The Embedded Web Server. Xerox VersaLink C7000

Getting Started

The Embedded Web Server

The Embedded Web Server is the administration and configuration software that is installed in the printer. It allows you to configure and administer the printer from a Web browser.

The Embedded Web Server requires:

• A TCP/IP connection between the printer and the network in Windows, Macintosh, UNIX, or Linux environments.

• TCP/IP and HTTP enabled in the printer.

• A network-connected computer with a Web browser that supports JavaScript.

At your computer, open a Web browser. In the address field, type the IP address of the printer, then press Enter or Return .

To install the print driver for a network-connected printer, you need the IP address of your printer. You also need the IP address to access the settings of your printer through the Embedded Web Server. You can view the IP address of your printer on the control panel or on the Configuration Report.

Note: To view the TCP/IP address on the control panel, wait until the printer has been on for 2 minutes. If the TCP/IP address is 0.0.0.0, or begins with 169, it indicates a network connectivity issue. However, note that if Wi-Fi is set as the primary Ethernet connection, 0.0.0.0 is shown for the printer’s IP address.

To view the IP address of the printer on the control panel:

1. At the printer control panel, press the Home button.

2. Touch Device → About .

3. Record the IP address from the display.

4. To return to the Home screen, press the Home button.

To obtain the printer IP address from the Configuration Report:

1. At the printer control panel, press the Home button.

2. Touch Device → About → Information Pages .

3. Touch Configuration Report .

The IP address appears in the Connectivity section of the Configuration Report for IPv4 or IPv6.

4. To return to the Home screen, press the Home button.

34 Xerox ® VersaLink ® C7000 Color Printer

User Guide