6-3 Manual Datalogger. Lutron Electronics DM-9962SD

Remark :

* How to set the sampling time, refer to Chapter 8-2 , page 24 .

* How to set the beeper sound is enable, refer to

Chapter 8- 4, page 25 .

b. Pause the datalogger

During execute the Datalogger function, if press the

" LOG Button " ( 3-8, Fig. 1 ) once will pause the

Datalogger function ( stop to save the measuring data into the memory circuit temporally ). In the same time the " LOGGER " symbol will stop flashing.

Remark :

If press the " LOG Button " ( 3-8, Fig. 1 ) once again will execute the Datalogger again, the " LOGGER " symbol will flashing.

c. Finish the Datalogger

During execute the Datalogger function, press the

" LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds continuously again will finish the Datalogger function, the " LOGGER " text will be disappeared and finish the Datalogger function.

6-3 Manual Datalogger ( Set sampling time = 0 seconds ) a. Set sampling time is to 0 seconds

Press the " LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds, the LCD will show the indicator " LOGGER " and " " symbol then press the " LOG Button " ( 3-8, Fig. 1 ) once , the

" " and " Position no. " symbol will flashing once and Beeper will sound once, at the same time the measuring data along the time information will be saved into the memory circuit .

19