7.2 The audio jack cable. Silvercrest SKM 40 C1

SilverCrest SKM 40 C1

7.2 The audio jack cable

The two 3.5mm jack plugs of the supplied audio connection cable differ slightly from each other.

1.

2.

Headset connection (2 rings)

Audio source connection (3 rings)

Take care that the cable is connected properly to ensure the correct functioning of the built-in microphone (5) in the audio jack cable (B). Also refer to the

"Using the headset" section.

7.3 Using the headset

WARNING!

To avoid hearing damage, you must set the volume of your audio source to the lowest level before connecting the headset. You can then adjust the volume to the desired level.

Insert the jack plug (4) of the audio jack cable (B) into one of the jack sockets

(6) on the headset earpieces (3). To ensure the correct functioning of the microphone (5), the jack plug (4) with the two rings and the headphone symbol must be inserted into the jack socket (6) of the headset (A).

7.4 The microphone

You can communicate easily via the built-in microphone (5) in the audio jack cable (B) if you are using the headset (A) normally or as a hands-free kit.

English - 11