Output Circuit Breaker Field Replacement and Repair. Eaton Electrical APS6-059, APS3-060, APS3-061, 10640205, APS3-058, APS6-058, APR48, APS3-059
Add to my manuals
29 Pages
advertisement
Data Power Solutions Quick Start Guide
Output Circuit Breaker Field Replacement and Repair
UL Listed Mark
The APS3-058, APS3-059, APS3-060, APS3-061, APS6-058 and APS6-059 series of power supplies have been approved by Underwriters Laboratories Inc and are permitted to carry the UL Listed mark.
Under rules and regulations set by UL, all manufactured units have been subjected to their
“Follow Up Service” (FUS) procedure that ensures compliance with the relevant safety standards, that the correct components have been fitted, and appropriate tests have been performed.
To retain the UL mark, only Eaton service engineers, or those persons trained by Eaton, are permitted to replace an output circuit breaker or repair a unit.
Desktop variants APS3-060 & APS3-061
In the field it is not possible for a service engineer to change output circuit breakers on desktop variants APS3-060 or APS6-061.
Battery Input Circuit Breakers
In the field it is not possible for a service engineer to change battery circuit breakers on variants APS3-059, APS3-061 or APS6-059.
Contact Information
•
For circuit breaker replacement, or repair, please contact your local Eaton dc Products sales office listed on page 4.
- 4.
联系信息
• 关于断路器的更换或修理的信息,请联系第 4页列出的当地Eaton销售办事处。
Contacts
•
Pour remplacer ou réparer un disjoncteur, contacter votre revendeur local Eaton indiqué en page 4.
Kontaktinformationen
•
Wenden Sie sich bezüglich Austausch oder Reparatur des Schutzschalters an Ihr nächstes
Eaton-Verkaufsbüro (siehe Seite 4).
Informazioni di contatto
•
Per la sostituzione degli interruttori o la loro riparazione, contattare l'ufficio vendite Eaton più vicino in base all'elenco a pagina 4.
Información de contacto
•
Para reemplazar o reparar los interruptores de circuito, sírvase contactar con la oficina de ventas local de Eaton que aparece listada en la página 4.
Copyright © 2006-2009 Eaton Corporation. All Rights Reserved.
10640205 February 2009
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Worldwide Support
- 4 For Further Information and Technical Assistance
- 5 General Description
- 5 APS3 and APS6 Series (48V) DC Power Systems
- 5 Access Power Rectifiers
- 5 SM45 Supervisory Module
- 6 Low Voltage Disconnect (if applicable)
- 6 Pre-Installation
- 6 Warnings
- 6 Inputs
- 9 Equipment Classification
- 9 Outputs
- 10 Batteries (if applicable)
- 10 Rectifiers
- 12 Location and Environment
- 12 Servicing
- 13 EMC Compliance
- 14 Inspecting the Equipment and Reporting Damage
- 14 Installation
- 14 Mounting the APS DC Power System
- 16 Connecting the DC Load Cables
- 19 Installing the External Batteries (if applicable)
- 22 Connecting the Battery Cables (if applicable)
- 24 Installing the Battery Temperature Sensor (if batteries are fitted)
- 24 Connecting the APS DC Power System to the AC Supply
- 25 Commissioning
- 25 Inserting the Access Power Rectifiers
- 25 Pre-Power-Up Check
- 26 Applying AC Power
- 26 Configuring the APS DC Power System for Operation
- 26 Applying DC Power to the Load
- 27 Output Circuit Breaker Field Replacement and Repair
- 27 UL Listed Mark
- 27 Desktop variants APS3-060 & APS
- 27 Battery Input Circuit Breakers
- 27 Contact Information
- 28 Specifications