advertisement
SN29402761A_TX-NR575E_BAS_En_171107.book 27 ページ ２０１７年１１月６日 月曜日 午前１１時２９分
> Before Start > Part Names > Install > Initial Setup > Playback
Listening To the AM/FM Radio
1 2 3
You can receive AM and FM radio stations on this unit with the built-in tuner. Perform the following procedure when the unit is on.
∫ Tuning into a Radio Station
Tuning Automatically
1. Press TUNER (a) on the remote controller repeatedly to select either
"AM" or "FM" on the display.
2. Press MODE (e) on the remote controller, so that the "TunMode: Auto" is displayed on the display.
3. When you press the cursors S / T buttons (b) on the remote controller, automatic tuning starts, and searching stops when a station is found. When tuned into a radio station, the "TUNED" indicator on the display lights. When tuned into an FM radio station, the "FM
ST" indicator lights.
When FM broadcasts reception is poor:
Perform the procedure for "Tuning
Manually" in the following section. Note that if you tune manually, the reception for
FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
Tuning Manually
Note that if you tune manually, the reception for FM broadcasts will be monaural rather than stereo, irrespective of the sensitivity of the reception.
1. Press TUNER (a) on the remote controller repeatedly to select either
"AM" or "FM" on the display.
2. Press MODE (e) on the remote controller, so that the "TunMode:
Manual" is displayed on the display.
3. While pressing the cursors S / T (b) on the remote controller, select the desired radio station.
0 The frequency changes by 1 step each time you press the cursors S /
T . The frequency changes continuously if the button is held down and stops when the button is released.
Frequency step setting:
Press the button, the cursor buttons and
ENTER on the remote controller to select
"7. Miscellaneous" – "Tuner" – "AM
Frequency Step" and select the frequency step for your area. Note that when this setting is changed, all radio presets are deleted.
c b a d e
27
SN29402761A_TX-NR575E_BAS_En_171107.book 28 ページ ２０１７年１１月６日 月曜日 午前１１時２９分
> Before Start > Part Names > Install > Initial Setup > Playback
28
1 2
∫ Presetting a Radio Station
You can preset up to 40 stations.
Registration Procedure
1. Tune into the AM/FM radio station you want to register.
2. Press MEMORY (d) on the remote controller so that the preset number on the display flashes.
While the preset number is flashing
(about 8 seconds), repeatedly press the cursors W / X (b) on the remote controller to select a number between 1 and 40.
3. Press MEMORY again on the remote controller to register the station.
When registered, the preset number stops flashing. Repeat this procedure for all of your favorite AM/FM radio stations.
3
Selecting a Preset Radio Station
1. Press TUNER (a) on the remote controller.
2. Press cursors W / X (b) on the remote controller to select a preset number.
Deleting a Preset Radio Station
1. Press TUNER (a) on the remote controller.
2. Press cursors W / X (b) on the remote controller to select the preset number to delete.
3. After pressing MEMORY (d) on the remote controller, press CLEAR (c) while the preset number is flashing to delete the preset number. When deleted, the number on the display goes off.
∫ Using RDS
RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. In regions using RDS, the radio station name is displayed when you tune into a radio station broadcasting program information. When you press on the remote controller in this state, you can use the following functions.
Display Text Information (Radio
Text)
While the name of the station is being displayed on the display, press on the remote controller once.
Radio Text (RT) broadcast by the station is displayed scrolling across the display. "No
Text Data" is displayed when no text information is available.
Search for Stations by Program
Type
1. While the name of the station is being displayed on the display, press on the remote controller twice.
2. Press W / X on the remote controller to select the Program Type you want to find, then press ENTER to start the search.
0 The Program Types displayed are as follows: None / News (News reports) /
Affairs (Current affairs) / Info
(Information) / Sport / Educate
(Education) / Drama / Culture /
Science (Science and technology) /
Varied / Pop M (Pop music) / Rock M
(Rock music) / Easy M (Middle of the road music) / Light M (Light classics) /
Classics (Serious classics) / Other M
(Other music) / Weather / Finance /
Children (Children’s programmes) /
Social (Social affairs) / Religion /
Phone In / Travel / Leisure / Jazz
(Jazz music) / Country (Country music) / Nation M (National music) /
Oldies (Oldies music) / Folk M (Folk music) / Document (Documentary)
0 The information displayed may sometimes not match the content being broadcast by the station.
3. When a station is found, the station flashes on the display. Press ENTER while this is happening to start receiving that station. If you don't press ENTER, the unit continues to search for another station.
0 If no stations are found, the message
"Not Found" is displayed.
0 Unusual characters may be displayed when the unit receives unsupported characters. However, this is not a malfunction. Also, if the signal from a station is weak, information may not be displayed.
advertisement