Product warranty. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB
Add to My manuals40 Pages
advertisement
![Product warranty. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB | Manualzz Product warranty. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB | Manualzz](http://s3.manualzz.com/store/data/058692747_1-a0e90017f1e52de807f4f31969c7fabc-360x466.png)
2.13
Product warranty
Beginning on the date of shipment to the customer and continuing for the period specified in the purchase contract, Seagate warrants that each product (including components and subassemblies) that fails to function properly under normal use due to defect in materials or workmanship or due to nonconformance to the applicable specifications will be repaired or replaced, at
Seagate’s option and at no charge to the customer, if returned by customer at customer’s expense to Seagate’s designated facility in accordance with Seagate’s warranty procedure. Seagate will pay for transporting the repair or replacement item to the customer.
For more detailed warranty information, refer to the standard terms and conditions of purchase for Seagate products on the purchase documentation.
The remaining warranty for a particular drive can be determined by calling Seagate Customer Service at 1-800-468-3472. Users can also determine remaining warranty using the Seagate web site ( www.seagate.com
). The drive serial number is required to determine remaining warranty information.
Shipping
When transporting or shipping a drive, use only a Seagate-approved container. Keep the original box. Seagate approved containers are easily identified by the Seagate Approved Package label. Shipping a drive in a non-approved container voids the drive warranty.
Seagate repair centers may refuse receipt of components improperly packaged or obviously damaged in transit. Contact the authorized Seagate distributor to purchase additional boxes. Seagate recommends shipping by an air-ride carrier experienced in handling computer equipment.
Storage
Maximum storage periods are 180 days within original unopened Seagate shipping package or 60 days unpackaged within the defined non-operating limits (refer to environmental section in this manual). Storage can be extended to 1 year packaged or unpackaged under optimal environmental conditions (25°C, <40% relative humidity non-condensing, and non-corrosive environment). During any storage period the drive non-operational temperature, humidity, wet bulb, atmospheric conditions, shock, vibration, magnetic and electrical field specifications should be followed.
Product repair and return information
Seagate customer service centers are the only facilities authorized to service Seagate drives. Seagate does not sanction any thirdparty repair facilities. Any unauthorized repair or tampering with the factory seal voids the warranty.
Seagate IronWolf Product Manual, Rev. L 22
advertisement
Related manuals
advertisement
Table of contents
- 6 Seagate® Technology Support Services
- 7 Introduction
- 8 About the SATA interface
- 9 Drive Specifications
- 9 Specification summary tables
- 12 Formatted capacity
- 13 LBA mode
- 13 Default logical geometry
- 13 Seek time
- 13 Start/stop times
- 14 Power specifications
- 14 Power consumption
- 16 Typical current profile
- 16 Conducted noise
- 16 Voltage tolerance
- 17 Power-management modes
- 18 Environmental limits
- 18 Temperature
- 19 Humidity
- 19 Altitude
- 19 Shock
- 20 Vibration
- 20 Acoustics
- 20 Test for Prominent Discrete Tones (PDTs)
- 21 Electromagnetic immunity
- 21 Reliability
- 21 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
- 22 HDD and SSD Regulatory Compliance and Safety
- 22 Regulatory models
- 22 Corrosive environment
- 22 Reference documents
- 23 Product warranty
- 24 Seagate® Rescue™ Data Recovery Service
- 26 Configuring and Mounting the Drive
- 26 Handling and static-discharge precautions
- 26 Configuring the drive
- 26 SATA cables and connectors
- 27 Drive mounting
- 31 SATA Interface
- 31 Hot-Plug compatibility
- 31 SATA device plug connector pin definitions
- 32 Supported ATA commands
- 34 Identify Device command
- 38 Set Features command
- 39 S.M.A.R.T. commands