advertisement
RADIUS Attributes
Framed-IP-Address (8)
Specifies the IP address to be assigned to the remote user.
Usage: Used in both Access-Request and Access-Accept packets.
If the RAC configuration parameter address_origin is set to auth_server and the RADIUS server specifies a Framed-IP-Address (8) in the Access-
Accept packet, the RAC uses that framed address as the IP network address of the remote user.
If the server does not return a Framed-IP-Address (8) attribute, or if
address_origin is set to local, the RAC uses the IP address specified by the RAC remote_address configuration parameter. For information about remote_address and address_origin, see the Remote Access
Concentrator Software Reference or the Remote Annex Administrator’s
Guide for the platform you are using.
RADIUS defines two special values for Framed-IP-Address (8):
• 255.255.255.255, which indicates that the RAC allows the remote user to negotiate the address.
• 255.255.255.254, which indicates that the RAC uses DHCP to assign an address for this user. If the server returns
255.255.255.254, the RAC uses DHCP, if DHCP is supported and configured (see Managing the Remote Access Concentrator
Using Command Line Interfaces). Otherwise, the RAC uses the value of the remote_address configuration parameter.
Multiple Instances Allowed: No.
Dependencies: This attribute is meaningful only for framed IP connections. The RAC ignores it for other connection types.
10 RADIUS Attributes Reference
advertisement
Related manuals
advertisement
Table of contents
- 18 RADIUS Authentication Attributes
- 18 User-Name (1)
- 18 User-Password (2)
- 19 CHAP-Password (3)
- 19 NAS-IP-Address (4)
- 20 NAS-Port (5)
- 22 Service-Type (6)
- 25 Framed-Protocol (7)
- 26 Framed-IP-Address (8)
- 27 Framed-IP-Netmask (9)
- 27 Framed-Routing (10)
- 28 Filter-Id (11)
- 29 Framed-MTU (12)
- 29 Framed-Compression (13)
- 30 Login-IP-Host (14)
- 31 Login-Service (15)
- 32 Login-TCP-Port (16)
- 32 Unassigned (17)
- 32 Reply-Message (18)
- 33 Callback-Number (19)
- 33 Callback-Id (20)
- 34 Unassigned (21)
- 34 Framed-Route (22)
- 35 Framed-IPX-Network (23)
- 35 State (24)
- 35 Class (25)
- 36 Vendor-Specific (26)
- 36 Session-Timeout (27)
- 37 Idle-Timeout (28)
- 37 Termination-Action (29)
- 38 Called-Station-Id (30)
- 38 Calling-Station-Id (31)
- 38 NAS-Identifier (32)
- 39 Proxy-State (33)
- 39 Login-LAT-Service (34)
- 40 Login-LAT-Node (35)
- 40 Framed-AppleTalk-Link (37)
- 40 Framed-AppleTalk-Network (38)
- 41 Framed-Appletalk-Zone (39)
- 41 CHAP-Challenge (40)
- 41 NAS-Port-Type (41)
- 42 Port-Limit (42)
- 42 Login-LAT-Port (43)
- 43 RADIUS Accounting Attributes
- 43 Acct-Status-Type (40)
- 45 Acct-Delay-Time (41)
- 45 Acct-Input-Octets (42)
- 45 Acct-Output-Octets (43)
- 46 Acct-Session-Id (44)
- 46 Acct-Authentic (45)
- 46 Acct-Session-Time (46)
- 47 Acct-Input-Packets (47)
- 47 Acct-Output-Packets (48)
- 48 Acct-Terminate-Cause (49)
- 49 Acct-Multi-Session-Id (50)
- 49 Acct-Link-Count (51)
- 50 Bay Networks Vendor-Specific Attributes
- 50 Annex-Filter (VSA Bay Networks 28)
- 51 Annex-CLI-Command (VSA Bay Networks 29)
- 51 Annex-CLI-Filter (VSA Bay Networks 30)
- 52 Annex-Host-Restrict (VSA Bay Networks 31)
- 53 Annex-Host-Allow (VSA Bay Networks 32)
- 53 Annex-Product-Name (VSA Bay Networks 33)
- 54 Annex-SW-Version (VSA Bay Networks 34)
- 54 Annex-Local-IP-Address (VSA Bay Networks 35)
- 55 Annex-Tunnel-Type (VSA Bay Networks 36)
- 55 (VSA Bay Networks 37)
- 56 (VSA Bay Networks 38)
- 56 (VSA Bay Networks 39)
- 57 Annex-Tunnel-Id (VSA Bay Networks 40)
- 57 (VSA Bay Networks 41)
- 58 Annex-Callback-Port-List (VSA Bay Networks 42)