1

296

1. Entune App Suite OVERVIEW

No.

Name

Content provider

Function

Provides content to the multimedia system via a cellular phone.

*

2

Application server

Cellular phone

Applications

Provides downloadable application to the multimedia system via a cellular phone.

Using the Entune App Suite application, communication is relayed between the multimedia system, the application server and the content provider.

For known compatible phones, refer to http://www.toyota.com/ entune/.

Downloaded Entune App Suite applications provide access to audio/visual content from a content provider when connected via a compatible phone with a data connection.

Multimedia system

Content received, via a cellular phone, from the content provider’s server are displayed on the screen. The multimedia system is equipped with an application player to run applications.

*

1

: iPhone only

*

2

: For known compatible phones, refer to http://www.toyota.com/entune/.

INFORMATION

The actual service availability is dependent on the network condition.

9

297

1. Entune App Suite OVERVIEW

BEFORE USING THE

FUNCTION

SUBSCRIPTION

User registration is required to start using the Entune App Suite service.

Entune App Suite does not require an activation fee or monthly recurring fees.

Services requiring a separate contract can also be used.*

*: For details, refer to http:// www.toyota.com/entune/ or call 1-800-

331-4331.

AVAILABILITY OF SERVICE

Entune App Suite is available in the contiguous United States, D.C. and Alaska.

INFORMATION

When using Entune App Suite, depending on the details of your cellular phone contract, data usage fees may apply.

Confirm data usage fees before using this service.

In this section, the required actions to activate applications, connect a cellular phone to the navigation system and registration steps for Entune App Suite are explained. For details regarding Entune

App Suite operations and each of the applications, refer to http://www.toyota.com/entune/.

The actual service availability is dependent on the cellular network condition.

INITIALIZING PERSONAL

DATA

The personal data used in applications can be removed from the multimedia system. (

P.58)

The following personal data can be deleted from the system and returned to their default settings:

• Downloaded applications

• Downloaded application content

INFORMATION

Once initialized, data will be erased from the system. Pay close attention when initializing the data.

298

1. Entune App Suite OVERVIEW

PREPARATION BEFORE

USING Entune App Suite

USER REGISTRATION

1

Perform user registration at http:// www.toyota.com/entune/.

SETUP REQUIRED TO USE

Entune App Suite

Perform the following actions.

1

User registration

2

3

Download the Entune App Suite application to your cellular phone.

Register the cellular phone to the multimedia system.

4

Download Entune App Suite applications to the multimedia system.

In order to use Entune App Suite, the following actions must first be performed:

User registration with a service contract

(

P.299)

Download the Entune App Suite application onto your cellular phone, and login to the application. (

P.299)

Register a Bluetooth

®

phone with the hands-free system. (

P.42)

Download Entune App Suite applications to the multimedia system. (

P.300)

DOWNLOADING AND

LOGGING INTO THE Entune

App Suite APPLICATION

1

Download the Entune App Suite application to your cellular phone.

2

Run the Entune App Suite application on your cellular phone.

3

Enter the information required into the

Entune App Suite application. Login to the application.

INFORMATION

Applications can only be used when the

Entune App Suite application has been downloaded to your cellular phone and the application is running.

Entune App Suite operational procedures can also be confirmed by visiting http://www.toyota.com/entune/.

In order to use applications, it is necessary to run the Entune App Suite application on your cellular phone.

For known phone compatibility information, refer to http://www.toyota.com/ entune/.

If an Entune App Suite application is used while iPod audio is being played back, system operation may become unstable.

9

299

1. Entune App Suite OVERVIEW

DOWNLOADING Entune App

Suite APPLICATION TO

MULTIMEDIA SYSTEM

1

The actions on P.299 need to be per-

formed before Entune App Suite applications can be downloaded.

2

Once your phone is running the Entune

App Suite application with a valid account logged in and is connected to the multimedia system, an on-screen popup will be displayed offering to begin downloading Entune App Suite applications to the multimedia system. After

download has started, see P.302 for

more information.

