Appendices 75
Appendix D: Technical Specifications
Table D.1 lists the technical specifications for the AutoView 3100/3200 switch.
Table D.1: AutoView 3100/3200 Switch Product Specifications
Number
Types
Connectors
Sync Types
Plug and Play
Video Resolution
Supported Cabling
Number
Type
Connector
Number
Type
Connector
Number
Type
Connectors
Number
Type
Height x Width x Depth
Weight
Server Ports
16 (AutoView 3100/3200 switches)
AVRIQ-PS/2, AVRIQ-USB, AVRIQ-USB2, AVRIQ-USB2L, AVRIQ-VSN (Sun
VGA), AVRIQ-SRL and IAC modules
RJ-45
Separate horizontal and vertical
DDC2B
640 x 480 @ 60 Hz (Local Port and Remote Port Minimum)
800 x 600 @ 75 Hz
960 x 700 @ 75 Hz
1024 x 768 @ 75 Hz
1280 x 1024 @ 75 Hz (Remote Port Maximum using an AVRIQ or IAC module)
1600 x 1200 @ 75Hz (Local Port Maximum using an AVRIQ or IAC module)
4-pair UTP CAT 5 or CAT 6, 100 feet (30 meters) maximum length
SETUP Port
1
Serial RS-232
RJ-45 with RJ-45 to DB-9 (female) adaptor
Network Connection
1
Ethernet: IEEE 802.3 2002 Edition - 10BaseT, 100BaseT, 1000BaseT
RJ-45
Local Port
1
PS/2, USB and VGA
PS/2 MiniDIN, USB 2.0 and 15-pin D-Sub
USB Device Port
4
USB 2.0
Dimensions
1.72 x 17.00 x 10.98 in; 1U form factor
(4.37 x 43.18 x 27.08 cm)
7.3 lbs (3.31kg) without cables
76 AutoView 3100/3200 Switch Installer/User Guide
Table D.1: AutoView 3100/3200 Switch Product Specifications (Continued)
AC-input Power
AC-input Range
AC-input Current Rating
AC-input Cable
AC Frequency
Power Supply
40 W maximum
100 - 240 VAC
0.5A
18 AWG three-wire cable, with a three-lead IEC-320 receptacle on the power supply end and a country-dependent plug on the power resource end
50 - 60 Hz autosensing
Ambient Atmospheric Condition Ratings
Temperature
32 to 104 degrees Fahrenheit (0 to 50 degrees Celsius) operating;
-4 to 158 degrees Fahrenheit (-20 to 70 degrees Celsius) nonoperating
10 - 95% noncondensing Humidity
Safety and EMC Approvals and Markings
UL, FCC, cUL, ICES-003, CE, VCCI, GS, MIC, C-Tick, GOST
Safety certifications and EMC certifications for this product are obtained under one or more of the following designations: CMN (Certification Model Number), MPN (Manufacturer’s Part Number) or Sales Level Model designation. The designation that is referenced in the EMC and/or safety reports and certificates are printed on the label applied to this product.
