Programming
Parameter
Outlet switchover
Pump pressure
Beverage outlet pos.
Product test
Select grinder
Grind quantity
9.0 g
Strokes per button
Water volume
40 ml
Bypass sequence
Bypass water
0.0 sec
Compression pressure
Pre-brewing
Chamber opening
2 x grind quantity
14.0 g
2 x compression pressure
2 x chamber opening
Parameter
Selecting product
> Press button <
Counted products
Outlet variant
BASCAP_EN
V07 | 01.2018
www.schaerer.com
Parameter description
Shows the outlet switchover.
Shows the pump pressure.
Shows the position of the automatic beverage outlet.
Dispense test product.
Shows the selected grinder.
Quantity of coffee powder.
Adjustment range
Yes/No
Yes/No
0 - 99
-
Left
Right
Left and right
4.0 – 16.0 g
-
Note
For information only
For information only
For information only
For information only
Default: 9.0 g
(Max.: 14.0 g.; depends on grinding level.)
For information only Shows the number of strokes per button.
Volume of coffee water.
-
1 – 600 ml Default: Espresso 40 ml, coffee 60 ml
Affects brewing accelerator. Defines when additional water
(bypass water) is dispensed.
Bypass water volume.
Without brewing accelerator.
With coffee
Before/after coffee
0.0 – 30.0 sec
Shown only if the machine is fitted with the brewing accelerator option.
Default: 0.0 sec
Shown only if the machine is fitted with the brewing accelerator option.
For information only Shows the compression pressure level.
Shows whether pre-brewing is active or inactive.
Shows how long the chamber is open.
Quantity of coffee powder.
-
-
Level 1 – 5
4.0 – 16.0 g
For information only
For information only
14.0 g
(Max.: 14.0 g: depends on grinding level). Shown only if
"Double product" is programmed in the dispensing mode menu.
For information only Shows the double product compression pressure level.
Shows how long the chamber is open in the case of a double product.
-
Level 1 – 5
For information only
Beverages with milk (e.g. cappuccino)
Parameter description
Select the required beverage button.
-
Adjustment range
Shows the number of dispensed beverages.
Shows how the product is dispensed.
E.g. milk before coffee
-
Milk before coffee
Milk after coffee
Milk at the same time
-
Note
For information only
For information only
53
www.schaerer.com
Parameter
Prod. preselection
Dispensing mode
Outlet switchover
Pump pressure
Beverage outlet pos.
Product test
Select grinder
Grind quantity
9.0 g
Strokes per button
Water volume
40 ml
Bypass sequence
Bypass water
0.0 sec
Compression pressure
Pre-brewing
Chamber opening
2 x grind quantity
14.0 g
2 x compression pressure
2 x chamber opening
Cold milk time
0.0 sec
Hot milk time
0.0 sec
54
Programming
Parameter description
Beverage preselection active/inactive. The beverages are dispensed one after another in the previously programmed order.
Shows the dispensing mode.
Adjustment range
Yes/No
Shows the outlet switchover.
Shows the pump pressure.
Shows the position of the automatic beverage outlet.
Dispense test product.
Shows the selected grinder.
Quantity of coffee powder.
-
Double product
Normal
Yes/No
Yes/No
0 - 99
Left
Right
Left and right
4.0 – 16.0 g
-
Note
For information only
For information only
For information only
For information only
For information only
For information only
Default: 9.0 g
(Max.: 14.0 g.; depends on grinding level.)
For information only Shows the number of strokes per button.
Volume of coffee water.
-
10 – 600 ml Default: Espresso 40 ml, coffee 60 ml
Affects brewing accelerator. Defines when additional water
(bypass water) is dispensed.
Bypass water volume.
Without brewing accelerator.
With coffee
Before/after coffee
0.0 – 30.0 sec
Shown only if the machine is fitted with the brewing accelerator option.
Default: 0.0 sec
Shown only if the machine is fitted with the brewing accelerator option.
For information only Shows the compression pressure level.
Shows whether pre-brewing is active or inactive.
Shows how long the chamber is open.
Quantity of coffee powder.
-
-
Level 1 – 5
4.0 – 16.0 g
For information only
For information only
14.0 g
(Max.: 14.0 g: depends on grinding level). Shown only if
"Double product" is programmed in the dispensing mode menu.
For information only Shows the double product compression pressure level.
Level 1 – 5
Shows how long the chamber is open in the case of a double product.
-
Duration of cold milk dispensing. 0.0 – 40.0 sec
For information only
Duration of hot milk dispensing.
0.0 – 40.0 sec
Standard: 0.0 sec
Available only for machines with cold milk system or under-counter milk system.
Default: 0.0 sec
Available only for machines with milk system.
BASCAP_EN
V07 | 01.2018