300

2. Entune App Suite OPERATION

1. Entune App Suite

USING AN Entune App Suite

Entune App Suite is a service that enables the usable contents of a cellular phone to be displayed on and operated from the multimedia screen. Before

Entune App Suite can be used, a few actions need to be performed first.

(

P.299)

For details about the function and service of each application, refer to http:// www.toyota.com/entune/.

1

Press the

“APPS”

button.

2

Select the desired Entune App Suite application.

No.

Function

Select to activate an application.

Select to update the application.

Select to reorder the applications.

Page

302

35

9

301

2. Entune App Suite OPERATION

UPDATING AN APPLICATION

When Entune App Suite is activated, an application may need to be updated. By updating, an application can be updated to the latest version. When updating the application, it is necessary to download the updated data and install it.

DOWNLOADING THE UPDATED

DATA

If an update is available,

“Update”

can be selected.

1

Select

“Update”

.

3

Check that downloading is completed.

No.

Function

Select to install the update later. The screen will return to the last displayed screen.

Select to display detailed information about the updated data.

Select to install the updated data.

Follow the steps “INSTALLING THE

UPDATED DATA” from “STEP 2”.

(

P.303)

2

Check that downloading is started.

INFORMATION

Application download time may vary based on the speed of the cellular network.

Application download can be resumed after ignition off and back on.

Future mandatory updates will display an on-screen pop-up when available.

Entune App Suite function cannot be operated while mandatory updates downloading.

“Download in Background”

: Select to operate other functions while downloading.

“Cancel”

: Select to cancel updating.

302

INSTALLING THE UPDATED DATA

After the downloading is complete,

“Update”

will be changed to

“Install”

.

1

2

Select

“Install”

.

Select

“Continue”

.

“Later”

: Select to postpone the installation of the updated data and go back to the previous screen.

3

Check that installing is started.

“Install in Background”

: Select to operate other function while installing.

4

Select

“OK”

after the installing is complete.

INFORMATION

Entune App Suite function cannot be operated while installing.

2. Entune App Suite OPERATION

9

303

2. Entune App Suite OPERATION

IF A MESSAGE APPEARS ON THE SCREEN

When problems occur starting up the application player, a message will appear on the screen. Referring to the table below to identify the problem, take the suggested corrective action. The following messages are only a few examples. If a message other than the following is displayed, follow the instructions displayed on the screen.

Message

“The Phone is not connected.

For more information, please visit toyota.com.”

Display conditions

The cellular phone cannot be connected.

Corrective action

Refer to http:// www.toyota.com/entune/ to confirm if the phone is compatible or not.

“To use the services, an active application needs to be running on your phone. For more information, please visit toyota.com.”

The Entune App Suite application cannot be connected to Bluetooth SPP.

Refer to http:// www.toyota.com/entune/ to confirm if the phone is

Bluetooth* SPP compatible or not, and then activate the Entune App Suite application on your phone.

*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

INFORMATION

The actual messages displayed on screen may differ from the messages in this manual.

304

2. Entune App Suite OPERATION

LINKING Entune App Suite

AND NAVIGATION FUNCTION

The navigation system can set a destination and make a hands-free call via

Entune App Suite. For details about the function and service of each application, refer to http://www.toyota.com/ entune/.

1

Press the

“APPS”

button.

SETTING A DESTINATION

USING Entune App Suite

Locations that were searched using

Entune App Suite can be set as a destination.

1

2

Display the “Web Search” screen.

(

P.305)

Select the desired application button to search.

3

4

5

Enter a search term, and select

“GO”

.

Select

“Map”

.

Select

“Go to ”

.

4

5

2

3

Select

“Navigation”

.

Select

“Dest”

.

Select

“Web Search”

.

Check that the “Web Search” screen is displayed.

6

Select

“OK”

to start guidance.

9

For the operation of the route guidance screen and the function of each screen button:

P.257

INFORMATION

Actual sequence may vary based on the application.

305

2. Entune App Suite OPERATION

MAKING A PHONE CALL

USING Entune App Suite

Phone calls can be made to locations which were searched using Entune

App Suite.

