e_kb494.book Page 114 Wednesday, February 3, 2010 5:12 PM
3
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
Auto The sensitivity is automatically adjusted by the camera. (Sensitivity 80 - 800)
80
The lower the sensitivity, the less noise that affects the image. The shutter speed will be slower in low light conditions.
100
200
400
800
1600
3200
6400
Higher sensitivity settings use faster shutter speeds in low light conditions to reduce camera shake, but the image may be affected by noise.
1
Press the 3 button in A mode.
The [ A Rec. Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Sensitivity].
3
Press the four-way controller ( 5 ).
A pull-down menu appears.
4
Use the four-way controller
( 23 ) to change the sensitivity.
Rec. Mode
Recorded Pixels
White Balance
AF Setting
AE Metering
Sensitivity
EV Compensation
1/3
12
M
Auto
80
100
200
400
MENU Cancel OK OK
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
114
