Drive mounting. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB
Add to My manuals40 Pages
advertisement
![Drive mounting. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB | Manualzz Drive mounting. Seagate ST1000VN002 IronWolf 1TB, ST6000VN001 IronWolf 6TB, ST6000VN0033 IronWolf 6TB, ST3000VN007 IronWolf 3TB, ST2000VN004 IronWolf 2TB, ST4000VN008 IronWolf 4TB | Manualzz](http://s3.manualzz.com/store/data/058692747_1-a0e90017f1e52de807f4f31969c7fabc-360x466.png)
www.seagate.com
Configuring and Mounting the Drive
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting
holes. Refer to Figure 4 through
Figure 7 for drive mounting dimensions. Follow these important mounting precautions when
mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.140 inch (3.56mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 4 Mounting dimensions (6TB)
Seagate IronWolf Product Manual, Rev. L 26
www.seagate.com
Figure 5 Mounting dimensions (4TB)
Configuring and Mounting the Drive
Seagate IronWolf Product Manual, Rev. L 27
www.seagate.com
Figure 6 Mounting dimensions (3TB - 2TB)
4.010 in max
101.85 mm
1.028 in max
26.11 mm
3x 0.250 ± .010 in
6.35 ± .25 mm
BOTH SIDES
2x 1.750 in
44.45 mm
5.787 in max
146.99 mm
4.00 in
101.60 mm
1.638 in
41.61 mm
Configuring and Mounting the Drive
1.013 ± .050 in
25.73 ± 1.27 mm
0.680 ± .050 in
17.27 ± 1.27 mm
TOP OF LABEL
Temperature
Check Point
5 TYP
CL OF DRIVE
0.814 in
20.68 mm
1.122 ± .020 in
± .51 mm
3X 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.1
MAXIMUM FASTENER
PENETRATION BOTH SIDES
2x 1.625 ± .020 in
41.28 ± .51 mm
2x 0.125 in
3.18 mm
2x 3.750 in
95.25 mm
4X 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.1
MAXIMUM FASTENER
PENETRATION
0.138 in
3.51 mm
Seagate IronWolf Product Manual, Rev. L 28
www.seagate.com
Figure 7 Mounting dimensions (1TB)
4.010 in. max
101.85 mm
5.787 in. max
146.99 mm
0.795 in. max
20.20 mm
3x .250 ± .010in
6.35 ± .25mm
BOTH SIDES 2x 1.750 in
44.45 mm
4.00 in
101.60 mm
1.638 in
41.61 mm
Configuring and Mounting the Drive
1.106 ± .050 in
28.09 ± 1.27 mm
0.626 ± .050 in
15.90 ± 1.27 mm
TOP OF LABEL
5 TYP
TEMPERATURE
CHECKPOINT
1.
1 22 ± .020 in
28 ± .51 mm
3X 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.1
MAXIMUM FASTENER
PENETRATION BOTH SIDES
2x 1.625 ± .020 in
41.28 ± .51 mm
2x 0.125 in
3.18 mm
4X 6-32 UNC-2B
3 MINIMUM THREAD DEPTH
0.1
MAXIMUM FASTENER
PENETRATION
2x 3.750 in
95.25 mm
0.138 in
3.51 mm
CL OF DRIVE
0.814 in
20.68 mm
Seagate IronWolf Product Manual, Rev. L 29
advertisement
Related manuals
advertisement
Table of contents
- 6 Seagate® Technology Support Services
- 7 Introduction
- 8 About the SATA interface
- 9 Drive Specifications
- 9 Specification summary tables
- 12 Formatted capacity
- 13 LBA mode
- 13 Default logical geometry
- 13 Seek time
- 13 Start/stop times
- 14 Power specifications
- 14 Power consumption
- 16 Typical current profile
- 16 Conducted noise
- 16 Voltage tolerance
- 17 Power-management modes
- 18 Environmental limits
- 18 Temperature
- 19 Humidity
- 19 Altitude
- 19 Shock
- 20 Vibration
- 20 Acoustics
- 20 Test for Prominent Discrete Tones (PDTs)
- 21 Electromagnetic immunity
- 21 Reliability
- 21 Annualized Failure Rate (AFR) and Mean Time Between Failures (MTBF)
- 22 HDD and SSD Regulatory Compliance and Safety
- 22 Regulatory models
- 22 Corrosive environment
- 22 Reference documents
- 23 Product warranty
- 24 Seagate® Rescue™ Data Recovery Service
- 26 Configuring and Mounting the Drive
- 26 Handling and static-discharge precautions
- 26 Configuring the drive
- 26 SATA cables and connectors
- 27 Drive mounting
- 31 SATA Interface
- 31 Hot-Plug compatibility
- 31 SATA device plug connector pin definitions
- 32 Supported ATA commands
- 34 Identify Device command
- 38 Set Features command
- 39 S.M.A.R.T. commands