1

Display the “Web Search” screen.

(

P.305)

2

Select the desired application button to search.

3

4

Enter a search term, and select

“GO”

.

Select

“Call”

.

5

Select

“Yes”

.

“Cancel”

: Select to cancel making a phone call.

6

Check that the

“Call”

screen is displayed.

Entune App Suite KEYWORD

OPERATION

Information can be entered to an

Entune App Suite application by the software keyboard or voice recognition function. For details about the function and service of each application, refer to http://www.toyota.com/entune/.

The keyboard layout can be changed.

(

P.54)

USING THE SOFTWARE

KEYBOARD

1

2

Display the “Apps” screen. (

P.301)

Select the desired Entune App Suite application.

For phone operation and the function of each screen button:

P.199

3

Select the character input space.

INFORMATION

Actual sequence may vary based on the application.

306

2. Entune App Suite OPERATION

4

Enter a search term, and then select

“OK”

.

ENTERING A KEYWORD USING

THE VOICE RECOGNITION

FUNCTION

1

2

Display the “Apps” screen. (

P.301)

Select the desired Entune App Suite application.

5

Entering characters will be reflected on the character input space.

For details on operating the keyboard:

P.36

INFORMATION

Actual sequence may vary based on the application.

3

Press the talk switch on the steering wheel once the application screen is displayed. (

P.160)

4

System will prompt for user input.

End of user’s speech will be detected automatically, and the system will prompt for any additional information if needed.

5

Search results will be displayed on the screen.

9

307

3. SETUP

1. Entune App Suite SETTINGS

The phone data plan pop-up can be set when a paid application is downloaded.

1

Press the

“APPS”

button.

2

3

4

Select

“Setup”

.

Select

“Entune”

.

Select the items to be set.

No.

Function

Select to set the pop up reminder for cellular phone data usage.

Select to reset all setup items.

5

Select

“OK”

.

