advertisement
▼
Scroll to page 2
of
34
Color profile: Disabled
Composite Default screen
DESK/TABLETOP INSTALLATION
TIP
When choosing a location for your phone, keep the base unit and the handset away from electrical noise caused by objects like motors and fluorescent lighting.
1) Plug the AC adapter cord into the
DC input jack on the back of the base, then place the AC adapter cord inside the molded strain relief.
2) Plug one end of the long telephone cord into the
TEL LINE jack on the base, then place the telephone cord into the right molded channel cord holder.
3) Plug the other end of the long telephone cord into the telephone wall jack.
(Remember, the phone must be fully charged before you can use it.)
4
C:...EXI 6960H1-5 VA.vp
Thu Nov 18 10:10:53 1999
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 5 Welcome
- 5 Features
- 6 Included in Your Package
- 7 Installing and Adjusting Your Phone
- 7 Desk/Tabletop Installation
- 8 Wall Installation
- 14 Installing the Handset Battery Pack
- 15 Charging the Battery Pack
- 15 Cleaning the Battery Contacts
- 16 Setting the Pulse/Tone Switch
- 16 Adjusting the Ringer and volume Controls
- 17 Using the Page Feature
- 17 Automatic Digital Code Security
- 18 Using Your New Phone
- 18 Making and Receiving Calls
- 18 Flash and Call Waiting
- 19 Storing a Phone Number in Memory
- 20 Editing a Phone Number in Memory
- 21 Erasing a Number from Memory
- 22 Using Memory Dialing
- 22 Chain Dialing
- 23 Using Caller ID
- 28 Using Redial
- 28 Using the Tone Feature
- 28 Selecting a Different Channel
- 29 Traveling Out-of-Range
- 30 Troubleshooting
- 30 Quick Reference Chart
- 32 Specifications
- 28 Thu Nov