advertisement
21
MP3 Setting
Follow these steps to set the outgoing digital audio format of MP3 tracks (Note: The analog format is fixed to 2 channel ):
A. From Audio mode, press SETUP.
B. Select Audio mode, press ENTER.
C. Select MP3 and press ENTER.
D. Set Digital out to:
PCM (default) to output 2 channel digital from the optical/coaxial
digital audio outputs; e.g.,to a Minidisc recorder.
Off to disable MP3 digital output.
E. Press SETUP to save and exit.
Language Video Audio More Aud Rating
AC3
MP3/WMA
Others
Analog Out
5.1 channel
5.1 channel
5.1 channel
Digital Out
PCM
PCM
PCM
PCM
Raw
Off
5.1 channel
2 channel
Off
Others Setting
Follow these steps to set the outgoing analog and digital audio
Language Video Audio More Aud Rating format of others tracks:
A. From Stop mode, press SETUP.
B. Select Audio and press ENTER.
C. Select Dolby D and press ENTER.
D. Set Analog out to:
2 Channel (default) to output 2 channel stereo audio from the
stereo audio output; e.g.,to a VCR or TV.
E. Set Digital out (from Optical out) to:
AC3
MP3/WMA
Others
Analog Out
5.1 channel
5.1 channel
5.1 channel
Digital Out
PCM
PCM
PCM
PCM
Raw
Off
5.1 channel
2 channel
Off
PCM (default) to output 2 channel digital audio from the optical/coaxial digital audio outputs; e.g.,to a Minidisc recorder.
Raw t o output the raw 2 channel digital bitstream form th optical/coaxial digital audio outputs; e.g., to an external
amplifier.
Off to disable CD others audio output.
F. Press SETUP to save and exit.
More Audio Setup
The More Audio menu includes Prologic and Subwoofer settings.
Prologic Setting
The DVD player has a built-in Dolby Prologic decoder to provide virtual surround sound for PCM
(stereo) source material from the 5.1 channel analog audio outputs.
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
Language Video Audio
C. Select Prologic and press ENTER.
D. Select the desired Prologic setting and press
ENTER:
Auto stereo audio soundtracks will be output in
Dolby Prologic mode.
On all audio soundtracks will be output in Dolby
Prologic mode.
Off (default ) Dolby Prologic decoding will always
Prologic
Subwoofer
On
On
Pink Noise
DRC
Off
Off
Off
More Aud
On
Off be inactive.
E. Press SETUP to save and exit.
Rating
Subwoofer Setting
You must indicate in the menu system whether or not your audio setup includes a Subwoofer
(the 1in 5.1 sourround sound).
A. From Stop mode, press SETUP.
B. Select More Audio and press ENTER.
C. Select Subwoofer and press ENTER.
ENTER.
On (default) indicates that you are using a Subwoofer for LFE (low frequency effects) signals.
E. Press SETUP to save and exit.
Language Video Audio More Aud
Prologic
Subwoofer
Pink Noise
DRC
LPCM 48k DS
On
On
Off
Off
Off
On
Off
Rating
FRONT AND
BACK PANELS
Front Panel Functions
DVD-815 DVD/CD/MP3/CD-R/CD-RW PLAYER BUILT-IN AMPLIFIER
2 3 4 5 6 7
OPEN/CLOSE PLAY STOP
CHAPTER
PREV NEXT
SEARCH
REV FWD
8 9
1. POWER
Before plugging the power cord into the AC outlet, check to make sure all of the connections have been properly completed. When they have been, carefully plug power cord into outlet.
Press the POWER button on the front panel to power the unit.
When the unit is initially powered, a brief surge of electricity may cause interference with other electronic equipment on the same circuit. If this occurs, connect the unit to an outlet on a different circuit.
2 . OPEN/CLOSE
Use this button to open and close the disc tray while in DVD mode.
3. PLAY
Use this button to begin play function while in
DVD mode.
4. STOP
Use this button to stop play function while in DVD mode.
5 . PREV
While in the DVD status, you may press this button for previous track.
6. NEXT
While in the DVD status, you may press this button for next track.
7.
REV
While in the DVD status, you may press this button for rewind skip .
8. FWD
While in the DVD status, you may press this button for forward skip.
9. VOLUME
Use this button to control the unit's volume. It controls all six channels simultaneously.
6
Back Panel Functions
1. AUDIO OUT
Use to connect both the right and left channel line outputs as well as subwoofer output.
2. VIDEO OUTPUT
3. S-VIDEO OUTPUT
4. COAXIAL DIGITAL AUDIO OUTPUT
5. REAR
Use to connect the four terminals of the left and right surround sound speakers.
6. FRONT/MAIN
Use to connect the four terminals of the left and right front or main speakers.
4
7. CENTER/SUBWOOFER
Use to connect the four terminals of the center and subwoofer speakers.
8. 120V~60Hz
This unit comes with an AC power cord. Be sure its prongs are dry before plugging it into an electrical outlet. Take caution not to overextend the cord or walk on it.
9. COMPONENT VIDEO OUTPUT
8
SW
COAXIAL
1
R VIDEO
OUTPUT
S-VIDEO
2 3
Pr Pb
COMPONENT VIDEO OUT
Y
9 5 6 7
8
advertisement
Related manuals
advertisement