Sound adjustments. JVC KD-AR270J, KD-AR270 - Radio / CD, KD-G220J, KD-G220

Sound adjustments

You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer).

Adjusting the sound

You can adjust the sound characteristics to your preference.

Ex.: When “ROCK” is selected

* 1 Displayed only when “L/O MODE” is set to

“WOOFER” (see page 11).

Preset values

BAS

(bass)

TRE

(treble)

LOUD

(loudness)

Indication (For)

USER

(Flat sound)

ROCK

(Rock or disco music)

CLASSIC

(Classical music)

POPS

(Light music)

HIP HOP

(Funk or rap music)

JAZZ

(Jazz music)

00

+02

00

+03 +01

OFF

ON

+01 –02 OFF

+04 +01 OFF

00 ON

+02 +03 OFF

Indication, [Range]

BAS * 2 (bass), [–06 to +06]

Adjust the bass.

TRE * 2 (treble), [–06 to +06]

Adjust the treble.

FAD * 3 (fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL * 4 (balance), [L06 to R06]

Adjust the left and right speaker balance.

LOUD * 2 (loudness), [LOUD ON or LOUD OFF]

Boost low and high frequencies to produce a well-balanced sound at low volume level.

SUB. W * 5 (subwoofer), [00 to 08]

Adjust the subwoofer output level when a subwoofer is connected.

VOL (volume), [00 to 30 or 50 * 6 ]

Adjust the volume.

* 2 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

* 3 If you are using a two-speaker system, set the fader level to “00.”

* 4 This adjustment cannot affect the subwoofer output.

* 5 This takes effect only when a subwoofer is connected.

* 6 Depending on the amplifier gain control setting. (See page 11 for details.)

9