advertisement
7. USB LED – illuminates when the unit receives USB bus power and is confirmed by the computer as connected and operating correctly.
8. DIRECT MONITOR – this switch determines how input sources are to be monitored and steps between three Direct Monitoring modes: OFF, MONO and STEREO. When set to OFF, monitoring of input sources is via the DAW; in MONO or STEREO, monitoring is taken directly from the preamp inputs and is therefore free of any possible latency effect. The symbols or
illuminate green to indicate selection of mono and stereo modes respectively.
9.
Headphone level – adjusts the output level at the front panel stereo headphone output.
10. Headphone socket – ¼” TRS output jack. If your headphones have a ¼” TRS jack plug, connect them directly; if they have a 3.5 mm TRS “mini jack”, use a
TRS ¼”-to-3.5 mm jack adaptor. Note that headphones fitted with 4-pole TRRS plugs will not operate correctly.
Back Panel
RIGHT LEFT
11 12 13
11. K (Kensington security lock) – secure your Scarlett 2i2 to a suitable structure if desired.
12.
USB 2.0 port – Type C connector; connect to your computer with cable supplied.
13. LINE OUTPUTS: LEFT and RIGHT – 2 x ¼” (6.35 mm) TRS jack sockets; +10 dBu output level
(variable), electronically balanced. Either ¼” TRS (balanced connection) or TS (unbalanced connection) jack plugs can be used.
17
advertisement
Key Features
- High-quality Focusrite analogue preamps
- Two balanced XLR/TRS combination inputs
- Two balanced TRS outputs
- High-impedance instrument input
- Headphone output with level control
- AIR function to model the sound of classic transformer-based ISA microphone preamps
- Direct Monitor feature for zero-latency monitoring in mono or stereo
- Class-compliant on macOS for plug-and-play operation