Installing the software
This section describes the procedures for installing the necessary software.
Installing the USB driver
☞ p.104
Installing the image processing software (ACDSee™ and ACD photostitcher)
☞ p.110
Installing the USB driver on Windows 98/98 SE only
If you are using Windows 2000, Windows Me or Windows XP, you do not need to install the USB driver. When you connect the camera to your computer with the USB cable, your computer will automatically detect the camera as [Removable Disk].
z
Turn your computer on.
x
Insert the CD-ROM (S-SW7) into the CD-ROM drive.
c
Make sure the camera is turned off and connect it to your computer with the USB cable.
Make sure that there is an SD Memory Card/MultiMedia Card in the camera.
104 v
Turn your camera on.
Your computer will automatically detect the camera as new hardware and the Wizard screen will appear.
b
Click [Next].
n
Select [Search for the best driver for your device] and click [Next].
m
Select [Specify a location] in the box on the left and click [Browse].
If another item has been selected, click the box to deselect it.
,
Click the CD-ROM drive icon and click [OK].
The figure on the right is displayed when the CD-ROM is set as the F drive.
105
106
.
Make sure that the specified drive is displayed and click [Next].
⁄0
Make sure that [PENSSTOR.INF] is displayed and click [Next].
Installation of the driver starts.
⁄1
Click [Finish].
When installation is finished, installation of the driver for the new hardware starts.
⁄2
Click [Next].
⁄3
Select [Search for the best driver for your device] and click [Next].
⁄4
Select [Specify a location] and click [Browse].
If another item has been selected, click the box to deselect it.
⁄5
Click the CD-ROM drive icon and click [OK].
The figure on the right is displayed when the CD-ROM is set as the F drive.
⁄6
Make sure that the specified drive is displayed and click [Next].
⁄7
Make sure that [PENSPDR.INF] is displayed and click [Next].
107
108
⁄8
Click [Finish].
When installation is finished, the Wizard window is exited.
⁄9
Double-click [My Computer] on the desktop.
A removable disk will be added.
Installing the image processing software
This section describes the procedures for installing ACDSee™ which lets you view recorded images on your computer and ACD photostitcher which lets you create panorama pictures.
Caution • The ACD photostitcher is only for the English version and the
Japanese version.
• If you are using Windows 2000 or Windows XP, login by the authority of the administrator before installing the software. See the operating manual for your computer for instructions on how to login.
Installing the ACDSee™
When installing the ACDSee™, recorded images can be viewed and edited on your computer.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW7) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW7)] icon.
3) Double click the [Setup.exe] icon.
c
Click your applicable language.
You can choose the language from the following: English, French,
German, Spanish, Italian and
Japanese.
109
v
Click the [ACDSee™].
The Setup screen will appear. Follow the on-screen guidance and enter the registration information. Reboot your
PC after installation finish.
110
Installing the ACD photostitcher
If you have installed ACDSee™ and ACD photostitcher in your computer, you can join the images you have taken in Panorama assist mode.
Make sure that the ACDSee™ has been installed.
z
Turn on your computer.
x
Insert the CD-ROM (S-SW7) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW7)] icon.
3) Double click the [Setup.exe] icon.
c
Click your applicable language.
You can choose the language from the following: English, French,
German, Spanish, Italian and Japanese.
v
Click the [ACD Photostitcher].
The Setup screen will appear. Follow the on-screen guidance and enter the registration information.
The screen will return to PENTAX
Software Installer. Click the [Exit] to finish.
