2
4
Rotate the memory card cover as shown by 3 , and slide it in the direction of
4 .
4
3 u Caution
• When inserting a memory card into the memory card slot, insert it straight. Inserting the memory card at an angle or applying excessive force may damage the card or memory card slot.
• Do not remove the memory card while the card access lamp is lit.
• If the memory card cover is opened while the power is on, the camera turns off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.43)
• Use a high-speed memory card when recording movies. If the writing speed cannot keep up with the recording speed, writing may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Recording
Settings” (p.48).
• Memory cards compatible with the UHS-I/UHS-II standard can be used. However, if an UHS-II memory card is inserted in the SD2 slot, it operates at a speed equivalent to UHS-I.
Initial Settings
Turn the camera on and make the initial settings.
Turning the Camera On
1
Turn the main switch to
[ON].
The first time the camera is turned on after purchase, the
[Language/ W ] screen appears.
t Memo
• The power automatically turns off when you do not perform any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off] of the
D 5 menu. The camera recovers from Auto Power Off when
0 or 3 is pressed.
42
Setting the Display Language, Date and
Time, and Color
1
Use AB to select the desired language in the
[Language/ W ] screen, and press E .
The selected language is set and the [Date Adjustment] screen appears.
2
Set the display format and the date and time.
Use CD to select an item and
AB to change the value.
Press F to cancel the setting.
Date Adjustment
Set the Date Format,
Date and Time.
M/D/Y
Cancel
01 / 01 / 2021 00 ： 00
OK
3
Press E .
The date and time are set and the [Color Settings] screen appears.
4
Make settings for [Color] and [Style].
Use CD to select an item and
AB to change the value.
Color Settings
Color 01
F F
Style 1
Cancel OK
Color
Style
Sets the display color of the status screen, control panel, and menu cursor.
Sets the style of the status screen and control panel.
5
Press E .
The camera switches to the capture mode and is ready to take an image.
t Memo
• You can change the settings of the display language and date and time in the D 7 menu, and the display color in [Color
Settings] of [Monitor Display] in the E
4 menu. (p.36, p.108)
Formatting a Memory Card
1
Press F .
The menu appears.
2
Turn Q to select D .
3
Select [Format] and press
D .
The [Format] screen appears.
D 1
4
Use AB to select the memory card slot in which the memory card to format is inserted and press D .
Format
SD1
SD2
File Setting
Format
Create New Folder
Folder Name
File Name
Sequential Numbering
Reset Numbering
Copyright Information
Date
IMGP
Off
5
Use A to select [Execute] and press E .
Formatting starts. When formatting is completed, the screen of Step 4 reappears.
Deletes all data on the SD1 slot memory card.
Execute
Cancel
OK
6
Press F twice.
The screen in the capture mode reappears.
u Caution
• Do not remove the memory card while formatting, or the card may be damaged.
• Formatting deletes all data, both protected and unprotected.
t Memo
• When a memory card is formatted, the volume label “K-3 III” is assigned to the card.
2
43
