- Vehicles & accessories
- Motor vehicle electronics
- Car media receivers
- Kenwood
- KMD-PS970R
- Instruction manual
advertisement
MD/External disc control features
Playing MDs
Playing MDs:
Press the ¡ (EJECT) button to slide open the faceplate, showing the MD (insertion) slot. Insert the MD in the proper orientation. The faceplate will show the control panel, and the
MD will start playing.
The ¢ indicator will light when an MD has been inserted.
Playing MDs Already Inserted:
Press the SRC button repeatedly until the MD mode is obtained. "MD" is displayed when the MD mode has been selected.
The MD will start playing.
Pausing and Restarting MD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the ¡ (EJECT) button. The faceplate will slide to eject the MD.
Press the ¡ (EJECT) button to show the control panel.
2 CAUTION
Do not attempt to insert an MD into the slot if another one is already there.
NOTE
• The sound will be temporarily muted whilst the faceplate is moving.
• The only buttons that will work during the eject state are the
¡ (EJECT), SRC, TI, and ATT buttons, as well as the volume control button.
Press the SRC button repeatedly to select the external disc control mode.
The disc will start playing.
NOTE
The external disc control mode will differ, depending on the unit that is connected.
Mode Display Examples
• "CD"...when a CD player is connected
• "DISC"...when a disc changer is connected
• "DISC-1", "DISC-2"...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the
38 button to make the disc pause.
Press the same button again to start play again.
NOTE
• When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it.
• Disc #10 is displayed as "0".
Switching Display for Discs
Switch the display that appears whilst discs are playing.
Switching Display for Discs:
Each time you press the DISP button, the display during disc play switches as follows.
Playing Other Disc mode
This function permits the connection of optional players and the playing of discs other than the loaded MD (in the current unit).
Playing Discs:
— 20 —
NOTE
Track time
Disc name (DNPS)
Disc title (Units featuring CD text/MD only)
Track title (Units featuring CD text/MD only)
advertisement
Related manuals
advertisement
Table of contents
- 3 Safety Precautions
- 6 Power
- 7 Switching Modes
- 7 Volume
- 7 Attenuator
- 7 Loudness
- 8 Menu System
- 9 Selecting Tuning Mode
- 10 Tuning
- 10 Local Seek Function
- 10 Monaural Reception
- 10 Station Preset Memory
- 11 Auto Memory Entry
- 12 Preset station seek with Programme service name
- 12 Clock display
- 12 Kenwood intelligent Twin IF (K2I)
- 13 RDS (Radio Data System)
- 13 EON (Enhanced Other Network)
- 13 Alarm
- 14 AF (Alternative Frequency) Function
- 14 Restricting RDS Region (Region Restrict Function)
- 14 Traffic Information Function
- 15 Auto TP Seek Function
- 15 Presetting Volume for Traffic Information/News
- 16 Text Scroll
- 16 Radio Text
- 16 Programme Type (PTY) Function
- 18 News Bulletin Function with PTY News Timeout Setting
- 20 Playing MDs
- 20 Playing Other Disc mode
- 20 Switching Display for Discs
- 21 Clock display
- 21 Fast Forwarding and Reversing Disc Play
- 21 Track Search
- 22 Disc Search
- 22 Track / Disc Repeat
- 22 Track Scan
- 22 Disc Scan
- 23 Text / Title Scroll
- 23 Random Play
- 24 Presetting Disc Names
- 25 Disc Name Preset Play (DNPP)
- 25 Magazine Random Play
- 26 Audio Control Setting
- 27 Switching Graphic Display
- 28 Switching Spectrum Analyzer Display
- 28 Dimmer
- 28 Automatic Dimmer Function
- 28 TEL Mute
- 29 Selectable Illumination
- 29 Touch Sensor Tone
- 29 Non-fading preout
- 30 Adjusting Time
- 30 Mask Key
- 31 Dual Zone System
- 32 Faceplate Angle Adjustment
- 32 Manual Open Switch Setting
- 32 Black Mask
- 33 Dimmer level adjustment
- 33 External Amp Control
- 33 Navigation Mute Function
- 34 Basic Operations of steering remote control
- 36 Accessories
- 36 Installation Procedure
- 37 Connecting Cables to Terminals
- 38 Installation
- 39 Removing the Unit
- 40 Attaching Steering Remote Control
- 41 Troubleshooting guide
- 44 Specifications