advertisement
Reference 55-85
User manual
External devices
Connecting active loudspeakers
If you want to use active speakers, you can connect them with an adapter cable to the TV set.
Plug a network cable (Category 5e or higher) to the AUDIO LINK port of the TV set. Connect the Ethernet cable to the RJ45 socket of the Digital Audiolink / Audiolink converter available as accessory. To the other end of the convertor you connect the adaptor cable Audiolink / 30cm / 9pin + 5.1 Out + Center In . Connect the cinch connectors of the adaptor cable to the cinch connectors of the speakers / subwoofer.
The cinch connections of the adaptor cable are labelled:
Connecting the HiFi/AV amplifier
Connecting digital HiFi/AV amplifiers
Connect the digital audio output of the TV set SPDIF OUT to the digital audio input of the amplifier via a cinch cable:
Digital amplifier
DIGITAL IN
TV set
R for Front right
L for Front left
C for
SR for Surround right
SL for Surround left
SUB for Subwoofer SPDIF
OUT
The connections for the adaptor cable are pre-amplifier outputs. Therefore, only active loudspeakers / active subwoofers may be connected directly to the adaptor cable.
Front left Center
Subwoofer
Front right
Connect digital audio (pre) amplifier via audio return channel
(HDMI ARC)
Connect the HDMI1 socket of the TV using an HDMI cable with the
HDMI socket of the ARC-compatible audio (pre) amplifier (e.g.
Loewe
MediaVision 3D ). It is not necessary to log-in the amplifier separately with the TV set.
Surround left
Adapter cable
Converter
Digital Audiolink / Audiolink
CENTER
IN
Surround right
Connecting analogue HiFi/AV amplifiers
Use a stereo cinch/jack adaptor cable to connect the analogue audio output AUDIO OUT to the analogue audio input of the amplifier:
TV set
Analogue amplifier
AUDIO IN
L R
TV set AUDIO
OUT
Ethernet cable
(Cat. 5e or higher)
DIGITAL
AUDIO
LINK
Connection of active speakers to the TV set
Reproducing sound via an HiFi/AV amplifier
The sound reproduction via connected HiFi/AV amplifiers can be adjusted in the sound components wizard (see chapter System settings , section Connections – Sound components ).
Sound reproduction via the speaker system
The settings for sound reproduction via active speakers you find in the sound components wizard (see chapter System settings , section
Connections – Sound components ).
128
advertisement
Related manuals
advertisement
Table of contents
- 119 System settings (continued)
- 119 Extras
- 119 DR+ Streaming
- 120 Integrated features
- 120 Reset to factory settings
- 121 Conditional Access module (CA module)
- 123 External devices
- 123 Devices to the HDMI connections
- 124 Digital Link HD
- 125 Devices on AV
- 127 Connecting the speaker system (AUDIO OUT)
- 127 Connecting the speaker system (DAL)
- 128 Connecting active loudspeakers
- 128 Connecting the HiFi/AV amplifier
- 129 Audio playback from external devices
- 129 IR-Link
- 129 Serial interface RS-232C (RJ12)
- 130 Setting the remote control
- 131 Teaching the remote control
- 133 Loewe Apps
- 133 Smart tv2move App
- 134 Smart Assist App
- 135 Troubleshooting
- 137 Technical Data
- 138 Signals via AV (PC IN) / HDMI
- 138 Signal input groups
- 139 Accessories
- 139 Upgrade kits / conversion kits / cables
- 140 Mounting options
- 141 VESA standard
- 142 Environment
- 142 Legal information
- 143 Miscellaneous
- 143 Screen cleaning
- 147 CA module error codes
- 148 Glossary
- 151 EC Declaration of Conformity
- 152 Index
- 156 Service
- 157 Code page
- 159 Notes