Battery Maintenance. Simplicity 1693689, 1694088, ZT Series

Regular Maintenance

BATTERY MAINTENANCE

Checking the Battery Fluid

Note: Does not apply to maintenance-free batteries.

1. Raise the seat deck to access battery.

2. Remove the battery filler cap (C, Figure 24). Fluid must be even with the split ring full mark. If not, add distilled water.

3. Reinstall the filler cap.

Cleaning the Battery and Cables

1. Disconnect the cables from the battery, negative cable first (B, Figure 24).

2. Remove the battery and clean the compartment with a solution of baking soda and water.

3. Clean the battery terminals and cable ends with a wire brush until shiny.

4. Reinstall the battery and reattach the battery cables, positive cable first (see A, Figure 24)

5. Coat the cable ends and battery terminals with petroleum jelly or non-conducting grease.

WARNING

Be careful when handling the battery. Avoid spilling electrolyte. Keep flames and sparks away from the battery.

When removing or installing battery cables, disconnect the negative cable FIRST and reconnect it LAST. If not done in this order, the positive terminal can be shorted to the frame by a tool.

A

B

C

Figure 24. Checking & Cleaning Battery

A. Positive Battery Terminal

B. Negative Battery Terminal

C. Battery Cap

00

19