Using the steering wheel audio switches (if equipped). Toyota Highlander

3-2. Using the audio system

Using the steering wheel audio switches (if equipped)

Some audio features can be controlled using the switches on the steering wheel.

Volume

Radio: Selects radio stations

CD: Selects tracks, files

(MP3 and WMA) and discs

Turns the power on, selects audio source

Turning on the power

Press when the audio system is turned OFF.

The audio system can be turned off by holding the switch down until you hear a beep.

Changing the audio source

Press when the audio system is turned ON. The audio source changes as follows each time the switch is pressed.

CD player without changer:

FM1 → FM2 → CD → AUX → AM

CD player with changer:

FM1

→

FM2

→

CD changer

→

AUX

→

AM

→

SAT1

→

SAT2

→

SAT3

294

3-2. Using the audio system

Adjusting the volume

Press “+” on volume.

to increase the volume and “-” to decrease the

Press and hold the switch to continue increasing or decreasing the volume.

Selecting a radio station

STEP 1

STEP 2

Press to select the radio mode.

Press “ ∧ ” or “ ∨ ” on to select a preset station.

To scan for receivable stations, press and hold the switch until you hear a beep.

Selecting a track/file

STEP 1

STEP 2

Press to select the CD mode.

Press “ ∧ ” or “ ∨ ” on to select the desired track/file.

3

Selecting a folder (CD player without changer only)

STEP 1

STEP 2

Press to select the CD mode.

Press and hold “ ∧ ” or “ ∨ ” on until you hear a beep.

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

Press to select the CD mode.

Press and hold “ ∧ ” or “ ∨ ” on until you hear a beep.

CAUTION

■ To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

295