3. Adding New Peripheral Devices to the Extender. Essence WeRaHome ESUGSL038
Add to My manuals16 Pages
advertisement
Adding New Peripheral Devices to the Extender
3.
Adding New Peripheral Devices to the Extender
You can add up to 63 devices to an extender.
Adding a new peripheral device to the extender involves:
Adding each device to WeR@Home™ by pairing the device with the extender
Installing the device in the chosen location
To add a device:
1.
Tap . The main menu appears.
2.
Tap DEVICES . The Devices screen appears.
3.
Tap Add device . The Add New Devices screen appears displaying a list of the available device types.
4.
Select a device type. The Connect to screen appears displaying the hub and extenders.
NOTE: If you select a device which must be connected to the hub, the Connect to screen is not displayed, and instead the Pairing screen appears.
5.
Tap the extender you want to add the device to. The Pairing screen appears and WeR@Home ™ scans for the device.
6.
Place the device close to the extender.
7.
If the device has a tamper switch, activate the tamper.
8.
Insert the batteries.
9.
When prompted by the app, enter the device’s system name and/or location and other device attributes.
10.
Tap OK .
11.
If you want to configure the device, tap Configure . Refer to ESUGSL018 WeR@Home ™ User Guide.
12.
Install the device in the chosen location. Refer to ESUGSL019 WeR@Home ™ Installation Guide.
WeR@Home™ Smart Extender 8
advertisement
Related manuals
advertisement
Table of contents
- 3 1. Introduction
- 5 2. Installing the Extender
- 5 2.1. Finding a Suitable Location
- 5 2.2. Setting Up the Extender
- 8 3. Adding New Peripheral Devices to the Extender
- 9 4. Moving Devices from Hub to Extender or Extender to Hub
- 10 5. Using an Extender
- 13 6. Removing an Extender
- 14 Appendix A Technical Specifications
- 16 Legal Notice