advertisement
BN68-00883S-01Eng.qxd 1/4/04 5:30 PM Page 58
T
I M E
S
E T T I N G
Setting the On/Off Timer
1
Press the MENU button to display the menu.
Press the UP/DOWN buttons to select “Setup”, then press the ENTER button.
Press the UP/DOWN buttons to select “Time”, then press the ENTER button.
2
Press the UP/DOWN buttons to select
“On Timer”, then press the
ENTER button.
Press the UP/DOWN buttons repeatedly to select the appropriate “Hour”.
Press the LEFT/RIGHT buttons to select “Minute”.
Press the UP/DOWN buttons repeatedly to select the appropriate “Minute”.
Set other items using the same method as above.
Before using the timer, you must set the TV’s clock.
When you set the hours, make sure the correct time of day (am or pm) appears to the right of the time.
You can also set the time using the number buttons on the remote.
Continued...
English58
BN68-00883S-01Eng.qxd 1/4/04 5:30 PM Page 59
T
I M E
S
E T T I N G
3
Press the LEFT/RIGHT buttons to select “Activation”.
Press the UP/DOWN buttons to set the On Time
“Yes”.
When finished, press the
ENTER button.
4
To set the Off time, press the
UP/DOWN buttons to select “Off Timer”.
Press the ENTER button and set the hours and minutes.
(Follow the same procedure as in steps 2 and 3 above).
5
When finished setting the timer, press the EXIT button to exit.
• Auto Power Off
When you set the timer on, your television will be turned off if you do not operate any controls for 3 hours after the TV has been turned on with the ‘Timer On’ function.
To deactivate the “On Timer,” select “No” during this step.
Repeatedly pressing the
UP/DOWN buttons will alternate between
“Yes” and “No”.
You can also set the time using the number buttons on the remote.
English59
advertisement
Related manuals
advertisement
Table of contents
- 6 List of Features
- 6 List of Parts
- 7 Familiarizing Yourself with Your New TV
- 7 Buttons on the Lower-Right Part of the Panel
- 8 Rear Panel Jacks
- 9 Remote Control
- 11 Installing Batteries in the Remote Control
- 12 Connecting VHF and UHF Antennas
- 12 Antennas with 300-ohm Flat Twin Leads
- 13 Antennas with 75-ohm Round Leads
- 13 Separate VHF and UHF Antennas
- 14 Connecting Cable TV
- 14 Cable without a Cable Box
- 14 Connecting to a Cable Box that Descrambles All Channels
- 14 Connecting to a Cable Box that Descrambles Some Channels
- 16 Connecting a VCR
- 18 Connecting an S-VHS VCR
- 19 Connecting a DVD Player
- 20 Connecting a Digital TV Set-top box
- 21 Connecting a DVD/Set-top box via DVI
- 22 Connecting a DVD/Set-top box via HDMI
- 23 Connecting a PC
- 24 Turning the TV On and Off
- 24 Changing Channels
- 24 Using the Channel Buttons
- 24 Using the Number Buttons
- 24 Using the PRE-CH Button to select the Previous Channel
- 25 Adjusting the Volume
- 25 Using Mute
- 26 Viewing the Display
- 26 Viewing the Menus
- 27 Plug & Play Feature
- 29 Memorizing the Channels
- 29 Selecting the Video Signal-source
- 30 Storing Channels in Memory (Automatic Method)
- 31 Adding and Erasing Channels (Manual Method)
- 32 To Select the Source
- 33 To Edit the Input Source Name
- 34 Using Automatic Picture Settings
- 35 Customizing the Picture
- 36 Adjusting the Color Tone
- 37 Changing the Screen Size
- 38 Zoom
- 39 Freezing the Picture
- 39 Digital Noise Reduction
- 40 DNIe (Digital Natural Image engine)
- 41 My Color Control
- 41 Easy Control
- 42 Detail Control
- 43 Dynamic Contrast
- 44 Brightness Sensor
- 45 Viewing Picture-in-Picture
- 45 Activating Picture-in-Picture
- 46 Selecting a Signal Source (External A/V) for PIP
- 46 Swapping the Contents of the PIP and Main image
- 46 Changing the PIP Channel
- 47 Changing the Size of the PIP Window
- 47 Changing the Position of the PIP Window
- 48 Using Automatic Sound Settings
- 49 Customizing the Sound
- 50 Setting the TruSurround XT (SRS TSXT)
- 51 Choosing a Multi-Channel Sound (MTS)Soundtrack
- 52 Automatic volume control
- 53 Selecting the Internal Mute
- 54 Selecting the Main or Sub (PIP) Sound
- 55 Fine Tuning Channels
- 56 Using Your TV as a Computer (PC) Display
- 56 Setting Up Your PC Software (Based on Windows XP)
- 57 How to Auto Adjust
- 58 Adjusting the Screen Quality
- 59 Changing the Screen Position
- 60 Initializing the Screen Position or Color Settings
- 61 Setting the Clock
- 62 Setting the Sleep Timer
- 62 Sleep timer
- 63 Setting the On/Off Timer
- 65 Selecting a Menu Language
- 66 Using the V-Chip
- 66 Setting Up Your Personal ID Number (PIN)
- 68 How to Enable/Disable the V-Chip
- 69 How to Set up Restrictions Using the ‘TV Parental Guidelines’
- 72 How to Set up Restrictions Using the MPAA Ratings:G, PG, PG-13, R, NC-17, X, NR
- 73 How to Reset the TV after the V-ChipBlocks a Channel (‘Emergency Escape’)
- 74 How to Set up Restrictions Using the ‘Canadian English’
- 75 How to Set up Restrictions Using the ‘Canadian French’
- 76 Viewing Closed Captions
- 78 Setting the Blue Screen Mode
- 79 Selecting the Melody
- 80 Identifying Problems
- 82 Installing the stand
- 82 Disconnecting the stand
- 83 Installing the Wall Mount Kit
- 84 Using the Anti-Theft Kensington Lock
- 84 Using Your TV in Another Country
- 85 Specifications
- 86 Display Modes