308

INDEX

7

8

5

6

9

3

4

1

2

309

ALPHABETICAL INDEX

A

AAC.......................................................... 94

AM............................................................ 77

APPS button ............................................ 12

“Apps” screen........................................... 14

AUDIO button........................................... 12

Audio settings ........................................ 112

AUX ........................................................ 109

C

Calling on the Bluetooth

®

phone............ 191

Casual speech recognization ................. 165

CD ............................................................ 94

Playing an audio CD............................. 96

Playing an MP3/WMA/AAC disc........... 96

Command list ......................................... 166

Contacts ................................................. 193

Controls overview..................................... 12

B

Bluetooth

®

................................................ 42

Profiles ................................................. 44

Registering a Bluetooth

®

audio

player ................................................ 43

Registering a Bluetooth

®

phone........... 42

Bluetooth

®

audio.................................... 105

Connecting a Bluetooth

®

device ........ 108

Listening to Bluetooth

®

audio............. 108

Bluetooth

®

phone................................... 186

Bluetooth

®

phone message function ..... 202

D

Data services settings ............................ 174

Destination search screen...................... 244

Driver settings .......................................... 62

310

E

Editing route........................................... 267

Adding destinations............................ 268

Deleting destinations.......................... 268

Detour setting..................................... 269

Reordering destinations ..................... 268

Selecting route type ........................... 269

Setting route preferences................... 268

Emergency............................................. 254

Entering letters and numbers/

list screen operation ............................. 36

Entune App Suite................................... 301

Entune App Suite keyword

operation......................................... 306

Linking Entune App Suite and

navigation function.......................... 305

Using Entune App Suite application.... 301

F

FM radio................................................... 77

G

General settings....................................... 54

GPS (Global Positioning System) .......... 290

H

Hands-free system.................................. 186

HOME button ........................................... 12

“Home” screen ......................................... 16

Home screen operation............................ 34

I

Incoming calls ......................................... 198

Initial screen............................................. 30

Internet radio............................................ 93

iPod........................................................ 101

311

ALPHABETICAL INDEX

K

Keyboard.................................................. 36

M

Maintenance ............................................ 63

Map database version and

covered area ...................................... 292

Map screen information ......................... 237

Displaying information about

the icon where the cursor is set ...... 239

Standard map icons ........................... 240

Map screen operation ............................ 231

Adjusting location in small

increments ...................................... 236

Current position display...................... 231

Map scale ........................................... 231

Orientation of the map........................ 232

Screen scroll operation....................... 235

Switching the map mode .................... 233

Memory points settings .......................... 271

Deleting previous destinations............ 279

Setting up address book..................... 275

Setting up areas to avoid.................... 277

Setting up home ................................. 272

Setting up preset destinations ............ 273

Message..................................................202

Microphone ............................................ 160

MP3.......................................................... 94

N

Navigation .............................................. 227

Navigation option screen.........................230

P

Phone/message settings........................ 207

“Contact/Call History Settings”

screen ............................................. 209

“Messaging Settings” screen .............. 217

“Phone Display Settings” screen ........ 218

“Sound Settings” screen ..................... 208

PWR·VOL button ..................................... 12

312

R

Radio ............................................ 77, 87, 93

Rear seat entertainment system............. 123

Rear view monitor system ..................... 176

Registering home..................................... 22

Registering preset destinations ............... 24

Registering/connecting Bluetooth

®

device................................................... 42

Certification .......................................... 46

Profiles ................................................. 44

Registering a Bluetooth

®

audio player

for the first time................................. 43

Registering a Bluetooth

®

phone

for the first time................................. 42

Route guidance screen.......................... 261

During freeway driving ....................... 263

Route overview .................................. 262

Screen for route guidance.................. 261

Turn list screen................................... 265

Turn-by-turn arrow screen.................. 265

When approaching intersection.......... 264

Route trace ............................................ 239

S

Satellite Radio.......................................... 87

Screen adjustment ................................... 39

SD card ................................................... 293

Search operation.................................... 246

Searching by address......................... 248

Searching by address book................ 253

Searching by coordinates................... 256

Searching by emergency.................... 254

Searching by intersection and

freeway ........................................... 254

Searching by map .............................. 256

Searching by point of interest............. 249

Searching from previous

destinations..................................... 253

Selecting search area......................... 247

Setting home as destination ............... 247

Setting preset destinations

as destination.................................. 247

313

ALPHABETICAL INDEX

Setting Bluetooth

®

details ........................ 47

“Bluetooth Setup” screen...................... 47

Connecting a Bluetooth

®

device .......... 49

Deleting a Bluetooth

®

device ............... 49

Editing the Bluetooth

®

device

information ........................................ 51

Registering a Bluetooth

®

device .......... 48

“System Settings” screen ..................... 52

Setting home as the destination............... 26

“Setup” screen ......................................... 20

Sound setting ............................................ 54

Starting route guidance.......................... 257

Steering switches................................... 111

T

Talking on the Bluetooth

®

phone ........... 199

Touch screen gestures............................. 32

Touch screen operation ........................... 33

Traffic information .................................. 241

Traffic map information ...........................173

Traffic settings........................................ 284

Auto avoid traffic................................. 285

My traffic routes .................................. 286

Screen for traffic settings.................... 284

Troubleshooting ..................................... 219

TUNE·SCROLL button............................. 12

Typical voice guidance prompts............. 266

314

U

USB/AUX port.......................................... 74

USB memory ........................................... 97

V

Vehicle settings......................................... 61

Voice command system......................... 160

Voice settings .......................................... 59

W

Weather information ............................... 172

WMA ........................................................ 94

X

XM Satellite Radio ................................... 87

315

Map database information and updates

316

317

318

319

320

321

322

Certain business data provided by Infogroup © 2014, All Rights Reserved.

323

Certification

Gracenote, the Gracenote logo and logotype, “Powered by Gracenote”, MusicID, Playlist

Plus and MediaVOCS are either registered trademarks or trademarks of Gracenote, Inc.

in the United States and/or other countries

324

325

For U.S. owners

326

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Table of contents