advertisement
airCam ™ Mini User Guide
Using a microSD Card
You can record video on a microSD card. The recording options for recording on the microSD card are completely separate from the airVision software recording options. microSD card recording is configurable only in the Camera
Configuration Interface.
If you haven’t already, insert a microSD card into the slot on the side of the camera until it locks into the slot.
Removing the microSD Card
1. Go to the Video tab.
2. Click Remove Memory Card .
Chapter 5: Video Tab
To remove the microSD card, push the card in to release the lock. Pull the card out.
Note: Before removing the microSD card, use the
Remove Memory Card option on the Video tab.
Formatting the microSD Card
1. Go to the Video tab.
2. Click Format Memory Card .
3. You will be prompted to confirm. Click OK .
4. Click OK . You can now safely remove the memory card.
3. You will be prompted to confirm. Click OK .
Mounting the microSD Card
If you have removed the microSD Card via the Camera
Configuration Interface but have not physically removed the card from the camera, you can mount the card again by performing the following steps:
1. Go to the Video tab.
2. Click Mount .
4. A message stating Memory card formatted will appear.
Click OK .
Ubiquiti Networks, Inc.
10
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Package Contents
- 4 System Requirements
- 4 Hardware Overview
- 6 Installation Overview
- 6 Hardware Installation
- 6 Connecting the Power
- 7 Navigation
- 8 Tools
- 9 Status
- 10 Monitor
- 13 Using a microSD Card
- 14 Video Settings
- 14 RTSP Authentication
- 14 Video Recording
- 15 SD Card
- 17 Network Settings
- 18 TCP Explicit Congestion Notification
- 18 Advanced Ethernet Settings
- 19 Ping Watchdog
- 20 SNMP Agent
- 20 Web Server
- 20 SSH Server
- 20 Telnet Server
- 21 NTP Client
- 21 Dynamic DNS
- 21 System Log
- 22 Device
- 22 Date Settings
- 22 System Accounts
- 23 Maintenance
- 26 Electrical Safety Information
- 27 General Warranty
- 28 Installer Compliance Responsibility
- 28 RF Exposure Warning
- 28 Industry Canada
- 28 CE Marking
- 29 RoHS/WEEE Compliance Statement
- 31 Ubiquiti Networks Support