e_kb494.book Page 128 Wednesday, February 3, 2010 5:12 PM
Saving the Settings (Memory)
3
The Memory function is for saving the current camera settings when the camera is turned off.
For some camera settings, the Memory function is always set to O (On)
(the settings are saved when the camera is turned off), while for others you can choose on or off (to choose whether the settings are saved or not when the camera is turned off). The items which can be set to O (On) or P (Off) in the Memory function are shown in the table below. (Items not listed here are always saved in the selected settings when the camera is turned off.)
If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off. If you select P (Off), the settings will be reset to the defaults when the camera is turned off. The table below also shows whether the Memory default setting for each item is on or off.
Item Description
Default
Setting
Page
Face
Detection
Flash Mode
Drive Mode
A Face Detection mode set by using the I button
The flash mode set with the four-way controller (
The drive mode set with the four-way controller (
4
2
)
)
P
Focus Mode The focus mode set with the four-way controller ( 5 ) P
Zoom Position The zoom position set with the zoom lever
MF Position
White Balance
The manual focus position set with the four-way controller ( 23 )
The [White Balance] setting on the [ A Rec. Mode] menu
P
P
P
p.70
O
p.100
P
p.90
p.91
p.102
p.76
p.103
p.110
Sensitivity
EV
Compensation
AE Metering
Digital Zoom
DISPLAY
The [Sensitivity] setting on the [ A Rec. Mode] menu
The [EV Compensation] setting on the
[ A Rec. Mode] menu
The [AE Metering] setting on the [ A Rec. Mode] menu
The [Digital Zoom] setting on the [ A Rec. Mode] menu
The information display mode set with the
4 / W button
P
P
P
O
P
p.114
p.108
p.112
p.77
p.20
128
e_kb494.book Page 129 Wednesday, February 3, 2010 5:12 PM
File No.
If a new SD Memory Card is inserted when O (On) has been selected, file numbers are assigned sequentially
1
Press the 3 button in A mode.
The [ A Rec. Mode] menu appears.
O —
2
Use the four-way controller ( 23 ) to select [Memory].
3
Press the four-way controller ( 5 ).
The [Memory] screen appears.
4
Use the four-way controller
( 23 ) to choose an item.
Memory
Face Detection
Flash Mode
Drive Mode
Focus Mode
Zoom Position
MF Position
1/3
MENU
5
Use the four-way controller ( 45 ) to select O or P .
6
Press the 3 button twice.
The camera returns to capture status.
3
129
130 e_kb494.book Page 130 Wednesday, February 3, 2010 5:12 PM
Memo
e_kb494.book Page 131 Wednesday, February 3, 2010 5:12 PM
4
Playing Back and
Deleting Images
Playing Back Images .............................. 132
Deleting Images and Sound Files .......... 146
Connecting the Camera to AV Equipment
................................................................... 155
