Software
Verify that your unit supports the desired interface
1
. The list below indicates the interface groupings supported. Contact your nearest Datalogic service depot if you don’t know your unit’s group, or need assistance to change the unit to another interface group.
The Standard Keyboard Wedge/Wand Em./RS-232 Group supports:
• I/F Type A — PC/XT w/Alternate Key Encoding
• I/F Type B — AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &
95 w/Alternate Key Encoding
• I/F Type C — PS/2 25 and 30 w/Alternate Key Encoding
• I/F Type D — PC/XT w/Standard Key Encoding
• I/F Type E — AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 &
95 w/Standard Key Encoding
• I/F Type F — PS/2 25 and 30 w/Standard Key Encoding
• I/F Type H — IBM
®
3xxx w/102 keyboard
• I/F Type I — PS/555530T w/104 keyboard
• I/F Type J — NEC
®
9801 keyboard
• Wand Emulation
• RS-232
• WN
2
—RS-232 (SNI)
The IBM/RS-232 Group supports:
• IBM Port 5B
• IBM Port 9B
• IBM Port 17
• IBM Port E
• RS-232
• WN-RS-232
The Universal [Keyboard] Wedge Group:
• Consult the Universal Wedge Connectivity Guide
3
for more information.
• For additional configuration/programming, refer to the Universal Wedge Programming Guide 3.
1. Contact your dealer or sales representative if your desired interface is not listed. Interface group definitions are subject to change without notice.
2. Wincor Nixdorf
®
(formally SNI)
3. Contact your dealer or visit the website listed on the back cover of this manual for publications.
RF Programming Manual 7
