Sound adjustments. JVC KD-AR270J, KD-AR270 - Radio / CD, KD-G220J, KD-G220

Sound adjustments

You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer).

1

Adjusting the sound

You can adjust the sound characteristics to your preference.

1

2

2

Ex.: When “ROCK” is selected

Preset values

Indication (For)

USER

(Flat sound)

BAS TRE LOUD

(bass) (treble) (loudness)

00 00 OFF

ROCK

(Rock or disco music)

CLASSIC

(Classical music)

POPS

(Light music)

HIP HOP

(Funk or rap music)

JAZZ

(Jazz music)

+03 +01 ON

+01 –02 OFF

+04 +01 OFF

+02 00 ON

+02 +03 OFF

Indication, [Range]

BAS * 4 (bass), [–06 to +06]

Adjust the bass.

TRE * 4 (treble), [–06 to +06]

Adjust the treble.

FAD * 5 (fader), [R06 to F06]

Adjust the front and rear speaker balance.

BAL (balance), [L06 to R06]

Adjust the left and right speaker balance.

LOUD * 4 (loudness), [LOUD ON or LOUD OFF]

Boost low and high frequencies to produce a well-balanced sound at low volume level.

VOL (volume), [00 to 30 or 50 * 6 ]

Adjust the volume.

* 4 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

* 5 If you are using a two-speaker system, set the fader level to “00.”

* 6 Depending on the amplifier gain control setting. (See page 13 for details.)

11